Publikationen

Zeitschrift (reviewed)

  • Brinkmann, K.; Hoffmann, T.; Panning-von Scheidt, L.; Stüer, H. (2023): Transient resonance passage of a mistuned bladed disk with and without underplatform dampersInternational Journal of Turbomachinery, Propulsion and Power, 2023, 8(4), 38.
    DOI: 10.3390/ijtpp8040038
  • Amer, M., Paehr, M.; Panning-von Scheidt, L.; Seume, J. R.; Schmied, J. (2022): Determining the Influence of Casing Vibrational Behaviour On Rotordynamics.ASME. J. Eng. Gas Turbines Power 144(5): 051012
    DOI: 10.1115/1.4053123
  • Maroldt, N.; Schwerdt, L.; Berger, R.; Panning-von Scheidt, L.; Rolfes, R.; Wallaschek, J.; Seume, J. R. (2022): Reduced Order Modeling of Forced Response in a Multistage Compressor Under Mistuning and AerocouplingASME. J. Eng. Gas Turbines Power 144(11): 111017
    DOI: https://doi.org/10.1115/1.4055368
  • Carassale, L.; Denoël, V.; Martel, C.; Panning-von Scheidt, L. (2021): Key Features of the Transient Amplification of Mistuned SystemsASME. J. Eng. Gas Turbines Power. March 2021; 143(3): 031016.
    DOI: 10.1115/1.4049501
  • Hoffmann, T.; Panning-von Scheidt, L.; Wallaschek, J. (2021): Single Nodal Diameter Excitation of Turbine Blades: Experimental and Theoretical Study.ASME. J. Eng. Gas Turbines Power. September 2021; 143(9): 091028.
    DOI: https://doi.org/10.1115/1.4051172
  • Förster, A.; Panning-von Scheidt, L.; Wallaschek, J. (2020): Equivalent Linearization of Bladed Disk Assemblies with Friction Nonlinearities Under Random ExcitationJournal of Engineering for Gas Turbines and Power
    DOI: 10.1115/1.4048407
  • Heinze, T.; Panning-von Scheidt, L.; Wallaschek, J. (2020): Global detection of detached periodic solution branches of friction-damped mechanical systems.Nonlinear Dynamics. 99(2).
    DOI: 10.1007/s11071-019-05425-4
  • Schwerdt, L.; Panning-von Scheidt, L.; Wallaschek, J. (2020): A Model Order Reduction Method for Bladed Disks with Large Geometric Mistuning using a Partially Reduced Intermediate System ModelJ. Eng. Gas Turbines Power
    DOI: 10.1115/1.4049357
  • Hoffmann, T.; Panning-von Scheidt, L.; Wallaschek, J. (2019): Measured and Simulated Forced Response of a Rotating Turbine Disk with Asymmetric and Cylindrical Underplatform DampersJournal of Engineering for Gas Turbines and Power
    DOI: 10.1115/1.4045337
  • Schwerdt, L.; Willeke, S.; Panning-von Scheidt, L.; Wallaschek, J. (2019): Reduced-Order Modeling of Bladed Disks Considering Small Mistuning the Disk SectorsJ. Eng. Gas Turbines Power. May 2019, 141(5): 052502 (7 pages)
    DOI: 10.1115/1.4041071
  • Hoffmann, T.; Panning-von Scheidt, L.; Wallaschek, J. (2019): Analysis of Contacts in Friction Damped Turbine Blades using Dimensionless NumbersJ. Eng. Gas Turbines Power. Dec 2019, 141(12): 121023 (7 pages)
    DOI: 10.1115/1.4044481
  • Jahn, M.; Tatzko, S.; Panning-von Scheidt, L.; Wallaschek, J. (2019): Comparison of different harmonic balance based methodologies for computation of nonlinear modes of non-conservative mechanical systemsMech. Syst. Signal Process. 127 (2019), 159-171
    DOI: 10.1016/j.ymssp.2019.03.005
  • Wallaschek, J.; Willeke, S.; Panning-von Scheidt, L. (2019): Discussion of “Dynamic Modeling and Projection-Based Reduction Methods for Bladed Disks with Nonlinear Frictional and Intermittent Contact Interfaces” (Mitra, M., Epureanu, B. I., 2018, ASME Appl. Mech. Rev., 71(5), p. 050803).ASME. Appl. Mech. Rev. September 2019; 71(5): 055502.
