Zeitschrift (reviewed)
-
(2024): A Generalised Method for Friction Optimisation of Surface Textured Seals by Machine Learning, Lubricants 12 (1), 20
DOI: https://doi.org/10.3390/lubricants12010020 -
(2024): The role of pressure and friction forces in automated insertion of cochlear implants, Frontiers in Neurology 15, 1430694
DOI: https://doi.org/10.3389/fneur.2024.1430694 -
(2023): Investigating frictional contact behavior for soft material robot simulations, Meccanica (2023) 58:2165–2176
DOI: https://doi.org/10.1007/s11012-023-01719-5 -
(2023): Transient resonance passage of a mistuned bladed disk with and without underplatform dampers, International Journal of Turbomachinery, Propulsion and Power, 2023, 8(4), 38.
DOI: 10.3390/ijtpp8040038 -
(2023): Target Conflict for Force Transmission in Lateral and Longitudinal Direction of Rotated Tread Block Samples on Different Road Surfaces (Dry, Wet, Snow, and Ice), Tire Science And Technology
DOI: https://doi.org/10.2346/TST-22-011 -
(2023): Thermomechanical Modeling of Aircraft Tire-Runway Contact for Transient Maneuvers, Tire Science and Technology, TSTCA, Vol. 51, No. 2, April-June
DOI: https://doi.org/10.2346/tire.23.22012 -
(2023): Describing and Analyzing Mechanical Contact for Continuum Robots Using a Shooting-Based Cosserat Rod Implementation, IEEE Robotics and Automation Letters, VOL. 9, NO. 2
DOI: 10.1109/LRA.2023.3346272 -
(2022): Determining the Influence of Casing Vibrational Behaviour On Rotordynamics., ASME. J. Eng. Gas Turbines Power 144(5): 051012
DOI: 10.1115/1.4053123 -
(2022): Noise exposure during robot-assisted total knee arthrosplasty, Archives of Orthopedic and Trauma Surgery
DOI: 10.1007/s00402-022-04454-w -
(2022): Reduced Order Modeling of Forced Response in a Multistage Compressor Under Mistuning and Aerocoupling, ASME. J. Eng. Gas Turbines Power 144(11): 111017
DOI: https://doi.org/10.1115/1.4055368 -
(2021): Key Features of the Transient Amplification of Mistuned Systems, ASME. J. Eng. Gas Turbines Power. March 2021; 143(3): 031016.
DOI: 10.1115/1.4049501 -
(2021): Experimental and Numerical Investigation of Tire Tread Wear on Block Level, Lubricants, 9(12), 113
DOI: https://doi.org/10.3390/lubricants9120113 -
(2021): Investigation of the Influence of Snow Track Density on Tire Tread Block Traction by Experiments and Discrete Element Method Simulation, Tire Science and Technology
DOI: https://doi.org/10.2346/tire.21.20023 -
(2021): Single Nodal Diameter Excitation of Turbine Blades: Experimental and Theoretical Study., ASME. J. Eng. Gas Turbines Power. September 2021; 143(9): 091028.
DOI: https://doi.org/10.1115/1.4051172 -
(2021): Transient abrasion on a rubber sample due to highly dynamic contact conditions, Wear
DOI: https://doi.org/10.1016/j.wear.2021.203848 -
(2021): A Digital Twin for Friction Prediction in Dynamic Rubber Applications with Surface Textures, Lubricants 2021, 9(5), 57
DOI: https://doi.org/10.3390/lubricants9050057 -
(2020): Equivalent Linearization of Bladed Disk Assemblies with Friction Nonlinearities Under Random Excitation, Journal of Engineering for Gas Turbines and Power
DOI: 10.1115/1.4048407 -
(2020): Global detection of detached periodic solution branches of friction-damped mechanical systems., Nonlinear Dynamics. 99(2).
DOI: 10.1007/s11071-019-05425-4 -
(2020): The extended periodic motion concept for fast limit cycle detection of self-excited systems, Computers and Structures
DOI: 10.1016/j.compstruc.2019.106139 -
(2020): Experimental Investigation and Simulation of Aircraft Tire Wear, Tire Science and Technology (2021) 49 (1): 55-74
DOI: https://doi.org/10.2346/tire.20.180201 -
(2020): Application of Control-Based-Continuation for characterization of dynamic systems with stiffness and friction nonlinearities, Mechanics Research Communications
DOI: 10.1016/j.mechrescom.2020.103520 -
(2020): Dynamic Behavior of Fractional Viscoelastic Tire Tread Blocks on Different Ice Surfaces, Tire Science and Technology
DOI: https://doi.org/10.2346/tire.20.190001 -
(2020): Performance of CrCN-WS2 hard/soft composite coated tools in dry cutting of titanium alloys, Journal of Manufacturing Processes, 54, pp.201-209
DOI: https://doi.org/10.1016/j.jmapro.2020.03.014 -
(2020): Investigations on the mechanism of microweld changes during ultrasonic wire bonding by molecular dynamics simulation, Materials & Design, 192, 108718
DOI: https://doi.org/10.1016/j.matdes.2020.108718 -
(2020): Experimental assessment of polynomial nonlinear state-space and nonlinear-mode models for near-resonant vibrations, Mechanical Systems and Signal Proocessing
DOI: 10.1016/j.ymssp.2020.106796 -
(2020): Flaw Detection on a Tilted Particleboard by Use of the Spec-Radiation Method, MDPI Appl. Sci. Weitere Informationen
DOI: https://doi.org/10.3390/app10238513 -
(2020): Investigation and Enhancement of the Detectability of Flaws with a Coarse Measuring Grid and Air Coupled Ultrasound for NDT of Panel Materials Using the Re-Radiation Method, MDPI-applied science | Datei |
DOI: 10.3390/app10031155 -
(2020): The Spec-Radiation Method as a Fast Alternative to the Re-Radiation Method for the Detection of Flaws in Wooden Particleboards, MDPI Appl. Sci. 2020, 10, 6663 | Datei |
DOI: https://doi.org/10.3390/app10196663 -
(2020): A Model Order Reduction Method for Bladed Disks with Large Geometric Mistuning using a Partially Reduced Intermediate System Model, J. Eng. Gas Turbines Power
DOI: 10.1115/1.4049357 -
(2020): Hyperchaos co-existing with periodic orbits in a frictional oscillator, Journal of Sound and Vibration
DOI: https://doi.org/10.1016/j.jsv.2020.115203 -
(2020): Design, preparation and cutting performance of bionic cutting tools based on head microstructures of dung beetle, Journal of Manufacturing Processes, 58, pp.129-135
DOI: https://doi.org/10.1016/j.jmapro.2020.07.057 -
(2020): Performance of soft/hard composite dual-effect coated tool in dry cutting of carbon fiber–reinforced polymer, The International Journal of Advanced Manufacturing Technology, 109, pp.2221-2232
DOI: https://doi.org/10.1007/s00170-020-05778-w -
(2019): Analysis of Contacts in Friction Damped Turbine Blades using Dimensionless Numbers, J. Eng. Gas Turbines Power. Dec 2019, 141(12): 121023 (7 pages)
DOI: 10.1115/1.4044481 -
(2019): Theoretical and experimental investigations of ultrasonic sound fields in thin bubbly liquid layers for ultrasonic cavitation peening, Ultrasonics, 93, pp.130-138
DOI: https://doi.org/10.1016/j.ultras.2018.11.010 -
(2019): Super-elastic ultrasoft natural rubber-based piezoresistive sensors for active sensing interface embedded on soft robotic actuator, Applied Materials Today, Volume 25
DOI: https://doi.org/10.1016/j.apmt.2021.101219 -
(2019): Surface integrity of turned laser-welded hybrid shafts, Production Engineering
DOI: 10.1007/s11740-018-0862-8 -
(2019): Measured and Simulated Forced Response of a Rotating Turbine Disk with Asymmetric and Cylindrical Underplatform Dampers, Journal of Engineering for Gas Turbines and Power
DOI: 10.1115/1.4045337 -
(2019): Comparison of different harmonic balance based methodologies for computation of nonlinear modes of non-conservative mechanical systems, Mech. Syst. Signal Process. 127 (2019), 159-171
DOI: 10.1016/j.ymssp.2019.03.005 -
(2019): Constitutive modeling and deformation analysis for the ultrasonic-assisted incremental forming process, The International Journal of Advanced Manufacturing Technology 104, pp.2287–2299
DOI: https://doi.org/10.1007/s00170-019-04031-3 -
(2019): Impacts of ultrasound on oxide removal–An attempt towards acid-free cleaning, Ultrasonics sonochemistry, 57, pp.1-11
DOI: https://doi.org/10.1016/j.ultsonch.2019.05.003 -
(2019): Quantification of the energy flows during ultrasonic wire bonding under different process parameters, International Journal of Precision Engineering and Manufacturing-Green Technology, 6(3), pp.449-463
DOI: https://doi.org/10.1007/s40684-019-00061-0 -
(2019): Contact mechanics and friction processes in ultrasonic wire bonding-Basic theories and experimental investigations, Journal of Sound and Vibration, p.115021
DOI: https://doi.org/10.1016/j.jsv.2019.115021 -
(2019): Influence of ultrasonic amplitude and position in the vibration distribution on the microstructure of a laser welded aluminum alloy, Journal of Laser Applications 31
-
(2019): Reduced-Order Modeling of Bladed Disks Considering Small Mistuning the Disk Sectors, J. Eng. Gas Turbines Power. May 2019, 141(5): 052502 (7 pages)
DOI: 10.1115/1.4041071 -
(2019): On the use of non-Gaussian models for statistical description of road micro-surface profiles, Int. J. Vehicle Systems Modelling and Testing, Vol. 13, No. 3, pp.260–274
DOI: 10.1504/IJVSMT.2019.101551 -
(2019): On the use of complex numbers in equations of nonlinear structural dynamics, Mech. Syst. Signal Process. 126 (2019), 626-635
DOI: 10.1016/j.ymssp.2019.02.041 -
(2019): Discussion of “Dynamic Modeling and Projection-Based Reduction Methods for Bladed Disks with Nonlinear Frictional and Intermittent Contact Interfaces” (Mitra, M., Epureanu, B. I., 2018, ASME Appl. Mech. Rev., 71(5), p. 050803)., ASME. Appl. Mech. Rev. September 2019; 71(5): 055502.