    DOI: 10.1115/1.4044933
  • Hüls, M.; Panning-von Scheidt, L.; Wallaschek, J. (2018): Combined Airfoil and Snubber Design Optimization of Turbine Blades With Respect to Friction DampingJ. Turbomach. 2018; 140(8):081007-081007-11, TURBO-18-1048
    DOI: 10.1115/1.4040679
  • Heinze, T.; Panning-von Scheidt, L.; Wallaschek, J.; Hartung, A. (2018): Rotational Speed-Dependent Contact Formulation for Nonlinear Blade Dynamics PredictionJ. Eng. Gas Turbines Power. 2018; 141(4):042503-042503-11
    DOI: 10.1115/1.4040843
  • Hüls, M.; Panning-von Scheidt, L., Wallaschek, J. (2018): Influence of Geometric Design Parameters onto Vibratory Response and HCF Safety for Turbine Blades with Friction DamperJ. Eng. Gas Turbines Power. 2018; 141(4):041022-041022-10
    DOI: 10.1115/1.4040732
  • Willeke, S.; Schwerdt, L.; Panning-von Scheidt, L., Wallaschek, J. (2018): Intentional Response Reduction by Harmonic Mistuning of Bladed Disks with Aerodynamic DampingJ. Eng. Gas Turbines Power. 2018;140(12):121010-121010-10
    DOI: 10.1115/1.4040898
  • Förster, A.; Panning-von Scheidt, L.; Wallaschek, J. (2018): Approximate Solution of the Fokker–Planck Equation for a Multidegree of Freedom Frictionally Damped Bladed Disk Under Random ExcitationJ. Eng. Gas Turbines Power. 2018; 141(1):011004-011004-8, Paper No: GTP-18-1279
    DOI: 10.1115/1.4040740
  • Hartung, A.; Hackenberg, H.-P.; Krack, M.; Gross, J.; Heinze, T.; Panning-von Scheidt, L. (2018): Rig and Engine Validation of the Nonlinear Forced Response Analysis Performed by the Tool OrAgLJ. Eng. Gas Turbines Power. 2018; 141(1):011004-011004-8, Paper No: GTP-18-1279
    DOI: 10.1115/1.4041160
  • Bonhage, M.; Adler, J.T.; Kolhoff, C.; Hentschel, O.P.; Schlesier, K.-D.; Panning-von Scheidt, L.; Wallaschek, J. (2018): Transient amplitude amplification of mistuned structures: An experimental validationJ. Sound and Vibration 436 (2018) 236–252
    DOI: 10.1016/j.jsv.2018.07.031
  • Pohle, L.; Tatzko, S.; Panning-von Scheidt, L.; Wallaschek, J. (2017): High Order Sensitivity Analysis of a Mistuned Blisk Including Intentional Mistuning J. of Theoretical and Applied Mechanics 55, 1, 353-368
    DOI: 10.15632/jtam-pl.55.1.353
  • Heinze, T.; Panning-von Scheidt, L.; Wallaschek, J.; Hartung, A. (2017): A Taylor Series Expansion Approach for Nonlinear Blade Forced Response Prediction Considering Variable Rotational SpeedJ. Eng. Gas Turbines Power 139(6), 062503
    DOI: 10.1115/1.4035286
  • Willeke, S.; Panning-von Scheidt, L.; Wallaschek, J. (2017): Reduced Order Modeling of Mistuned Bladed Disks under RotationTechnische Mechanik, 37, 2-5, (2017), S. 314 – 325
    DOI: https://doi.org/10.24352/UB.OVGU-2017-107
  • Krack, M.; Panning-von Scheidt, L.; Wallaschek, J.: (2016): On the Interaction of Multiple Traveling Wave Modes in the Flutter Vibrations of Friction-Damped Tuned Bladed DisksJ. Eng. Gas Turbines Power 139(4), 042501
    DOI: 10.1115/1.4034650
  • Hentschel, O. P.; Bonhage. M.; Panning-von Scheidt, L.; Wallaschek, J.; Denk, M.; Masserey, P.-A. (2016): Analysis of an experimental setup for structural damping identificationJournal of Theoretical and Applied Mechanics 54, 1, 27-39
    DOI: 10.15632/jtam-pl.54.1.27
  • Bonhage, M.; Pohle, L.; Panning-von Scheidt, L.; Wallaschek, J. (2015): Transient Amplitude Amplification of Mistuned BlisksJ. Eng. Gas Turbines Power 137, 112502-1
    DOI: 10.1115/1.4030278
  • Hentschel, O. P.; Panning-von Scheidt, L.; Wallaschek, J.; Denk, M. (2015): Introduction and Evaluation of a Damping Determination Method Based on the Short-Term Fourier Transform and Resampling (STFR)Journal of Theoretical and Applied Mechanics 53, 2, 395-407
    DOI: 10.15632/jtam-pl.53.2.395
  • Krack, M.; Panning-von Scheidt, L.; Wallaschek, J. (2014): On the Computation of the Slow Dynamics of Nonlinear Modes of Mechanical SystemsMechanical Systems and Signal Processing 42 (1-2), 71-87
    DOI: 10.1016/j.ymssp.2013.08.031
  • Krack, M.; Tatzko, S.; Panning-von Scheidt, L.; Wallaschek, J. (2014): Reliability Optimization of Friction-Damped Systems Using Nonlinear ModesJournal of Sound and Vibration 333, 2699–2712
    DOI: 10.1016/j.jsv.2014.02.008
  • Krack, M.; Panning-von Scheidt, L.; Wallaschek, J.; Siewert, C.: Hartung, A. (2013): Reduced Order Modeling Based on Complex Nonlinear Modal Analysis and its Application to Bladed Disks with Shroud ContactJ. Eng. Gas Turbines Power 135 (10), 102502–102509
    DOI: 10.1115/1.4025002
  • Krack, M.; Panning-von Scheidt, L.; Wallaschek, J. (2013): A High-Order Harmonic Balance Method for Systems with Distinct StatesJournal of Sound and Vibration 332 (21): 5476-5488
    DOI: 10.1016/j.jsv.2013.04.048
  • Krack, M.; Panning-von Scheidt, L.; Wallaschek, J. (2013): A Method for Nonlinear Modal Analysis and Synthesis: Application to Harmonically Forced and Self-Excited Mechanical SystemsJournal of Sound and Vibration 332 (25): 6798–6814
    DOI: 10.1016/j.jsv.2013.08.009
  • Laborenz, J.; Krack M., Panning-von Scheidt, L.; Wallaschek, J.; Denk, M.; Masserey, P. (2012): Eddy Current Damper for Turbine Blading: Electromagnetic Finite Element Analysis and Measurement ResultsJ. Eng. Gas Turbines Power 134, 042504
    DOI: 10.1115/1.4004734
  • Siewert, C.; Panning, L.; Wallaschek, J.; Richter, C. (2010): Multiharmonic Forced Response Analysis of a Turbine Blading Coupled by Nonlinear Contact ForcesJ. Eng. Gas Turbines Power 132(8), 082501-1-082501-9
    DOI: 10.1115/1.4000266
  • Laborenz, J.; Siewert, C.; Panning, L.; Wallaschek, J.; Gerber, C.; Masserey, P.-A. (2010): Eddy Current Damping - A Concept Study For Steam Turbine BladingJ. Eng. Gas Turbines Power 132(5), 052505-1-052505-7
    DOI: 10.1115/1.3205032
  • Panning, L.; Sextro, W.; Popp, K. (2003): Spatial Dynamics of Tuned and Mistuned Bladed Disks with Cylindrical and Wedge Shaped Friction DampersInt J. of Rotating Machinery (9)3, 219-228
    DOI: 10.1155/S1023621X03000198
  • Popp, K.; Panning, L.; Sextro, W. (2003): Vibration Damping by Friction Forces - Theory and ApplicationsJ. Vibration and Control (9)3-4, 419-448
    DOI: 10.1177/107754603030780

Konferenz (reviewed)

  • Brinkmann, K.; Hoffmann, T.; Panning-von Scheidt, L.; Stüer, H. (2023): Transient resonance passage of a mistuned bladed disk with and without underplatform dampersProceedings of 15th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics (ETC15), Budapest, April 24-28, 2023.