DOI: 10.1115/1.4044933 -
(2018): On developing an optimal design procedure for a bimorph piezoelectric cantilever energy harvester under a predefined volume, Mechanical Systems and Signal Processing 106 (2018): 1-12
-
(2018): Design and characterization of the lateral actuator of a bimodal tactile display with two excitation directions, Displays, Volume 54, September 2018, Pages 34-46 | Datei |
DOI: https://doi.org/10.1016/j.displa.2018.09.002 -
(2018): Capability evaluation of ultrasonic cavitation peening at different standoff distances., Ultrasonics
DOI: /10.1016/j.ultras.2017.10.013 -
(2018): Transient amplitude amplification of mistuned structures: An experimental validation, J. Sound and Vibration 436 (2018) 236–252
DOI: 10.1016/j.jsv.2018.07.031 -
(2018): Approximate Solution of the Fokker–Planck Equation for a Multidegree of Freedom Frictionally Damped Bladed Disk Under Random Excitation, J. Eng. Gas Turbines Power. 2018; 141(1):011004-011004-8, Paper No: GTP-18-1279
DOI: 10.1115/1.4040740 -
(2018): Influence of surface form deviations on friction in mixed lubrication, Tribology International, Volume 118, 491-499
DOI: https://doi.org/10.1016/j.triboint.2017.05.032 -
(2018): Impact of time on ultrasonic cavitation peening via detection of surface plastic deformation, Ultrasonics
DOI: /10.1016/j.ultras.2017.12.001 -
(2018): Rig and Engine Validation of the Nonlinear Forced Response Analysis Performed by the Tool OrAgL, J. Eng. Gas Turbines Power. 2018; 141(1):011004-011004-8, Paper No: GTP-18-1279
DOI: 10.1115/1.4041160 -
(2018): Rotational Speed-Dependent Contact Formulation for Nonlinear Blade Dynamics Prediction, J. Eng. Gas Turbines Power. 2018; 141(4):042503-042503-11
DOI: 10.1115/1.4040843 -
(2018): Influence of Geometric Design Parameters onto Vibratory Response and HCF Safety for Turbine Blades with Friction Damper, J. Eng. Gas Turbines Power. 2018; 141(4):041022-041022-10
DOI: 10.1115/1.4040732 -
(2018): Combined Airfoil and Snubber Design Optimization of Turbine Blades With Respect to Friction Damping, J. Turbomach. 2018; 140(8):081007-081007-11, TURBO-18-1048
DOI: 10.1115/1.4040679 -
(2018): Closed Loop Cavitation Control - A Step Towards Sonomechatronics, Ultrasonics Sonochemistry
DOI: /10.1016/j.ultsonch.2018.01.021 -
(2018): Self-sensing cavitation detection in ultrasound-induced acoustic cavitation, Ultrasonics
DOI: /10.1016/j.ultras.2018.06.016 -
(2018): Effects of process parameters on force reduction and temperature variation during ultrasonic assisted incremental sheet forming process, The International Journal of Advanced Manufacturing Technology, pp. 1-12
DOI: https://doi.org/10.1007/s00170-018-1886-0 -
(2018): Self-Cleaning Mechanisms in Ultrasonic Bonding of Al Wire, Journal of Materials Processing Technology 258, pp. 58-66
DOI: https://doi.org/10.1016/j.jmatprotec.2018.03.016 -
(2018): Revealing of ultrasonic wire bonding mechanisms via metal-glass bonding, Materials Science and Engineering: B
DOI: https://doi.org/10.1016/j.mseb.2018.11.010 -
(2018): Laser welding of dissimilar low-alloyed steel-steel butt joints and the effects of beam position and ultrasound excitation on the microstructure, Journal of Laser Applications 30, 3, 032417
-
(2018): Reliability-Based Performance Optimization of Tunnel Boring Machine Considering Geological Uncertainties, IEEE Access 6, pp. 19086 - 19098
DOI: 10.1109/ACCESS.2018.2821190 -
(2018): Intentional Response Reduction by Harmonic Mistuning of Bladed Disks with Aerodynamic Damping, J. Eng. Gas Turbines Power. 2018;140(12):121010-121010-10
DOI: 10.1115/1.4040898 -
(2017): A Study on Bandwidth and Performance Limitations of Array Vibration Harvester Configurations, Energy Harvesting and Systems
-
(2017): Experimental Study on Performance Enhancement of a Piezoelectric Vibration Energy Harvester by applying Self-Resonating Behavior, Energy Harvesting and Systems, Oct. 2017
DOI: 10.1515/ehs-2016-0027 -
(2017): Effect of different standoff distance and driving current on transducer during ultrasonic cavitation peening., Sensors and Actuators A: Physical.
DOI: /10.1016/j.sna.2017.05.002 -
(2017): Investigation of the joining zone of laser welded and cross wedge rolled hybrid parts, International Journal of Material Forming
DOI: 10.1007/s12289-017-1393-0 -
(2017): Characterization of Mechanical Properties of Pseudoelastic Shape Memory Alloys under Harmonic Excitation, Materials Research Express (2017)
DOI: https://doi.org/10.1088/2053-1591/aa9bac -
(2017): A Taylor Series Expansion Approach for Nonlinear Blade Forced Response Prediction Considering Variable Rotational Speed, J. Eng. Gas Turbines Power 139(6), 062503
DOI: 10.1115/1.4035286 -
(2017): Self-Sensing with Loaded Piezoelectric Bending Actuators, Sensors and Actuators A, Physical, Volume 263, August 2017, Pages 737-743
-
(2017): Toward understanding the self-adaptive dynamics of a harmonically forced beam with a sliding mass, Archive of Applied Mechanics
-
(2017): Investigation of Snow Milling Mechanics to Optimize Winter Tire Traction, Tire Science and Technology 45 (3), 162-174
DOI: 10.2346/tire.17.450302 -
(2017): A review on the mechanisms of ultrasonic wedge-wedge bonding, Journal of Materials Processing Technology, 245, 2017, pp. 241-258
-
(2017): Influence of Silicon on the Structure And Weldability of Steel-Aluminium Joints Processed by Non-Vacuum Electron Beam Welding, International Journal of Emerging Technology and Advanced Engineering, Volume 7, Issue 9, September 2017, p. 348-356
-
(2017): A control system for ultrasound devices utilized for inactivating E. coli in wastewater, Ultrasonics Sonochemistry
DOI: 10.1016/j.ultsonch.2017.04.017 -
(2017): High Order Sensitivity Analysis of a Mistuned Blisk Including Intentional Mistuning, J. of Theoretical and Applied Mechanics 55, 1, 353-368
DOI: 10.15632/jtam-pl.55.1.353 -
(2017): Calculation of volumetric sound field of pulsed air-coupled ultrasound transducers based on single plane measurements, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control (IEEE UFFC), 65 (1), pp. 72-84
-
(2017): A Rod Type Linear Ultrasonic Motor Utilizing Longitudinal Traveling Waves: Proof of Concept, Smart Materials and Structures, 26 (2017) 085013
-
(2017): Reduced Order Modeling of Mistuned Bladed Disks under Rotation, Technische Mechanik, 37, 2-5, (2017), S. 314 – 325
DOI: https://doi.org/10.24352/UB.OVGU-2017-107 -
(2016): A Self-Resonant System-Experimental Investigations of Boundary and Operating Conditions, PAMM 16, 1, pp. 253-254, October
DOI: 10.1002/pamm.201610115 -
(2016): Modal interaction in ultrasonic welding block sonotrodes induced by the mistuning of the material properties, Journal of Sound and Vibration 318, pp. 1-13, October
DOI: 10.1016/j.jsv.2016.06.021 -
(2016): Prüfstand mit piezoelektrischen Schwingungserzeugern zur Ermittlung der dynamischen Steifigkeit von Elastomerbauteilen, Forschung im Ingenieurwesen 80, 1-2, pp. 29-40 June
DOI: 10.1007/s10010-016-0204-y -
(2016): An efficient method for approximating resonance curves of weakly-damped nonlinear mechanical systems, Computers & Structures, 169. Jg., S. 81-90
DOI: 10.1016/j.compstruc.2016.03.003 -
(2016): Analysis of an experimental setup for structural damping identification, Journal of Theoretical and Applied Mechanics 54, 1, 27-39
DOI: 10.15632/jtam-pl.54.1.27 -
(2016): At the Fingertip, wie Maschinen fühlen, Unimagazin Ausgabe 3/4 2016, Robotik, von Mensch zu Maschine
-
(2016): Intracochlear Stimulation of the Basilar Membrane, Biomed Tech 61, p.179
DOI: 10.1515/bmt-2016-5014 -
(2016): A Method to Reduce the Energy Localization in Mistuned Bladed Disks by Application-Specific Blade Pattern Arrangement, Journal of Engineering for Gas Turbines and Power 138, 9, pp. 092502-1 – 092502-10
DOI: 10.1115/1.4032739 -
(2016): On the efficacy of friction damping in the presence of nonlinear modal interactions, Journal of Sound and Vibration in press, pp. 12
DOI: 10.1016/j.jsv.2016.01.039 -
(2016): On the Interaction of Multiple Traveling Wave Modes in the Flutter Vibrations of Friction-Damped Tuned Bladed Disks, J. Eng. Gas Turbines Power 139(4), 042501
DOI: 10.1115/1.4034650 -
(2016): Transiente Ultraschallfeldvisualisierung von Transmissionsvorgängen an Platten auf Basis der Refraktovibrometrie, TM – Technisches Messen 83, 10, pp. 580-592, October
DOI: 10.1515/teme-2016-0003 -
(2016): Experimental and Numerical Simulation of the Dynamic Frictional Contact between Aircraft Tire Rubber and a Rough Surface, Lubricants: 4(3), 29
DOI: 10.3390/lubricants4030029 -
(2016): 1945. Self-sensing cavitation detection capability of horn geometries for high temperature application, Journal of Vibroengineering 18, 2, pp. 989-998, March
-
(2016): Determination of optimal excitation patterns for local mechanical inner ear stimulation using a physiologically-based model, Biomedical Microdevides 18, 2, Kapitel 36, April
DOI: 10.1007/s10544-016-0061-3 -
(2016): Track P. Medical Implants/Implant Development, Biomedical Engineering 61, 1, pp. 179-199
DOI: 10.1515/bmt-2016-5014
ISBN: ISSN (online) 1862-278X, ISSN (print) 0013-5585 -
(2016): Historical development of IWPMA: 10 years of research on piezoelectric materials and actuators, Archive of Applied Mechanics 86, 10, pp. 1693-1695, October
DOI: 10.1007/s00419-016-1157-1 -
(2015): Transient Amplitude Amplification of Mistuned Blisks, J. Eng. Gas Turbines Power 137, 112502-1
DOI: 10.1115/1.4030278 -
(2015): Frequency veering and mode degeneration of a rectangular disc, PAMM 15 (1), 175-176
DOI: 10.1002/pamm.201510078 -
(2015): Influences of Non-axial Process Loads on the Transducer and the Associated Mounting in Ultrasonic Machining, Energy Harvesting and Systems
DOI: 10.1515/ehs-2014-0022
ISBN: ISSN (Online) 2329-8766, ISSN (Print) 2329-8774 -
(2015): Introduction and Evaluation of a Damping Determination Method Based on the Short-Term Fourier Transform and Resampling (STFR), Journal of Theoretical and Applied Mechanics 53, 2, 395-407
DOI: 10.15632/jtam-pl.53.2.395 -
(2015): Modeling and Experimental Investigation of a Periodically Excited Hybrid Energy-Harvesting Generator, Energy Harvesting and Systems
DOI: 10.1515/ehs-2014-0043 -
(2015): Optimization of a Piezoelectric Bending Actuator for a Tactile Virtual Reality Display, Energy Harvesting and Systems
-
(2015): Motion Complexity in a Non-Classically Damped System with Closely Spaced Modes: From Standing to Traveling Waves, Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multibody Dynamics
DOI: 10.1177/1464419315593431 -
(2015): Absorption of Resonant Vibrations in Tuned Nonlinear Jointed Structures, ASME Journal of Vibration and Acoustics 138 (2), 8 pp.
DOI: 10.1115/1.4032000 -
(2015): Global complexity effects due to local damping in a nonlinear system in 1:3 internal resonance, Archive of Applied Mechanics, 12 pp.
DOI: 10.1007/s00419-015-1080-x -
(2015): Custom Lithium Niobate Transducers for Detecting Material Distribution of Hybrid Workpieces, Energy Harvesting and Systems. Band 2, Heft 3-4, Seiten 137–142
DOI: 10.1515/ehs-2014-0045
ISBN: ISSN (Online) 2329-8766, ISSN (Print) 2329-8774 -
(2015): Investigation of Process Forces of Ultrasonically Assisted Scratch Tests, Proceedings of the 3rd International Conference on Stone and Concrete Machining (ICSCM), November 2-3, Bochum, S. 137-145
DOI: 10.13154/icscm.3.2015.137-145 -
(2015): A New Test Rig for Experimental Studies of Drillstring Vibrations, SPE Drilling & Completion 30 (2), pp. 119-128
DOI: 10.2118/176019-PA -
(2014): A Method for the Computational Assessment of the Damping Performance of Shape Memory Alloys, Smart Materials and Structures 23, 10 pp.