  • Jäger, F.; Panning-von Scheidt, L.; Wallaschek, J. (2023): Experimental and Numerical Analysis of Rotational Speed Influence on the Nonlinear Dynamic of Turbine Blades with Shroud CouplingProceedings of the International Gas Turbine Congress 2023, November 26 - Dezember 1, Kyoto, Japan, 2023
  • Schlesier, K.-D.; Panning‐von Scheidt, L.; Ehehalt, U.; Levin Rojas, R. (2023): Investigations on Laterally Coupled Rotor‐Blade‐VibrationsIn: Rinderknecht, S.; Schüßler, B.; Schwarz, S. (Hrsg.) (2023): Proceedings of SIRM 2023 - The 15th European Conference on Rotordynamics. Darmstadt, Germany, 22.-24.02.2023
    DOI: 10.26083/tuprints-00024057
  • Brinkmann, K.; Panning‐von Scheidt, L.; Stüer, H. (2023): Geometrically Mistuned Blisks: Strain Gauge and Tip Timing Vibration Measurements of Rotating Blades with and Without Underplatform DampersRinderknecht, S.; Schüßler, B.; Schwarz, S. (Hrsg.) (2023): Proceedings of SIRM 2023 - The 15th European Conference on Rotordynamics. Darmstadt, Germany, 22.-24.02.2023
    DOI: 10.26083/tuprints-00024057
  • Strehlau, U.; Langheinrich, D.; Beirow, B.; Xiao, Y.; Panning‐von Scheidt, L. (2023): Geometrically Mistuned Blisks: Assessment of Geometric Uncertainties and Finite‐Element Mesh MorphingRinderknecht, S.; Schüßler, B.; Schwarz, S. (Hrsg.) (2023): Proceedings of SIRM 2023 - The 15th European Conference on Rotordynamics. Darmstadt, Germany, 22.-24.02.2023
    DOI: 10.26083/tuprints-00024057
  • Förster, A.; Panning-von Scheidt, L. (2022): Interface Reduction in an Equivalent Linearization Algorithm for Nonlinearly Coupled Systems Under Random ExcitationASME 2022 Turbo Expo
    DOI: 10.1115/GT2022-78367
  • Maroldt, N.; Schwerdt, L.; Berger, R.; Panning-von Scheidt, L.; Rolfes, R.; Wallaschek, J.; Seume, J. R. (2022): Reduced Order Modeling of Forced Response in a Multistage Compressor Under Mistuning and AerocouplingASME paper GT2022-81090, Int. Gas Turbine & Aeroeng. Congress and Exh., Rotterdam, 2022, pp. 1-12
    DOI: http://dx.doi.org/10.1115/GT2022-81090
  • Schwerdt, L.; Maroldt, N.; Panning-von Scheidt, L.; Wallaschek, J.; Seume, J. (2022): An Improved Reduced Order Model for Bladed Disks Including Multistage Aeroelastic and Structural CouplingProceedings of Global Power and Propulsion Society GPPS Chania22, 18th–20th September, 2022.