DOI: 10.1088/0964-1726/23/8/085010 -
(2014): On the Computation of the Slow Dynamics of Nonlinear Modes of Mechanical Systems, Mechanical Systems and Signal Processing 42 (1-2), 71-87
DOI: 10.1016/j.ymssp.2013.08.031 -
(2014): Reliability Optimization of Friction-Damped Systems Using Nonlinear Modes, Journal of Sound and Vibration 333, 2699–2712
DOI: 10.1016/j.jsv.2014.02.008 -
(2014): Experimental Friction and Temperature Investigation on Aircraft Tires, Tire Science and Technology: 42 (3), 116-144
ISBN: ISSN (online): 0090-8657 -
(2013): Improved Piezoelectric Switch Shunt Damping Technique Using Negative Capacitance, Journal of Sound and Vibration, 332 (1), pp. 7-16
DOI: 10.1016/j.jsv.2012.08.001 -
(2013): A High-Order Harmonic Balance Method for Systems with Distinct States, Journal of Sound and Vibration 332 (21): 5476-5488
DOI: 10.1016/j.jsv.2013.04.048 -
(2013): A Method for Nonlinear Modal Analysis and Synthesis: Application to Harmonically Forced and Self-Excited Mechanical Systems, Journal of Sound and Vibration 332 (25): 6798–6814
DOI: 10.1016/j.jsv.2013.08.009 -
(2013): Reduced Order Modeling Based on Complex Nonlinear Modal Analysis and its Application to Bladed Disks with Shroud Contact, J. Eng. Gas Turbines Power 135 (10), 102502–102509
DOI: 10.1115/1.4025002 -
(2013): Transient Amplitude Behavior Analysis of Nonlinear Power Ultrasonic Transducers with Application to Ultrasonic Squeeze film levitation, Journal of Intelligent Material Systems and Structures, 24 (6), pp. 745-752
DOI: 10.1177/1045389X12463460 -
(2013): On the Maximum Damping Performance of Piezoelectric Switching Techniques, Journal of Intelligent Material Systems and Structures, 24 (6), pp. 717-728
DOI: 10.1115/SMASIS2011-5114 -
(2013): Energy Dissipation of Synchronized Switch Damping with Piezoceramics Using Negative Capacitance, Solid State Phenomena, Vol. 198, pp. 483-488
DOI: 10.4028/www.scientific.net/SSP.198.483
ISBN: 978-3-03785-637-6 -
(2013): Vibration Damping with Shunted Piezoceramics: Fundamentals and Technical Applications, Mechanical Systems and Signal Processing, 36 (1), pp. 36-52
DOI: 10.1016/j.ymssp.2011.05.011 -
(2013): Tyre Tread-Block Friction: Modeling, Simulation and Experimental Validation, Vehicle System Dynamics, 51 (7), pp. 1017-1026
-
(2013): Modeling of a Nonlinear Vibration-Based Energy Harvesting System as a Duffing Oscillator, Diffusion and Defect Data Pt.B: Solid State Phenomena, 198, pp. 663-668
DOI: 10.4028/www.scientific.net/SSP.198.663 -
(2013): An Ultrasonic Levitation Journal Bearing able to Control Spindle Center Position, Mechanical Systems and Signal Processing, 36 (1), pp. 168-181
DOI: 10.1016/j.ymssp.2012.05.006 -
(2013): Beam model for tyre tread block dynamics, International Journal of Vehicle Noise and Vibration, Volume 9, Issue 3-4, pp. 312-333
DOI: 10.1504/IJVNV.2013.055812 -
(2012): Ultrasonic-assisted machining of stone, Production Engineering, 6 (2), pp. 587-594
DOI: 10.1007/s11740-011-0330-1 -
(2012): Eddy Current Damper for Turbine Blading: Electromagnetic Finite Element Analysis and Measurement Results, J. Eng. Gas Turbines Power 134, 042504
DOI: 10.1115/1.4004734 -
(2012): Transient amplitude behavior analysis of nonlinear power ultrasonic transducers with application to ultrasonic squeeze film levitation, Journal of Intelligent Material Systems and Structures
DOI: 10.1177/1045389X12463460 -
(2012): An Experimental Method for the Phase Controlled Frequency Response Measurement of Nonlinear Vibration Systems, PAMM Volume 12, Issue 1
DOI: 10.1002/pamm.201210117 -
(2012): Shunted piezoceramics for vibration damping - Modeling, applications and new trends, Smart actuation and sensing systems - Recent advances and future challenges, InTech
DOI: 10.5772/50609
ISBN: 979-953-307-990-4 -
(2012): On the maximum damping performance of piezoelectric switching techniques, Journal of Intelligent Material Systems and Structures
DOI: 10.1177/1045389X12445645 -
(2012): A new solution for the determination of the generalized coupling coefficient for piezoelectric systems, Journal of Vibroengineering, Vol. 14, Issue 1, pp. 105-110
ISBN: ISSN: 1392-8716 -
(2012): Investigation of Friction Mechanisms of Siped Tire Tread Blocks on Snowy and Icy Surfaces, Tire Science and Technology, TSTCA, Vol. 40, No. 1, pp. 1-24
-
(2012): Bandbreitensteigerung von piezoelektrischen Energy Harvesting Systemen durch Magnetkräfte, AT – Automatisierungstechnik 60 (2012) 7, Oldenbourg Wissenschaftsverlag, pp. 384-391
DOI: 10.1524/auto.2012.1011 -
(2012): Analysis of Ultrasonic Vibro-Impact Systems with Equivalent Circuits and the Harmonic Balance Method, Sensors and Actuators A: Physical, Elsevier
DOI: 10.1016/j.sna.2012.10.007 -
(2012): An ultrasonic levitation journal bearing able to control spindle center position, Mechanical Systems and Signal Processing
DOI: 10.1016/j.ymssp.2012.05.006 -
(2011): Kinematic model for ultrasonic-assisted manufacturing of bore holes with undefined cutting edges, Journal of Advanced Materials Research 223 (2011), pp. 794 – 803
DOI: 10.4028/www.scientific.net/AMR.223.794 -
(2011): Enhanced switching law for synchronized switch damping on inductor with bimodal excitation, Journal of Sound and Vibration, Vol. 330, Number 2, pp. 2707-2720
DOI: 10.1016/j.jsv.2011.01.003 -
(2011): Vibration damping with shunted piezoceramics: Fundamentals and technical applications, Mechanical Systems and Signal Processing (MSSP), Vol. 36, Issue 1
DOI: 10.1016/j.ymssp.2011.05.011 -
(2011): Theoretical and Experimental Investigations of Piezoelectrically Excited Travelling Waves in Cylindrical Tubes, Proc. Appl. Math. Mech. 11 (2011), pp. 641 - 642
DOI: 10.1002/pamm.201110310 -
(2010): Cost Optimization of Hybrid Composite Flywheel Rotors for Energy Storage, Structural and Multidisciplinary Optimization, 41(5), S. 779‐796
DOI: 10.1007/s00158-009-0469-y -
(2010): Cost optimization of a Hybrid Composite Flywheel Rotor with a Split-Type Hub using combined analytical/numerical Models , In: Structural and Multidisciplinary Optimization, S. 1-17.
-
(2010): Eddy Current Damping - A Concept Study For Steam Turbine Blading, J. Eng. Gas Turbines Power 132(5), 052505-1-052505-7
DOI: 10.1115/1.3205032 -
(2010): Parametric Studies on the Harvested Energy of Piezoelectric Switching Techniques, Journal Smart Materials and Structures, Vol. 19, Number 2.
DOI: 10.1088/0964-1726/19/2/025001 -
(2010): Stability Analysis of a Disc Brake with Piezoelectric Self-Sensing Technique, SAE International Journal of Passenger Cars – Mechanical Systems, Vol. 2, No. 2, pp. 24-31
DOI: 10.4271/2009-01-3034
ISBN: 1946-4002 -
(2010): Prestressing piezoelectric actuators by using superelastic shape memory alloys, J. Korean Phys. Soc., 57(4):889–891
ISBN: ISSN: 0374-4884 -
(2010): Multiharmonic Forced Response Analysis of a Turbine Blading Coupled by Nonlinear Contact Forces, J. Eng. Gas Turbines Power 132(8), 082501-1-082501-9
DOI: 10.1115/1.4000266 -
(2009): Dynamics of a siped tire tread block – experiment and simulation, Tire Science and Technology, TSTCA, Vol. 37, No. 4, pp. 323-339
-
(2009): Influence of surface treatment of elastomers on their frictional behaviour in sliding contact, Wear 266, Nr. 3/4, S. 468-475
DOI: 10.1016/j.wear.2008.04.040 -
(2003): Spatial Dynamics of Tuned and Mistuned Bladed Disks with Cylindrical and Wedge Shaped Friction Dampers, Int J. of Rotating Machinery (9)3, 219-228
DOI: 10.1155/S1023621X03000198 -
(2003): Vibration Damping by Friction Forces - Theory and Applications, J. Vibration and Control (9)3-4, 419-448
DOI: 10.1177/107754603030780
Konferenz (reviewed)
-
(2023): Transient resonance passage of a mistuned bladed disk with and without underplatform dampers, Proceedings of 15th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics (ETC15), Budapest, April 24-28, 2023.
-
(2023): Geometrically Mistuned Blisks: Strain Gauge and Tip Timing Vibration Measurements of Rotating Blades with and Without Underplatform Dampers, Rinderknecht, S.; Schüßler, B.; Schwarz, S. (Hrsg.) (2023): Proceedings of SIRM 2023 - The 15th European Conference on Rotordynamics. Darmstadt, Germany, 22.-24.02.2023
DOI: 10.26083/tuprints-00024057 -
(2023): Experimental and Numerical Analysis of Rotational Speed Influence on the Nonlinear Dynamic of Turbine Blades with Shroud Coupling, Proceedings of the International Gas Turbine Congress 2023, November 26 - Dezember 1, Kyoto, Japan, 2023
-
(2023): Investigations on Laterally Coupled Rotor‐Blade‐Vibrations, In: Rinderknecht, S.; Schüßler, B.; Schwarz, S. (Hrsg.) (2023): Proceedings of SIRM 2023 - The 15th European Conference on Rotordynamics. Darmstadt, Germany, 22.-24.02.2023
DOI: 10.26083/tuprints-00024057 -
(2023): Geometrically Mistuned Blisks: Assessment of Geometric Uncertainties and Finite‐Element Mesh Morphing, Rinderknecht, S.; Schüßler, B.; Schwarz, S. (Hrsg.) (2023): Proceedings of SIRM 2023 - The 15th European Conference on Rotordynamics. Darmstadt, Germany, 22.-24.02.2023
DOI: 10.26083/tuprints-00024057 -
(2022): Investigation of Lateral Compression Effects in Fiber Reinforced Soft Pneumatic Actuators, 2022 International Conference on Electrical, Computer, Communications and Mechatronics Engineering (ICECCME)
DOI: 10.1109/ICECCME55909.2022.9988565 -
(2022): Interface Reduction in an Equivalent Linearization Algorithm for Nonlinearly Coupled Systems Under Random Excitation, ASME 2022 Turbo Expo
DOI: 10.1115/GT2022-78367 -
(2022): Supply Chain Simulation as a Service to Increase Adaption Capability in Manufacturing, 2022 Annual Modeling and Simulation Conference (ANNSIM)
-
(2022): Reduced Order Modeling of Forced Response in a Multistage Compressor Under Mistuning and Aerocoupling, ASME paper GT2022-81090, Int. Gas Turbine & Aeroeng. Congress and Exh., Rotterdam, 2022, pp. 1-12
DOI: http://dx.doi.org/10.1115/GT2022-81090 -
(2022): An Improved Reduced Order Model for Bladed Disks Including Multistage Aeroelastic and Structural Coupling, Proceedings of Global Power and Propulsion Society GPPS Chania22, 18th–20th September, 2022.
DOI: 10.33737/gpps22-tc-106 -
(2021): Determining the influence of casing vibrational behaviour on rotordynamics, Paper ID-021, SIRM 14th International Conference on Dynamics of Rotating Machines, Gdańsk, Poland, 17th –19th February, 2021
-
(2021): A Preliminary Study of Soft Material Robotic Modelling: Finite Element Method and Cosserat Rod Model, 9th International Conference on Control, Mechatronics and Automation (ICCMA)
DOI: doi: 10.1109/ICCMA54375.2021.9646194 -
(2021): Calculation of Nonlinear Systems under Narrow Band Excitation Using Equivalent Linearization and Path Continuation, ASME paper GT2021-58437, Int. Gas Turbine & Aeroeng. Congress and Exh., virtual
DOI: 10.1115/GT2021-58437 -
(2021): Development of a Multi-Shaker-Control to Investigate the Influence of the Interblade Phase Angle on Frictionally Damped Turbine Blades, ASME paper GT2021-59272, Int. Gas Turbine & Aeroeng. Congress and Exh., virtual
DOI: https://doi.org/10.1115/GT2021-59272 -
(2020): Novel Piezoelectric Force Sensor Array for Investigation of Ultrasonic Wire Bonding, Electronic Components and Technology Conference (ECTC), Jun. 3-30, Orlando, USA, pp.276-283
DOI: 10.1109/ECTC32862.2020.00053 -
(2020): Identification of the essential features of the transient amplification of mistuned systems., Paper GT2020-15693, Proceedings of the ASME 2020 Turbo Expo Conference (2020); ASME Turbo Expo: Turbomachinery Technical Conference & Exhibition, London, UK, September 2020
DOI: https://doi.org/10.1115/GT2020-15693 -
(2020): Equivalent Linearization of Bladed Disk Assemblies with Friction Nonlinearities Under Random Excitation, ASME 2020 Turbo Expo
DOI: 10.1115/GT2020-14264 -
(2020): Single Nodal Diameter Excitation of Turbine Blades: Experimental and Theoretical Study, Paper GT2020-14282, Proceedings of the ASME 2020 Turbo Expo Conference (2020); ASME Turbo Expo: Turbomachinery Technical Conference & Exhibition, London, UK, September 2020
DOI: https://doi.org/10.1115/GT2020-14282
ISBN: 978-0-7918-8423-2 -
(2020): Modellierung der Schallabstrahlung des Turmes einer Windenergieanlage, Fortschritte der Akustik - DAGA 2020, 46. Jahrestagung für Akustik
ISBN: 978-3-939296-17-1 -
(2020): Aussagefähigkeit von Fehlstellenimitaten in der ZfP, Tagungsband DAGA 2020 - 46. Jahrestagung für Akustik | Datei |
ISBN: 978-3-939296-17-1 -
(2020): A Model Order Reduction Method for Bladed Disks with Large Geometric Mistuning using a Partially Reduced Intermediate System Model, Paper GT2020-14199, Proceedings of the ASME 2020 Turbo Expo Conference (2020); ASME Turbo Expo: Turbomachinery Technical Conference & Exhibition, London, UK, September 2020
-
(2019): Vibro-tactile displays for stimulating surface impressions, PROCEEDINGS of the 23rd International Congress on Acoustics 9 to 13 September 2019 in Aachen, Germany, pp. 1000-1007 | Datei |
ISBN: ISSN 2226-7808 and 2415-1599 ISBN 978-3-939296-15-7 -
(2019): Identifying objects in a 2D-space utilizing a novel combination of a re-radiation based method and of a difference-image-method, PROCEEDINGS of the 23rd International Congress on Acoustics 9 to 13 September 2019 in Aachen, Germany, pp. 8156-8163 | Datei |
ISBN: ISSN 2226-7808 and 2415-1599 ISBN 978-3-939296-15-7 -
(2019): Contact of viscoelastic siped tyre tread blocks on gravel road, Proceedings of the 7th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2019)
DOI: 10.7712/120117
ISBN: 978-618-82844-8-7 -
(2019): Effect of laser assistance in ultrasonic copper wire bonding, Lasers in Manufacturing
-
(2019): Probabilistic Study of Blend Repairs on an Axial Compressor Blisk using the Subset of Nominal Modes Method, Proc. IGTC Int. Gas Turbine Congress, Tokyo, 2019
-
(2018): Solid State Joint Actuator for a Vibro Tactile Line Display,ACTUATOR 2018; 16th International Conference on New Actuators, Bremen, Germany, 2018, pp. 1-4, VDE Verlag | Datei |
ISBN: 978-3-8007-4675-0 -
(2018): Investigation of the composite strength of hybrid steel-steel semi-finished products manufactured by laser beam welding and friction welding, 5TH INTERNATIONAL CONFERENCE of recent trends in structural materials (COMAT), 14.-16.11.2018, Pilsen
DOI: 10.1088/1757-899X/461/1/012049 -
(2018): Approximate Solution of the Fokker–Planck Equation for a Multidegree of Freedom Frictionally Damped Bladed Disk Under Random, ASME paper GT2018-75755, Int. Gas Turbine & Aeroeng. Congress and Exh., Oslo, 2018
-
(2018): Application of the Transfer Matrix Method for the Analysis of Lateral Vibrations of Drillstrings with Parameter Uncertainties , Model Validation and Uncertainty Quantification, Volume 3, Proceedings of the 36th IMAC, February 12-15, Orlando (FL), Society of Experimental Mechanics Series, Springer International Publishing, 2018
-
(2018): Rig and Engine Validation of the Nonlinear Forced Response Analysis Performed by the Tool OrAgL, ASME paper GT2018-75186, Int. Gas Turbine & Aeroeng. Congress and Exh., Oslo, 2018
-
(2018): Rotational Speed-Dependent Contact Formulation for Nonlinear Blade Dynamics Prediction, ASME paper GT2018-75290, Int. Gas Turbine & Aeroeng. Congress and Exh., Oslo, 2018
-
(2018): Influence of Geometric Design Parameters onto Vibratory Response and HCF Safety for Turbine Blades with Friction Damper, ASME paper GT2018-75363, Int. Gas Turbine & Aeroeng. Congress and Exh., Oslo, 2018
-
(2018): Numerical and Experimental Study of Shrouded Blade Dynamics Considering Variable Operating Points, ASME paper GT2018-76692, Int. Gas Turbine & Aeroeng. Congress and Exh., Oslo, 2018
-
(2018): Molecular dynamics simulation of microwelds formation and breakage during ultrasonic copper wire bonding, IEEE 68th Electronic Components and Technology Conference
DOI: 10.1109/ECTC.2018.00219 -
(2018): Investigations on Transient Amplitude Amplification by Applying Intentional Mistuning, ASME paper GT2018-75514, Int. Gas Turbine & Aeroeng. Congress and Exh., Oslo, 2018
-
(2018): Reduced-Order Modeling of Bladed Disks Considering Small Mistuning the Disk Sectors, Proceedings of the ASME Turbo Expo: Turbomachinery Technical Conference and Exposition, 2018
DOI: 10.1115/GT2018-76610 -
(2018): Intentional Response Reduction by Harmonic Mistuning of Bladed Disks with Aerodynamic Damping, ASME paper GT2018-76601, Int. Gas Turbine & Aeroeng. Congress and Exh., Oslo, 2018
-
(2017): Application of a Multi-Scale Hysteresis Friction Model to Aircraft Tires During Landing, Proceedings International Mechanical Engineering Congress & Exposition 2017, IMECE2017-71241
-
(2017): Modeling of ultrasonic processes utilizing a generic software framework, IOP Conference Series: Materials Science and Engineering, Vol. 211. No. 1, IOP Publishing, 2017
-
(2017): Application of a Fractional Viscoelastic Material Model to Rubber in Comparison to a Linear Approach, Proceedings ASME International Mechanical Engineering Congress & Exposition, IMECE2017-71380
-
(2017): Mikroaktorik für ein Taktiles Display, Proceedings of the MikroSystemTechnik Kongress 2017, October 23–25, 2017 München, S. 515-518
-
(2017): Nodal diameter-dependent modal damping method for nonlinear blade dynamics prediction considering variable rotational speed, Proceedings of ASME Turbo Expo 2017, 26-30 June, Charlotte, NC, USA
-
(2017): Modelling friction characteristics in turbine blade vibrations using a Fourier series expansion of a real friction hysteresis. , X International Conference on Structural Dynamics, EURODYN 2017, Rome, Italy, Procedia Engineering 199 (2017) 669–674, 2017
DOI: 10.1016/j.proeng.2017.09.586 -
(2017): Cultivator Optimization for Ultrasonic Friction Reduction using the Transfer Matrix Modeling Method, The International Workshop on Piezoelectric Materials and Applications in Actuators, Falls Church, VA, USA
-
(2017): Analysis of the Wire/Substrate Interface during Ultrasonic Bonding Process, IEEE CPMT Symposium Japan (ICSJ), Nov 20-22, 2017 Kyoto, Japan, S. 203-206
-
(2017): Visualization of Oxide Removal during Ultrasonic Wire Bonding Process, 19th IEEE Electronics Packaging Technology Conference (EPTC), Dec 6-9, 2017 Singapore, S. 1-4
-
(2017): Ermittlung mechanischer Kennwerte von Holzwerkstoffen mittels Modal-Updating, Proceedings der 35. CADFEM Simulation Conference, November 15-17, Koblenz, Deutschland
-
(2017): Determination of Mechanical Properties of Wood Based Materials using Modal Updating, Proceedings of the IEEE International Ultrasonics Symposium (IEEE IUS), September 6-9, Washingstion D.C., USA, 2017
-
(2017): Influence of beam position and ultrasonic amplitude on the microstructure of laser welded dissimilar steel-steel joints, International Congress on Applications of Lasers & Electro-Optics (ICALEO®), 22.-26.10.2017, Atlanta
-
(2017): Effect of laser assistance in ultrasonic copper wire bonding , Lasers in Manufacturing Conference 2017
-
(2017): Aerodynamical and Structural Analysis of Operationally Used Turbine Blades, In: Procedia CIRP 59, 77–82
DOI: 10.1016/j.procir.2016.09.023 -
(2017): Influence of Blade Repairs on Compressor Blisk Vibration considering Aerodynamic Damping and Mistuning, Proceedings of Shanghai 2017 Global Power and Propulsion Forum, GPPS-2017-0142
-
(2017): Reduced Order Modeling of Mistuned Bladed Disks Considering Aerodynamic Coupling and Mode Family Interaction, 12th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics (ETC12), Stockholm, April 3-7, 2017
-
(2017): Reduced Order Modeling of Mistuned Bladed Disks Under Rotation, 12th International Conference on Vibrations in Rotating Machines (SIRM 2017), Graz, Austria, February 15-17, 2017
-
(2016): A Study on the Influence of Design Parameters on the Power Output Characteristic of Piezoelectric Vibration Energy Harvester, Proceedings of the 27th International Conference on Noise and Vibration Engineering, ISMA, Leuven
-
(2016): Experimental and Theoretical Investigation of a Vibro-Impact Process Utilizing an in situ Capacitive Distance Measurement, Proceedings of ISMA2016 International Conference on Noise and Vibration Engineering, September 19-21, Leuven, Belgium
-
(2016): A Taylor Series Expansion Approach for Nonlinear Blade Forced Response Prediction Considering Variable Rotational Speed, Paper No. GT2016-56375, ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition, Seoul, South Korea, June 13–17, 2016
DOI: 10.1115/GT2016-56375 -
(2016): On the Interaction of Multiple Traveling Wave Modes in the Flutter Vibrations of Friction-Damped Tuned Bladed Disks, Paper No. GT2016-56126, ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition, Seoul, South Korea, June 13–17, 2016
DOI: 10.1115/GT2016-56126 -
(2016): Investigations on the Oxide Removal Mechanism during Ultrasonic Wedge-Wedge Bonding Process, IEEE 18th Electronics Packaging Technology Conference, November 30 - December 3, Singapore, Southeast Asia, pp. 405-410
-
(2016): A deeper understanding on the motion behaviors of wire during ultrasonic wedge-wedge bonding process, International Symposium on Microelectronics, October 10-13, Pasadena, USA, pp. 427-432
-
(2016): Zerstörungsfreie Delaminationserkennung mittels luftgekoppeltem Ultraschall, Tagungsband der 14. Vibrometerkonferenz der Polytec GmbH: Einsatz Optischer Schwingungsmesstechnik in Industrie und Forschung, November 22-23, Waldbronn, Germany
-
(2016): Delaminationserkennung in Holzwerkstoffen auf Basis der Ultraschalltransmissionsmessung, Tagungsband des 3. Workshop des Fachausschusses Ultraschall der DEGA e.V.: Messtechnische Anwendungen von Ultraschall, June 20-22, Drübeck, Germany