    DOI: 10.33737/gpps22-tc-106
  • Amer, M.; Paehr, M.; Panning-von Scheidt, L.; Seume, J.; Schmied, J. (2021): Determining the influence of casing vibrational behaviour on rotordynamicsPaper ID-021, SIRM 14th International Conference on Dynamics of Rotating Machines, Gdańsk, Poland, 17th –19th February, 2021
  • Jäger, F.; Kaptan, F.; Panning-von Scheidt, L.; Wallaschek, J. (2021): Development of a Multi-Shaker-Control to Investigate the Influence of the Interblade Phase Angle on Frictionally Damped Turbine BladesASME paper GT2021-59272, Int. Gas Turbine & Aeroeng. Congress and Exh., virtual
    DOI: https://doi.org/10.1115/GT2021-59272
  • Förster, A.; Panning-von Scheidt, L. (2021): Calculation of Nonlinear Systems under Narrow Band Excitation Using Equivalent Linearization and Path ContinuationASME paper GT2021-58437, Int. Gas Turbine & Aeroeng. Congress and Exh., virtual
    DOI: 10.1115/GT2021-58437
  • Carassale, L.; Denoël, V.; Martel, C.; Panning-von Scheidt, L. (2020): Identification of the essential features of the transient amplification of mistuned systems.Paper GT2020-15693, Proceedings of the ASME 2020 Turbo Expo Conference (2020); ASME Turbo Expo: Turbomachinery Technical Conference & Exhibition, London, UK, September 2020
    DOI: https://doi.org/10.1115/GT2020-15693
  • Förster, A.; Panning-von Scheidt, L.; Wallaschek,J. (2020): Equivalent Linearization of Bladed Disk Assemblies with Friction Nonlinearities Under Random ExcitationASME 2020 Turbo Expo
    DOI: 10.1115/GT2020-14264
  • Hoffmann, T.; Panning-von Scheidt, L.; Wallaschek, J. (2020): Single Nodal Diameter Excitation of Turbine Blades: Experimental and Theoretical StudyPaper GT2020-14282, Proceedings of the ASME 2020 Turbo Expo Conference (2020); ASME Turbo Expo: Turbomachinery Technical Conference & Exhibition, London, UK, September 2020
    DOI: https://doi.org/10.1115/GT2020-14282
    ISBN: 978-0-7918-8423-2
  • Schwerdt, L.; Panning-von Scheidt, L.; Wallaschek, J. (2020): A Model Order Reduction Method for Bladed Disks with Large Geometric Mistuning using a Partially Reduced Intermediate System ModelPaper GT2020-14199, Proceedings of the ASME 2020 Turbo Expo Conference (2020); ASME Turbo Expo: Turbomachinery Technical Conference & Exhibition, London, UK, September 2020
  • Schwerdt. L.; Berger, R.; Panning-von Scheidt, L.; Gebhardt, C.G.; Wallaschek, J.; Rolfes, R. (2019): Probabilistic Study of Blend Repairs on an Axial Compressor Blisk using the Subset of Nominal Modes MethodProc. IGTC Int. Gas Turbine Congress, Tokyo, 2019
  • Schwerdt, L.; Willeke, S.; Panning-von Scheidt, L.; Wallaschek, J. (2018): Reduced-Order Modeling of Bladed Disks Considering Small Mistuning the Disk SectorsProceedings of the ASME Turbo Expo: Turbomachinery Technical Conference and Exposition, 2018
    DOI: 10.1115/GT2018-76610
  • Schlesier, K.-D.; Panning-von Scheidt, L., Wallaschek, J. (2018): Investigations on Transient Amplitude Amplification by Applying Intentional MistuningASME paper GT2018-75514, Int. Gas Turbine & Aeroeng. Congress and Exh., Oslo, 2018
  • Kaptan, F.; Panning-von Scheidt, L.; Wallaschek, J. (2018): Numerical and Experimental Study of Shrouded Blade Dynamics Considering Variable Operating PointsASME paper GT2018-76692, Int. Gas Turbine & Aeroeng. Congress and Exh., Oslo, 2018
  • Heinze, T.; Panning-von Scheidt, L.; Wallaschek, J.; Hartung, A. (2018): Rotational Speed-Dependent Contact Formulation for Nonlinear Blade Dynamics PredictionASME paper GT2018-75290, Int. Gas Turbine & Aeroeng. Congress and Exh., Oslo, 2018