-
(2016): Experimental investigation of ultrasonic fluid mixing as assistance for a laser welding process, Proceedings of ISMA2016: International Conference on Noise and Vibration Engineering, September 19-21, Leuven, Belgium, pp. 1595-1603
-
(2016): Fast Multidisciplinary Design Optimization in the Development of Mechatronic Systems, Proceedings of ASME 2016 International Mechanical Engineering Congress and Exposition. November 11, Phoenix, USA
DOI: 10.1115/IMECE2016-65599 -
(2016): Numerical and experimental investigation of the levitation and flow created by ultrasonic fields in narrow gaps, 5th Micro and Nano Flows Conference
-
(2016): Performance of a Novel Small Component Conveyor Utilizing Flexural Travelling Waves, Conference Proceedings of ACTUATOR 2016, 15th International Conference on New Actuators, June 13-15, Bremen, Germany
-
(2016): Friction behaviour of surface textured elastomeric seals in pneumatic actuators, Proc. 23rd International Conference on Fluid Sealing, Manchester (UK)
-
(2015): Piezoelektrische Schwingungserzeuger zur Ermittlung der dynamischen Steifigkeiten von Elastomerbauteilen, VDI Mechatroniktagung, Dortmund
-
(2015): Investigations on the Mounting Position of Ultrasonic Transducers, The 12th International Workshop on Piezoelectric Materials and Applications in Actuators, Vilnius
-
(2015): Design of Low-Cost Flywheel Energy Storage Systems, CAMX, October 26-29, Dallas, USA
-
(2015): Skalierbarer Demonstrator für Mobile Schwungradspeichersysteme, VDI Mechatroniktagung, März 12-13, Dortmund, Deutschland
-
(2015): Design and Manufacturing of a Scalable Composite Flywheel Demonstrator for Mobile Energy Storage System, CANCOM, August 17-20, Edmonton, Canada
-
(2015): Model and Method for a Time-Efficient Analysis of Lateral Drillstring Dynamics, Proceedings of ASME Turbo Expo 2015: Turbine Technical Conference and Exposition, June 15-19, Montréal, Canada
-
(2015): A Method to Reduce the Energy Localization in Mistuned Bladed Disks by Application-Specific Blade Pattern Arrangement, ASME Turbo Expo 2015: Turbine Technical Conference and Exposition, June 15-19, Montréal, Canada
-
(2015): Real-time observation of interface relative motion during ultrasonic wedge-wedge bonding process, In International Symposium on Microelectronics, IMAPS (International Microelectronics, Assembly and Packaging Society), pp. 419-424
-
(2015): Better Learning Success in Engineering Mechanics, Proc. of the ASME 2015 International Mechanical Engineering Congress & Exposition, IMECE2015, Houston, Texas (USA)
-
(2015): Resonance Frequency Tuning of Piezoelectric Ultrasonic Transducers Using Resonant Switching Converters, Third International Academic Conference of Postgraduates, NUAA, Nanjing, China
-
(2015): Kleinteileförderung mit einem ultraschallbasierten Wanderwellentransportsystem, Tagungsband Mechatronik 2015
ISBN: 978-3-00-048814-6 -
(2015): Adjoint Optimization of an Internal Cooling Channel U-Bend, Paper No. GT2015-43423, ASME Turbo Expo 2015: Turbine Technical Conference and Exposition, Montreal, Quebec, Canada, June 15-19, 2015
DOI: 10.1115/GT2015-43423 -
(2014): Drillstring Dynamics: Real-Time Calculation of Safe Operating Regions in Inclined Boreholes Using the Shooting Method, 8th European Nonlinear Oscillations Conference (ENOC), July 6-11, Vienna, Austria
-
(2014): Introduction and Evaluation of a Frequency Domain Method for Damping Determination, MSM Conference 2014, Opole, Poland
-
(2014): Influential Parameters on Structural Damping Values of Turbine Blades, Paper No. GT2014-25656, ASME Turbo Expo 2014: Turbomachinery Technical Conference and Exposition, Düsseldorf, Germany, June 16-20, 2014
DOI: 10.1115/GT2014-25656 -
(2014): Comparison of two Widely-Used Frequency-Time Domain Contact Models for the Vibration Simulation of Shrouded Turbine Blades, Paper No. GT2014-26226, ASME Turbo Expo 2014: Turbomachinery Technical Conference and Exposition, Düsseldorf, Germany, June 16-20, 2014
DOI: 10.1115/GT2014-26226 -
(2014): Nonlinear modes and model reduction of structures with contact interfaces. Vortrag in panel session zu, Efficient Dynamic Analysis of Nonlinear Structures”, ASME Turbo Expo, Düsseldorf, Germany
-
(2014): A multi-scale approach for estimation of real contact area and frictional behavior of rubber sliding on rough surfaces, Proceedings of the 11th World Congress on Computational Mechanics, July 20-25, Barcelona, Spain
-
(2014): Prediction of contact area and frictional behaviour of rubber on rigid rough surfaces, Proc. of the ASME 2014 International Mechanical Engineering Congress & Exposition, IMECE2014, Montréal, Québec, Canada
-
(2014): Optimized Usage of Piezoelectric Material for Shunt Damping Techniques, Forum Acusticum, Krakow, Poland
-
(2014): An adaptive Tuned Mass Damper Using Friction Bars, MSM Conference 2014, Opole, Poland
-
(2014): Dynamic Behavior of a Mistuned Air Turbine: Comparison Between Simulations and Measurements, Paper No. GT2014-26025, ASME Turbo Expo 2014: Turbomachinery Technical Conference and Exposition, Düsseldorf, Germany, June 16-20, 2014
DOI: 10.1115/GT2014-26025 -
(2014): Laser Scanning Unit for Light Symbol Projection, Vision 2014 -Vehicle and Infrastructure Safety Improvement in Adverse Conditions and Night Driving, SIA Proceedings; Versailles, France
-
(2014): Dynamics of Bladed Disks with Frictional Coupling and Alternate Mistuning Pattern, Paper No. IMECE2014-38263, Proceedings of the ASME 2014 International Mechanical Engineering Congress and Exposition (IMECE), November 14-20, 2014, Montreal, Canada
DOI: 10.1115/IMECE2014-38263 -
(2014): Directional Evaluation of Surface Topography Parameters and Dry Friction, Proc. of the ASME 2014 International Mechanical Engineering Congress & Exposition, IMECE2014, Montréal, Québec (Canada)
-
(2014): Application of the Asymptotic-Numerical Method for the Analysis of Lateral Drillstring Vibrations, European Nonlinear Oscillations Conference (ENOC), July 6-11, Vienna, Austria
-
(2014): Modeling of the Interaction of Lateral and Torsional Vibrations in Oilwell Drillstring Vibrations, International Petroleum Technology Conference (IPTC), January 20-22, Doha, Quatar
-
(2013): Regeneration-Induced Forced Response in Axial Turbines, Paper No. GT2013-95431, ASME Turbo Expo 2013: Turbomachinery Technical Conference and Exposition, San Antonio, Texas, June 3-6, 2013
DOI: 10.1115/GT2013-95431 -
(2013): The T-Ring Principle: A Sophisticated Approach of Sealing Dynamically, Proc. World Tribology Congress 2013, Torino, Italy, 8-13 September
-
(2013): Amplitude-Dependent Vibration Behavior of Superelastic Shape Memory Oscillators, 11th International Conference on Vibration Problems (ICOVP-2013)
-
(2013): Stress Distribution and Durability of Pre-Stressed Piezoelectric Multilayer Actuators, 10th International Workshop on Piezoelectric Materials and Applications, Hannover, Germany
-
(2013): Reduced Order Modeling Based on Complex Nonlinear Modal Analysis and its Application to Bladed Disks With Shroud Contact, Paper No. GT2013-94560, ASME Turbo Expo 2013: Turbomachinery Technical Conference and Exposition, San Antonio, Texas, June 3-6, 2013
DOI: 10.1115/GT2013-94560 -
(2013): Analysis and Robust Design of Friction Joints for Vibration Reduction in Bladed Disks, SIRM 2013- 10th International Conference on Vibrations in Rotating Machines, Berlin, February 25 - 27, 2013
-
(2013): An Adaptive Tuned Mass Damper Using Friction Bars, ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS), Salt Lake City, USA
-
(2013): Tuned Mass Damper with Piezoelectrically Tunable Damping, 20th Int. Congress on Sound and Vibration (ICSV), Bangkok, Thailand
-
(2013): Energy Harvesting Patents 2012, Proceedings of 10th International Workshop on Piezoelectric Materials and Applications and 8th Energy Harvesting Workshop, Hannover, Germany
-
(2013): Bond Quality Investigation of Ultrasonic Assisted Composite Casting, Proceedings of 10th International Workshop on Piezoelectric Materials and Applications and 8th Energy Harvesting Workshop, July 14-17, Hannover, Germany
ISBN: 978-3-944586-10-6 -
(2013): Ultrasonic Assisted Simultaneous Composite Casting – a Feasibility Study, Ultrasonics Symposium (IUS), 2012 IEEE International-Proceedings
-
(2013): Investigation of Alternate Mistuned Turbine Blades Non-Linear Coupled by Underplatform Dampers, Paper No. GT2013-95681, ASME Turbo Expo 2013: Turbomachinery Technical Conference and Exposition, San Antonio, Texas, June 3-6, 2013
DOI: 10.1115/GT2013-95681 -
(2013): Soundfield Design for Ultrasonically Assisted Composite Casting, Proceedings of 11th International Conference on Vibration Problems
-
(2013): Model based surface topography design of pneumatic applications for improved friction properties, Proc. 22nd International Conference on Fluid Sealing, Düsseldorf
-
(2013): A Transfer Matrix Method for the Design of Resonant Piezoelectric Devices, 10th International Workshop on Piezoelectric Materials and Applications, Hannover, Germany
-
(2013): Friction Model for the Counter Surface Design of Pneumatic Cylinder Seals, Proceedings World Tribology Congress, Turin, Italy
-
(2012): Transient Resonance Passage with Respect to Friction, Paper No. GT2012-68986, ASME Turbo Expo 2012: Turbomachinery Technical Conference and Exposition, Copenhagen, Denmark, June 11-15, 2012
DOI: 10.1115/GT2012-68986 -
(2012): Investigation on the Amplitude-Dependent Damping Behavior of Superelastic Shape Memory Alloys, Proc. of the ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS12. Stone Mountain, USA, 19-21 September
-
(2012): Active and passive vibration control of ultrasonic bonding transducers, Actuator Conference, Bremen
-
(2012): Autoresonant Control of an Electromagnetic Linear Actuator with Piecewise-Linear Restoring Force, 13th Mechatronics Forum International Conference, Linz, Austria
-
(2012): High speed shape memory alloy activation, ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Stone Mountain, USA
-
(2012): Multiharmonic Analysis and Design of Shroud Friction Joints of Bladed Disks Subject to Microslip, Paper No. DETC/CIE2012-70184, Proceedings of ASME 2012 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE, Chicago, USA, August 12-15, 2012
DOI: 10.1115/DETC2012-70184 -
(2012): Robust Design of Friction Interfaces of Bladed Disks with Respect to Parameter Uncertainties, Paper No. GT2012-68578, ASME Turbo Expo 2012: Turbomachinery Technical Conference and Exposition, Copenhagen, Denmark, June 11-15, 2012
DOI: 10.1115/GT2012-68578 -
(2012): Driving methods and control design for high power ultrasonic transducers, 9th International Workshop on Piezoelectric Materials and Applications in Actuators, Hirosaki, Japan
-
(2012): Online Parameter Identification for Piezoelectric Ultrasonic Transducer at High Vibration Amplitudes, 15th International Conference on Experimental Mechanics, Porto, Portugal
-
(2012): Piezoelectric Energy Harvesting: An Overview, Proceedings Mechanical Engineering Conference on Sustainable Research and Innovation, Vol 4
ISBN: ISSN: 2079-6226 -
(2012): Optimization of bond transducer vibrations using active and semi-active control, Active and Passive Smart Structures and Integrated Systems 2012. Edited by Sodano, Henry A. Proceedings of the SPIE, Volume 8341, pp. 83412L-83412L-8
DOI: 10.1117/12.914789 -
(2012): Energy Flow and Dissipation of Synchronized Switch Damping with Piezoceramics Using Negative Capacitance, Int. Conference Mechatronic Systems and Materials (MSM), Bialystok, Polen
-
(2012): Approaches for the Validation of Analytical Models for the Simulation of Siped Tire Tread Blocks, World Congress on Computational Mechanics, Sao Paulo, Brasil
-
(2012): Modeling Contact Dynamics of Vanes with Adjustable Upstream Flow Angles, Paper No. GT2012-68185, ASME Turbo Expo 2012: Turbomachinery Technical Conference and Exposition, Copenhagen, Denmark, June 11-15, 2012
DOI: 10.1115/GT2012-68185 -
(2012): Optimization of a passive piezoelectric damper for a viscously damped main system, Active and Passive Smart Structures and Integrated Systems 2012. Edited by Sodano, Henry A. Proceedings of the SPIE, Volume 8341, pp. 834107-834107-10
DOI: 10.1117/12.915163 -
(2012): On Blade Damping Technology Using Passive Piezo Dampers, Paper No. GT2012-68600, ASME Turbo Expo 2012: Turbomachinery Technical Conference and Exposition, Copenhagen, Denmark, June 11-15, 2012
DOI: 10.1115/GT2012-68600 -
(2012): Alternate Mistuning of Turbine Bladings Coupled by Underplatform Dampers, Paper No. IDETC/CIE2012-70863, Proceedings of ASME 2012 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE, Chicago, USA, August 12-15, 2012
DOI: 10.1115/DETC2012-70863 -
(2012): The Effect of Counter Surface Topography on the Friction of Seals, 17th International Sealing Conference, Stuttgart, Germany
-
(2012): Modeling of a Vibration-based Piezomagnetoelastic Energy Harvesting System by Using the Duffing Equation, ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS), Stone Mountain
-
(2012): Modeling of a nonlinear vibration-based energy harvesting system as a duffing oscillator, Int. Conference Mechatronic Systems and Materials (MSM), Bialystok, Polen
-
(2012): Simulation-based Surface Modification for Reduction of Rubber Friction in Sealing Contacts of Pneumatic Cylinders, Proceedings of the 26th International Conference on Surface Modification Technologies, pp. 229-237, Lyon (France)
-
(2012): Beam model for tyre tread block dynamics International Journal of Vehicle Noise and Vibration, Special issue: Noise, Vibration and Reliability in Vehicle Systems Vol.9, Issue 3-4
DOI: 10.1504/IJVNV.2013.055812
ISBN: ISSN (online): 1479-148X; ISSN (print): 1479-1471 -
(2011): A Review: The control strategies of synchronized switching damping technique, IEEE Int. Conference on Mechatronics and Automation, Peking, China, pp.1657-1663
DOI: 10.1109/ICMA.2011.5986372
ISBN: ISSN (online): 2152-744X, ISSN (print): 2152-7431 -
(2011): The Influence of Blade Properties on the Forced Response of Mistuned Bladed Disks, Paper No. GT2011-46826, ASME Turbo Expo 2011: Turbomachinery Technical Conference and Exposition, Vancouver, Canada, June 6-10, 2011
DOI: 10.1115/GT2011-46826 -
(2011): Eddy Current Damper for Turbine Blading: Electromagnetic Finite Element Analysis and Measurement Results, Paper No. GT2011-45242, ASME Turbo Expo 2011: Turbomachinery Technical Conference and Exposition, Vancouver, Canada, June 6-10, 2011
DOI: 10.1115/GT2011-45242 -
(2011): On the maximum damping performance of piezoelectric switching techniques, Conference on Smart Materials, ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS), Scottsdale, USA
-
(2011): Determination of the piezoelectric coupling coefficient for arbitrary deformation, Int. Conference Mechatronic Systems and Materials (MSM), Kaunas, Lithuania
-
(2011): Optimized geometry of bimorphs for piezoelectric shunt damping and energy harvesting, Int. Conference of Engineering Against Fracture (ICEAF), Mykonos, Greece
-
(2011): Modeling the dynamic behavior of a piezomagnetoelastic energy harvesting system, European Nonlinear Dynamics Conference (ENOC), Rom, Italy
-
(2011): Model-Based Stability Analysis of Torsional Drillstring Oscillations, IEEE International Conference on Control Applications (CCA) Part of 2011, IEEE Multi-Conference on Systems and Control, Denver, CO, USA, 28-30 September
-
(2011): Unilateral Impact and Contact of Elastic Structures Using Lagrangian Multipliers, Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, 11-17 November, Denver, USA (IMECE2011-63790)
-
(2009): A Substructure Based Reduced Order Model for Mistuned Bladed Disks, Paper No. DETC2009-87459, Proceedings of ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2009), San Diego, USA, August 30-September 2, 2009
DOI: 10.1115/DETC2009-87459 -
(2009): Eddy Current Damping: A Concept Study for Steam Turbine Blading, Paper No. GT2009-59593, ASME Turbo Expo 2009: Turbomachinery Technical Conference and Exposition, Orlando, Florida, June 8-12, 2009
DOI: 10.1115/GT2009-59593 -
(2009): Design of a new high-performance test rig for hydraulic seals, 20th International Conference on Fluid Sealing, S. 101-107, Bedfordshire
ISBN: 978 1 85598 113 3 -
(2009): Nonlinear Multiharmonic Vibrations of Coupled Turbine Bladings, SIRM 2009 - 8th International Conference on Vibrations in Rotating Machines, Vienna, February 23 - 25, 2009
-
(2009): Multiharmonic Forced Response Analysis of a Turbine Blading Coupled by Nonlinear Contact Forces, Paper No. GT2009-59201, ASME Turbo Expo 2009: Turbomachinery Technical Conference and Exposition, Orlando, Florida, June 8-12, 2009
DOI: 10.1115/GT2009-59201 -
(2009): Application of LCP contact formulation on mechanical systems with nonrigid coupled unilateral contact points illustrated with a simple model of a windscreen wiper, Proceedings of the ASME 2009 International Mechanical Engineering Congress & Exposition IMECE2009, Lake Buena Vista, Florida, USA
-
(2009): Temperature investigations in tire/road contact, Proceedings of the ASME 2009 International Mechanical Engineering & Exposition, IMECE2009-11165 (Transportation Systems), Lake Buena Vista, Florida, USA, pp. 1-10
ISBN: 978-0-7918-3863-1 -
(2008): Nonlinear Vibration Analysis of Gas Turbine Bladings with Shroud Coupling, Paper No. GT2008-50787, ASME Turbo Expo 2008: Turbomachinery Technical Conference and Exposition, Berlin, Germany, June 9-13, 2008
DOI: 10.1115/GT2008-50787 -
(2008): Numerical and Experimental Damping Prediction of a Nonlinearly Coupled Low Pressure Steam Turbine Blading, Paper No. GT2008-51073, ASME Turbo Expo 2008: Turbomachinery Technical Conference and Exposition, Berlin, Germany, June 9-13, 2008
DOI: 10.1115/GT2008-51073 -
(2008): Friction Phenomena on Microscale in Technical Contacts with Rubber, In: Proceedings of the 9th Biennial ASME Conference on Engineering Systems Design Analysis (ESDA), Haifa (Israel), S. 1-7
-
(2007): Modeling and Simulation of the Process Machine Interaction During Tool Grinding Processes, Proceedings of the 10th CIRP International Workshop on Modeling of Machining Operations, Reggio Calabria, Italy, August 27-28, 2007
-
(2006): The Estimation of the Contact Stiffness for Directly and Indirectly Coupled Turbine Blading, Paper No. GT2006-90473, ASME Turbo Expo 2006: Turbomachinery Technical Conference and Exposition, Barcelona, Spain, May 8-11, 2006
DOI: 10.1115/GT2006-90473 -
(2004): Systematic Mistuning of Bladed Disk Assemblies With Friction Contacts, Paper No. GT2004-53310, ASME Turbo Expo 2004: Turbomachinery Technical Conference and Exposition, Vienna, Austria, June 14-17, 2004
DOI: 10.1115/GT2004-53310 -
(2004): Asymmetrical Underplatform Dampers in Gas Turbine Bladings: Theory and Application, Paper No. GT2004-53316, ASME Turbo Expo 2004: Turbomachinery Technical Conference and Exposition, Vienna, Austria, June 14-17, 2004
DOI: 10.1115/GT2004-53316 -
(2003): Schwingungsverhalten von verstimmten Beschaufelungen mit Reibelementen, SIRM 2003 - Schwingungen in rotierenden Maschinen 6, Darmstadt, February 26-28, 2003
-
(2002): Optimization of the Contact Geometry between Turbine Blades and Underplatform Dampers with Respect to Friction Damping, Paper No. GT-2002-30429, ASME Turbo Expo 2002: Turbomachinery Technical Conference and Exposition, Amsterdam, The Netherlands, June 3-6, 2002
DOI: 10.1115/GT2002-30429 -
(2002): Fast Calculation of the Statistics of the Forced Response of Mistuned Bladed Disk Assemblies with Friction Contacts, Paper No. GT-2002-30427, ASME Turbo Expo 2002: Turbomachinery Technical Conference and Exposition, Amsterdam, The Netherlands, June 3-6, 2002
DOI: 10.1115/GT2002-30427 -
(2000): Optimization of Interblade Friction Damper Design, Paper No. 2000-GT-0541, ASME Turbo Expo 2000: Turbomachinery Technical Conference and Exposition, Munich, Germany, May 8-11, 2000
DOI: 10.1115/2000-GT-0541
Bücher
-
(2021): Thermo-mechanische Modellierung von Flugzeugreifen für transiente Manöver, TEWISS Verlag
ISBN: 978-3-95900-526-5 -
(2012): Untersuchungen zu Reibmechanismen an Pneumatikdichtungen, PZH-Verlag, Garbsen
ISBN: 978-3-943104-63-9 -
(2010): Ground Vehicle Dynamics, Springer-Verlag Berlin
DOI: 10.1007/978-3-540-68553-1
ISBN: 978-3-540-24038-9 -
(2005): Auslegung von Reibelementen zur Schwingungsdämpfung von Turbinenschaufeln, Diss., Düsseldorf: VDI-Fortschrittberichte Reihe 11, Nr. 328
Beiträge in Büchern
-
(2023): A Combined Numerical-Experimental Approach for the Damping Evaluation of Non-Linear Dissipative Vibration Systems, Eberhard, P. (ed.).: Lecture Notes in Applied and Computational Mechanics, Volume 102: Calm, Smooth and Smart. Novel Approaches for Influencing Vibrations by Means of Deliberately Introduced Dissipation, pp. 285-303
DOI: 10.1007/978-3-031-36143-2 -
(2012): Modeling Aspects of Nonlinear Energy Harvesting for Increased Bandwidth, Small-Scale Energy Harvesting, Edited by M. Lallert, InTech, Chapter 13
DOI: 10.5772/52232
ISBN: 978-953-51-0826-9 -
(2011): Electromechanical models for energy harvesting systems, Energy Harvesting with Piezoelectric and Pyroelectric Materials, pp. 39-56, chapter 2
ISBN: 978-0-87849-159-9 -
(2009): Piezoelectric Equivalent Circuit Models, In: Priya, S.; Inman, D. J. (Hrsg.): Energy Harvesting Technologies, pp. 107-128
DOI: 10.1007/978-0-387-76464-1_4
ISBN: 978-0-387-76463-4 -
(2007): Anforderungen an energie-autarke Systeme, mögliche Anwendungsfelder und aktuelle Untersuchungen, Wallaschek, Jörg (Hrsg.) Energy Harvesting. Grundlagen und Praxis energieautarker Systeme, S. 103-115, Expert Verlag
ISBN: 978-3-8169-2789-1
Vortrag
-
(2022): Weiche Robotersysteme: Chancen und Herausforderungen, VDI Mechatroniktagung 2022
-
(2022): Dynamic modeling of a soft pneumatic acutator, 8th European Congress on Computational Methods in Applied Sciences and Engineering ECCOMAS Congress 2022
-
(2020): DEVELOPMENT OF A FINITE ELEMENT MODEL FOR SIMULATION OF A SOFT ROBOT ACTUATOR WITH EXTERNAL LOADS, 4th World Congress on Computational Mechanics (WCCM)
-
(2018): Convenient Choice of Friction Test Parameters for Simulation of Turbine Blade Contacts, Blade Mechanics Seminar, Winterthur, CH
-
(2016): A feasibility study on the use of ultrasound for inactivating E. Coli in raw and treated wastewater, 2nd International Conference on Ultrasonic-based Applications: from analysis to synthesis - Ultrasonics 2016
Konferenz
-
(2022): Optimal Sensor Placement and Model Updating of Axial Compressor Casing Components, Proceedings of IMAC-XL (40th) 2022: A Conference and Exposition on Structural Dynamics, Feb. 7-10, Orlando, Florida
-
(2020): Traveling wave effects in structures with local viscous and friction damping, International Conference on Noise and Vibration Engineering (ISMA), Leuven, Belgium, September 7-9, 2020
-
(2020): Forced Response of Nonlinear Systems Under Combined Harmonic and Random Excitation, Kerschen, Brake et al. (Hg.) 2020 – Nonlinear Structures and Systems
DOI: 10.1007/978-3-030-12391-8_7 -
(2020): Modal Excitation of Circular Rotating Structures Using an Innovative Electromagnetic Device, Mains M., Dilworth B. (eds) Topics in Modal Analysis & Testing, Volume 8. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, Cham
DOI: 10.1007/978-3-030-12684-1_15
ISBN: 978-3-030-12684-1 -
(2020): Hybrid nonlinear phase resonance testing utilizing realtime substructuring and control based continuation, International Conference on Noise and Vibration Engineering (ISMA), Leuven, Belgium, September 7-9, 2020
-
(2020): Numerical investigations of the energy transfer between modes due to multi-resonances of a nonlinear friction-damped model, International Conference on Noise and Vibration Engineering (ISMA), Leuven, Belgium, September 7-9, 2020
-
(2019): Forced Response of Nonlinear Systems Under Combined Harmonic and Random Excitation, Kerschen, Brake et al. (Hg.) 2020 – Nonlinear Structures and Systems
DOI: 10.1007/978-3-030-12391-8_7 -
(2019): Potenzialstudie eines Verbunds aus entkoppelt betriebenen Aeroderivaten, Beitrag in: Hurtado, A.; Beckmann, M.; (Hrsg.): Kraftwerkstechnik 2019, SAXONIA
ISBN: 3934409938 -
(2019): A Priori Interface Reduction for Substructuring of Multistage Bladed Disks, Dynamic Substructures, Volume 4, Proceedings of the 37th IMAC, a Conference and Exposition on Structural Dynamics 2019, Springer, 13–21
ISBN: 3030121844 -
(2017): Ein neuer Laborprüfstand zur Bewertung von einzelnen Reifenprofil- klötzen, 16. Internationale VDI-Tagung Reifen-Fahrwerk-Fahrbahn 2017, S. 257–270
-
(2017): Beeinflussung des Schmelzbades von Mischverbindungen im Laserstrahl-schweißprozess durch Ultraschall, Fortschrittsberichte der Materialforschung und Werkstofftechnik / Bulletin of Materials Research and Engineering, Band 4, Tagungsband 2. Niedersächsisches Symposium Materialtechnik 23. bis 24. Februar 2017. Shaker, Aachen S. 259-268
-
(2015): Mistuning of Blisks During Milling Process - Manufacturing and Repair, Deutsche Gesellschaft für Luft- und Raumfahrt (Hg.): 64. Deutscher Luft- und Raumfahrtkongress (DLRK), Rostock, Germany, September 22-24, 2015
-
(2015): Forced response of turbine bladings with alternating mistuning and friction damper coupling, EUROMECH Colloquium 573 Coupling and Nonlinear interactions in Rotating Machinery, Lyon, France, August 25-26, 2015
-
(2015): Mistuned Bladed Disks with Aeroelastic Coupling, 20th Blade Mechanics Seminar, Winterthur, Switzerland, September 8, 2015
-
(2014): Introduction and Evaluation of an Experimental Setup for Material Damping Determination, Proc. Of ISROMAC-15, The 15th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, February 24 - 28, 2014
-
(2014): A Framework for the Computational Dynamic Analysis of Coupled Structures Using Nonlinear Modes, In: Kerschen G. (eds) Nonlinear Dynamics, Volume 2: Proceedings of the 32nd IMAC, A Conference and Exposition on Structural Dynamics, Orlando, Florida, USA, February 3-5, 2014
DOI: 10.1007/978-3-319-04522-1_5 -
(2014): Modal analysis of nonlinear dissipative systems: Application to vibration damping with shape memory materials, Proceedings of the 15th Conference on Nonlinear Vibrations, Localization and Energy Transfer, Istanbul, Turkey, July 2-4, 2014
-
(2014): Vibration analysis of structures with contact interfaces using nonlinear modes, Proceedings of the 11th World Congress on Computational Mechanics, July 20-25, Barcelona, Spain, 2014
-
(2013): Resonance Passage of Structures with Friction Contacts, Paper ID 345-993, 4th Canadian Conference on Nonlinear Solid Mechanics (CanCNSM), Montreal, Canada, July 23-26, 2013
-
(2013): Resonance Passage of Cyclic Symmetric Structures, International Conference on Vibration Problems (ICOVP-2013), Lissabon, Portugal, September 9-12, 2013
-
(2013): A Method of Modal Analysis and Synthesis for Mechanical Systems with Piecewise-Smooth Nonlinearities, Paper 682, 4th Canadian Conference on Nonlinear Solid Mechanics (CanCNSM), Montreal, Canada, July 23-26, 2013
-
(2013): Vibration Analysis of Shrouded Turbine Blades for a 30 MW Gas Turbine, Paper No. TBTS2013-2014, ASME 2013 Turbine Blade Tip Technical Symposium and Course Week (TBTS2013), Hamburg, Germany, September 30–October 3, 2013
DOI: 10.1115/TBTS2013-2014 -
(2012): Aeroakustik & Aeroelastik der Strömungsmaschinen - Eine Vorlesung als Reaktion auf aktuelle Herausforderungen in der Turbomaschinenentwicklung, DAGA 2012, 38. Jahrestagung für Akustik, Darmstadt, March 19-22, 2012
-
(2012): Experimental Analysis of an Eddy Current Damping Devce Applied to a Rotating Integrally Bladed Disk, Proc. Of ISROMAC-14 The 14th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, February 27 - March 2, 2012
-
(2012): Reduced Order Model of Mistuned Bladed Disks Using the Krylov-Subspace Combined with the Craig-Bampton Reduction Technique, Paper No. 18187, Proceedings of the 10th World Congress on Computational Mechanics, Sao Paulo, Brazil, July 8-13, 2012
DOI: 10.5151/meceng-wccm2012-18187 -
(2012): Nonlinear harmonic analysis of structures containing joints with impacts and friction, Paper No. 18336, Proceedings of the 10th World Congress on Computational Mechanics, Sao Paulo, Brazil, July 8-13, 2012
DOI: 10.5151/meceng-wccm2012-18336 -
(2012): The Effect of Counter Surface Topography on the Friction of Seals, Proceedings of the 17th International Sealing Conference, pp. 663-673, Stuttgart
-
(2011): Simulation of the friction of rubber compounds on real road surfaces, Proceedings 2nd International Conference on Computational Contact Mechanics, Hannover
-
(2011): Analysis of the Frequency Response of Mistuned Multi-Stage Bladed Disks, Paper No. 11-4, ICEAF II, 2nd International Conference of Engineering against Fracture, Mykonos, Greece, June 22-24, 2011
-
(2010): Variation of counter surface parameters and their tribological input on pneumatic actuators, ISC, Internationale Dichtungstagung, 16. Frankfurt am Main : VDMA Fluidtechnik, S. 209-220
-
(2010): Tribological Impact of Surface Modifications to Frictional Counterparts in Contact with TPU Compounds, Proceedings of the 7th International Fluid Power Conference Aachen, S. 287-300
-
(2010): Damping of cyclic bladed disks utilizing a piezoelectric switching technique , 10th Int. Conference on Motion and Vibration Control (MOVIC), Tokyo, Japan
-
(2010): Analysis of the Influence of Blade Pattern Characteristics on the Forced Response of Mistuned Blisks with a Cyclic CMS-Based Substructure Model, Paper No. ESDA2010-25294, Proceedings of the ASME 2010 10th Biennial Conference on Engineering Systems and Design Analysis (ESDA 2010), Istanbul, Turkey, July 12-14, 2010
DOI: 10.1115/ESDA2010-25294 -
(2010): Development of a shape memory alloy based grasping mechanism for an automated insertion tool for cochlear implants , Proc. 12th Int. Conf. on New Actuators, pages 889–891
-
(2010): Advanced Optimization Strategies for Cost-Sensitive Design of Energy Storage Flywheel Rotors , In: Proceedings of the Society for the Advancement of Materials and Process Engineering, Seattle
-
(2010): Model-Based Piezoelectric Self-Sensing Technique , 10th Biennial Conference on Engineering Systems Design and Analysis (ESDA), Istanbul, Turkey
-
(2010): Active and semi-active vibration control of ultrasonic bonding transducers , IMAPS and SEMI Workshop on Wire Bonding, San Francisco, USA
-
(2010): Efficient Modeling of the Damping Performance of Piezoelectric Switching Techniques using Harmonic Balance Method , 10th Int. Conference on Motion and Vibration Control (MOVIC), Tokyo, Japan
-
(2010): Vibration Damping with Shunted Piezoceramics: Fundamendals and Technical Applications, 6th Int. Conference Mechatronic Systems and Materials (MSM), Opole, Poland
-
(2010): Optimizing switching algorithm of synchronized switch damping for multimodal excitation , SPIE Conference Smart structures and materials, San Diego
-
(2010): Automated measurement system for mechanical characterization of soft tissues and phantoms, Electronic Devices, Systems and Applications (ICEDSA), 2010 International Conference, pp. 227-231, 11-14 April
DOI: 10.1109/ICEDSA.2010.5503068 -
(2009): Sprag-Slip Simulation with a Modular Wiper Model, Proceedings of the 7th EUROMECH Solid Mechanics Conference, S. 293-294, Lisbon, Portugal
-
(2009): Modelling of Shunted Piezoceramic Actuators with Substructure Techniques and Application to a Bladed Disk Model, IEEE/ASME International Conference on Advanced Intelligent Mechatronics, Singapore, July 14-17, 2009
-
(2009): Active and Semiactive Vibration Damping of Turbine Blades with Piezoceramics, Proc. SPIE Smart Structures/NDE 2009, San Diego, March 8-12, 2009
-
(2009): Tread block mechanics on ice and snow surfaces studied with a new high speed linear friction test rig, 12. Int. Congress Reifen-Fahrwerk Fahrbahn, VDI-Berichte Nr. 2086, S. 239-254, Hannover
ISBN: 978-3-18-092086-3 -
(2009): Simulation of a siped tire tread block by Euler-Bernoulli beams, PAMM-Proc., Vol. 9, Applied Analysis, S.531-532
-
(2008): Unidirectional Coupled Aerodynamic and Structural Mechanic Analysis of a Turbine Blading, Proc. of IMechE 9th Int. Conf. on Vibrations in Rotating Machinery, Exeter, S. 171-184
-
(2008): The Nonlinear Analysis of the Multiharmonic Forced Response of Coupled Turbine Blading, Proc. Of ISROMAC-12, The 12th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, February 27th - March 2, 2012
-
(2008): Friction behaviour of grease lubricated seals, ISC: International Sealing Conference, 15. Frankfurt am Main: VDMA Fluidtechnik, pp. 281-291
-
(2008): Avoidance of friction induced vibrations on seals, PAMM - Proceedings in Applied Mathematics and Mechanics, Bremen, Germany
-
(2007): Surface treatment of elastomers to improve the tribological properties against metal counterbodies, Proceeding ECOTRIB 2007, (Ljulbljana, Slovenia)
ISBN: 978-961-902-548-2 -
(2007): Schwingungsverhalten elastischer Körper mit nichtlinearen Kopplungen in ausgedehnten Reibkontakten, VDI-Tagung Nichtlineare Schwingungen - Reibung und Kontaktmechanik (VDI-Berichte 2022), Kassel, Germany, November 13-14, 2007
-
(2007): Experimentelle Untersuchungen von Stick-Slip Schwingungen an Scheibenwischern, GAMM, Zürich
-
(2007): Musterdatenbank zur Konzipierung verlässlicher mechatronischer Systeme, In: TTZ2007 - 23. Tagung Technische Zuverlässigkeit. Entwicklung und Betrieb zuverlässiger Produkte, Düsseldorf: VDI-Verlag, S. 135-146
-
(2007): Schwingungsdämpfung durch Reibung: Theorie, Experiment, Anwendungen, VDI-Tagung Schwingungsdämpfung (VDI-Berichte 2003), Wiesloch, October 16-17, 2007
-
(2007): Passive Damping of Spacecraft Sandwich Panels, 10th European Conference on Spacecraft Structures, Materials & Mechanical Testing, Berlin, September 10-13, 2007
-
(2007): Vermeidung von reibungsselbsterregten Schwingungen an Systemen mit Dichtungen durch Oberflächenbeschichtungen, Tagungsband VDI-Tagung: Nichtlineare Schwingungen, VDI-Berichte 2022, Kassel
ISBN: 978-3-18-092022-1 -
(2006): Model Based Design of Piezoelectric Generators Utilising Geometrical and Material Properties
-
(2006): Dynamic Behaviour of Elastic Bodies Coupled by Extended Friction Contacts, Proc. of the 12th International Conference on Noise and Vibration Engineering (ISMA), Leuven, Belgiuem, September 18-20, 2006
-
(2006): An Experimentally Validated Model for Unsteady Rolling , Proceedings European Conference on Computational Mechanics ; 3 (Lisbon, Portugal)
ISBN: 1-402-04994-3 -
(2006): Modeling of Assembled Combustion Engine Parts under Consideration of Micro Slip Effects in the Connection Flanges, Proc. of the 12th International Conference on Noise and Vibration Engineering (ISMA), Leuven, Belgium, September 18-20, 2006
-
(2005): Temperatureffekte auf das lokale Reibverhalten von Elastomeren im Gleit- und Rollkontakt, Tagungsband VDI-Tagung Reifen-Fahrwerk-Fahrbahn. VDI-Berichte Düsseldorf, 1912
ISBN: 3-18-091912-4 -
(2005): Contact Behaviour of a Sliding Rubber Element, Lecture notes in applied and computational mechanics. - Berlin [u.a.] : Springer; 27
ISBN: 3-540-31760-0 -
(2002): Spatial Dynamics of Tuned and Mistuned Bladed Disk Assemblies with Cylindrical and Wedge Shaped Friction Dampers, Paper No. DD-028, Proc. of ISROMAC-9, The 9th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, USA, February 10-14, 2002
-
(2001): Schwingungsanalyse verstimmter Schaufelkränzemit Reibelementen, Wien, Tagungsband Schwingungen in rotierenden Maschinen V. Wien, February 26-28, 2001
-
(1998): Growth and Collapse of Vapor Bubbles in Subcooled Boiling near the Region of Alternating Boiling Modes, Kyongju, Korea, 11th Int. Heat Transfer Conf. 2, Kyongju, Korea, August 23-28, 1998
Berichte
-
(2019): Frequenz- und Dämpfungsvorhersage für freistehende Turbinenschaufeln mit Unterplattform-Dämpfer, Leibniz Universität Hannover, Förderkennzeichen BMWi 03ET7041L
DOI: 10.2314/KXP:1689220627 -
(2017): Mistuning aerodynamisch und strukturmechanisch gekoppelter Beschaufelungen, Abschlussbericht, FVV-Frühjahrstagung 2017, Bad Neuenahr, FVV-Heft R 579
-
(2015): Mistuning aerodynamisch und strukturmechanisch gekoppelter Beschaufelungen, Zwischenbericht, FVV-Herbsttagung 2015, Würzburg, FVV-Heft R 573
-
(2007): 5. Paderborner Workshop Entwurf mechatronischer Systeme, Paderborn: Universität Paderborn, Heinz Nixdorf Institut, Verlagsschriftenreihe, Bd. 210
ISBN: 978-3-939350-29-3 -
(2007): Systematik zur lichtechnischen Gestaltung von aktiven Scheinwerfen, Universität Paderborn, Heinz Nixdorf Institut
Zeitschrift
-
(2019): Parameter on Nonlinear Energy Sink attached to Multiple Degree of Freedom System, PAMM Proceedings in Applied Mathematics and Mechanics, Vol. 19, No. 1, 2019
DOI: 10.1002/pamm.201900272 -
(2016): Portable Friction Tester, Tire Technology International - Annual Review, pp. 64-66
-
(2015): Transient amplification of maximum vibration amplitudes, Proc. Appl. Math. Mech., 15: 47-48
DOI: 10.1002/pamm.201510014 -
(2015): Evaluation of a Finite Element Approach for Damping Determination, Proc. Appl. Math. Mech., 15: 201–202
DOI: 10.1002/pamm.201510091 -
(2015): The Vibrational Behavior of Coupled Bladed Disks with Variable Rotational Speed, Proc. Appl. Math. Mech., 15: 255–256
DOI: 10.1002/pamm.201510118 -
(2015): Harmonic Mistuning of Blisks, Proc. Appl. Math. Mech., 15: 641-642
DOI: 10.1002/pamm.201510310 -
(2012): Improved pen harvester for powering a pulse rate sensor, Proc. of SPIE Vol. 8341, 83411D-1
-
(2011): Reibkraftreduktion mittels Ultraschallanregung in der Bodenbearbeitung, Landtechnik Band 66 Heft 1, pp. 10-13
DOI: 10.15150/lt.2011.341 -
(2010): Nonlinear Vibrations with Friction: A Multiharmonic Approach, Proc. Appl. Math. Mech., 10: 245–246
DOI: 10.1002/pamm.201010115 -
(2009): Mechanical model of a mistuned 2DOF-structure coupled by viscous damping, Proc. Appl. Math. Mech., 9: 237–238
DOI: 10.1002/pamm.200910092 -
(2009): Precise Calculation of Piezoelectric Switching Techniques for Vibration Damping, SPIE conference Smart structures and materials, San Diego
-
(2009): Vibration Damping with Piezoceramics Shunted to Negative Capacitance Networks, Proceedings IEEE/ASME Int. Conf. on Advanced Intelligent Mechatronics (AIM), Singapure
-
(2009): Piezoelectric self-sensing system for tactile intraoperative brain tumor delineation in neurosurgery, Engineering in Medicine and Biology Society, EMBC 2009, Annual International Conference of the IEEE, pp.737-740, USA
-
(2009): Development of An Active Squeeze Film Journal Bearing Using High Power Ultrasonic Transducers, Proc, ASME 2009 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Oxnard, California, USA
-
(2009): Design and experimental investigations of high power piezoelectric transducers for a novel squeeze film journal bearing, Proc. SPIE, Vol. 7288, Active and Passive Smart Structures and Integrated Systems, San Diego, CA, USA
-
(2009): A standing wave acoustic levitation system for large planar objects, Archive of Applied Mechanics, Springer
DOI: 10.1007/s00419-009-0401-3 -
(2009): Experimental Investigations of Ultrasonic Levitation in A Machine Tool Spindle System, Proc. 2009 IEEE International Ultrasonics Symposium, Roma, Italy
-
(2009): Design and modeling of a novel squeeze film journal bearing, IEEE International Conference on Mechatronics and Automation, Changchun, Jilin, China
-
(2008): Ultrasonic deep hole drilling in Electrolytic Copper ECu 57, CIRP Annals – Manufacturing Technology, 2008, 57 (1), S. 53-56
DOI: 10.1016/j.cirp.2008.03.078 -
(2008): Neue mechatronische Analogien in der Magnetik zur Modellierung elektromagnetomechanischer Systeme, Forschung im Ingenieurwesen, 2008, 72, 121-133
DOI: 10.1007/s10010-008-0074-z -
(2008): Driving Concepts for bundled Ultrasonic Linear Motors, Journal of Electroceramics, 2008, 20 (3-4), S. 153-158
DOI: 10.1007/s10832-007-9123-5 -
(2008): Analytical and Experimental Investigation of the Frequency Ratio and switching Law for Piezoelectric switching Techniques, Smart Materials and Structures, 2008, 17 (3), Art. No. 035003
DOI: 10.1088/0964-1726/17/3/035003 -
(2008): Piezoelectric Actuator Design for ultrasonically assisted deep hole drilling, Journal of Electroceramics, 2008, 20 (3-4), S. 187-192.
DOI: 10.1007/s10832-007-9132-4 -
(2008): Tactile Tissue Characterisation by Piezoelectric Systems, Journal of Electroceramics, 2008, 20 (3-4), S. 237-241
DOI: 10.1007/s10832-007-9183-6 -
(2008): Digital signal processing for an adaptive phase-locked loop controller, Proc. SPIE 6926, 69260A
DOI: 10.1117/12.776091 -
(2008): Fundamental Experiments as Benchmark Problems for modeling Ultrasonic Micro-Impact Processes, Journal of Electroceramics, 2008, 20 (3-4), S. 209-214
DOI: 10.1007/s10832-007-9169-4 -
(2008): Power Output Estimation and Experimental Validation for Piezoelectric Energy Harvesting Systems, Journal of Electroceramics, 2008, 20 (3-4), S. 203-208
DOI: 10.1007/s10832-007-9168-5 -
(2008): Development of a Biomedical Tissue Differentiation System using piezoelectric actuators, IEEE International Frequency Control Symposium, FCS, 2008, Art. No. 4622963, S. 91-94
-
(2007): Resonant vibrating Sensors for Tactile Tissue Differentiation, Journal of Sound and Vibration, 1st International Conference on Vibro-Impact Systems, 20-22 July 2006, Loughborough, UK, Elsevier, S. 441-446
DOI: 10.1016/j.jsv.2007.03.063
ISBN: ISSN 0022-460X -
(2007): The Vibrational Behaviour of Bladed Disks with Multiple Coupling Devices, Proc. Appl. Math. Mech., 7: 4040037–4040038
DOI: 10.1002/pamm.200700724 -
(2007): Driving concepts for bundled ultrasonic linear motors, Journal of Electroceramics
-
(2007): Driving Concepts for bundled Ultrasonic Linear Motors, Journal of Electroceramics
DOI: 10.1007/s10832-007-9123-5
ISBN: ISSN 1385-3449 -
(2007): Results of an Industry Survey on the Application of Dependability Oriented Design Methods, In: The Future of Product Development. Proceedings of the 17th CIRP Design Conference, Berlin, Springer-Verlag, 2007, S. 175-184
-
(2007): Modellierung der Schwingungen beim Werkzeugschleifen, Proc. Appl. Math. Mech., 7: 4050029–4050030
DOI: 10.1002/pamm.200700845 -
(2007): Piezoelectric Actuator Design for ultrasonically assisted deep hole drilling, Journal of Electroceramics
DOI: 10.1007/s10832-007-9132-4
ISBN: ISSN 1385-3449 -
(2007): Modeling Approaches for an Ultrasonic Percussion Drill, Journal of Sound and Vibration, S. 405-417
-
(2007): Model based Analysis of an Ultrasonic Percussion Drill, In: ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering
-
(2007): Model Based Design of Piezoelectric Generators Utilising Geometrical and Material Properties, 2006 International Mechanical Engineering Congress & Exposition (IMECE 2006), 5-10 November, Chicago, Illinois, USA
-
(2007): Design Method for Piezoelectric bending Generators in Energy Harvesting Systems, In: Active and Passive Smart Structures and Integrated Systems 2007, San Diego, USA, SPIE, 2007, Bd. 6525, Nr. 652504
-
(2007): Damping of Structural Vibrations using an Electromotive Eddy Current Damper, Proc. Appl. Math. Mech., 7: 4040039–4040040
DOI: 10.1002/pamm.200700739 -
(2007): Fundamental Experiments as Benchmark Problems for modelling Ultrasonic Micro-Impact Processes, Journal of Electroceramics
DOI: 10.1007/s10832-007-9169-4
ISBN: ISSN 1385-3449 -
(2007): Power output Estimation and Experimental Validation for Piezoelectric Energy Harvesting Systems, In: Journal of Electroceramics
DOI: 10.1007/s10832-007-9168-5
ISBN: ISSN 1385-3449 -
(2006): Aufbau und Regelung einer Magnetführung für Werkzeugmaschinen, Proc. Appl. Math. Mech., 6: 801–802
DOI: 10.1002/pamm.200610380 -
(2006): Symmetric and Asymmetric Underplatform Dampers for Turbine Blades, Proc. Appl. Math. Mech., 6: 251–252
DOI: 10.1002/pamm.200610106 -
(2006): Experimental Analysis of Shrouded Blades with Friction Contact, Proc. Appl. Math. Mech., 6: 263–264
DOI: 10.1002/pamm.200610112 -
(2005): The Vibrational Behavior of Bladed Disks in Consideration of Friction Damping and Contact Elasticity, Proc. Appl. Math. Mech., 5: 131–132
DOI: 10.1002/pamm.200510046 -
(2003): Design of Friction Dampers for Mistuned Bladed Disks, Proc. Appl. Math. Mech. 3, 118–119
DOI: 10.1002/pamm.200310336 -
(2001): Vibrational Behaviour of Turbine Blade Assemblies with Friction Dampers, Zeitschrift für angewandte Math. Mech. 81, 207-208, Berlin
Patentschriften
-
(2018): Elektromagnetischer Schwingungsanreger zur Schwingungsanregung der Schaufeln eines Schaufelkranzes, Patent DE 10 2017 114 153 A1 2018.12.27, Offenlegungsschrift vom 27.12.2018
-
(2011): Verfahren zum Dämpfen von während des Betriebes auftretenden mechanischen Schwingungen in einer Turbomaschinenschaufel, Turbomaschinenschaufel zur Durchführung des Verfahrens sowie piezoelektrisches Dämpfungselement zum Einbau in eine solche Turbomaschinenschaufel, Europäische Patentanmeldung EP 2 458 150 A1, 04.11.2011
[nicht kategorisiert]
-
(2010): Dissertation: Modellierung und experimentelle Parameteridentifikation nichtlinearer Reibkontakte bei Turbinenschaufeln , Berichte aus dem IDS, Band 01/2010.
-
(2010): Dissertation: Aktive Schwingungsminderung an gekoppelten Zylindern in Rollenoffsetdruckmaschinen mittels piezokeramischer Aktoren an den Lagerstellen , Berichte aus dem IDS, Band 02/2010.
-
(2010): Dissertation: Aktive Schwingungsreduktion durch Magnetführungen , Berichte aus dem IDS, Band 03/2010.
-
(2010): Dissertation: Investigation of Non-contact Bearing Systems Based of Ultrasonic Levitation, Berichte aus dem IDS, Band 04/2010.
-
(2009): Schwingungsdämpfung mit beschalteten Piezowandlern und Anwendung zur Unterdrückung von Bremsenquietschen, Berichte aus dem IDS, Bd. 2, Dissertation, Hannover, Germany
-
(2009): Entwicklung eines Modells für Formgedächtnisaktoren im geregelten dynamischen Betrieb, Berichte aus dem IDS, Bd. 3, Dissertation, Hannover, Germany