  • Hüls, M.; Panning-von Scheidt, L., Wallaschek, J. (2018): Influence of Geometric Design Parameters onto Vibratory Response and HCF Safety for Turbine Blades with Friction DamperASME paper GT2018-75363, Int. Gas Turbine & Aeroeng. Congress and Exh., Oslo, 2018
  • Willeke, S.; Schwerdt, L.; Panning-von Scheidt, L., Wallaschek, J. (2018): Intentional Response Reduction by Harmonic Mistuning of Bladed Disks with Aerodynamic DampingASME paper GT2018-76601, Int. Gas Turbine & Aeroeng. Congress and Exh., Oslo, 2018
  • Förster, A.; Panning-von Scheidt, L.; Wallaschek, J. (2018): Approximate Solution of the Fokker–Planck Equation for a Multidegree of Freedom Frictionally Damped Bladed Disk Under RandomASME paper GT2018-75755, Int. Gas Turbine & Aeroeng. Congress and Exh., Oslo, 2018
  • Hartung, A.; Hackenberg, H.-P.; Krack, M.; Gross, J.; Heinze, T.; Panning-von Scheidt, L. (2018): Rig and Engine Validation of the Nonlinear Forced Response Analysis Performed by the Tool OrAgLASME paper GT2018-75186, Int. Gas Turbine & Aeroeng. Congress and Exh., Oslo, 2018
  • Schwerdt, L.; Panning-von Scheidt, L.; Wallaschek, J.; Berger, R.; Rolfes, R; Keller, C.; Seume, J. (2017): Influence of Blade Repairs on Compressor Blisk Vibration considering Aerodynamic Damping and MistuningProceedings of Shanghai 2017 Global Power and Propulsion Forum, GPPS-2017-0142
  • Heinze, T.; Panning-von Scheidt, L.; Wallaschek, J. (2017): Nodal diameter-dependent modal damping method for nonlinear blade dynamics prediction considering variable rotational speedProceedings of ASME Turbo Expo 2017, 26-30 June, Charlotte, NC, USA
  • Hoffmann, T.; Panning-von Scheidt, L.; Wallaschek, J. (2017): Modelling friction characteristics in turbine blade vibrations using a Fourier series expansion of a real friction hysteresis. X International Conference on Structural Dynamics, EURODYN 2017, Rome, Italy, Procedia Engineering 199 (2017) 669–674, 2017
    DOI: 10.1016/j.proeng.2017.09.586
  • Willeke, S.; Panning-von Scheidt, L.; Wallaschek, J. (2017): Reduced Order Modeling of Mistuned Bladed Disks Under Rotation12th International Conference on Vibrations in Rotating Machines (SIRM 2017), Graz, Austria, February 15-17, 2017
  • Willeke, S.; Keller, C.; Panning-von Scheidt, L.; Seume, J.R.; Wallaschek, J. (2017): Reduced Order Modeling of Mistuned Bladed Disks Considering Aerodynamic Coupling and Mode Family Interaction12th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics (ETC12), Stockholm, April 3-7, 2017
  • Schwerdt, L.; Hauptmann, T.; Kunin, A.; Seume, J.R.; Wallaschek, J.; Wriggers, P.; Panning-von Scheidt, L.; Löhnert, S. (2017): Aerodynamical and Structural Analysis of Operationally Used Turbine BladesIn: Procedia CIRP 59, 77–82
    DOI: 10.1016/j.procir.2016.09.023
  • Krack, M.; Panning-von Scheidt, L.; Wallaschek, J. (2016): On the Interaction of Multiple Traveling Wave Modes in the Flutter Vibrations of Friction-Damped Tuned Bladed DisksPaper No. GT2016-56126, ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition, Seoul, South Korea, June 13–17, 2016
    DOI: 10.1115/GT2016-56126
  • Heinze, T.; Panning-von Scheidt, L.; Wallaschek, J.; Hartung, A. (2016): A Taylor Series Expansion Approach for Nonlinear Blade Forced Response Prediction Considering Variable Rotational SpeedPaper No. GT2016-56375, ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition, Seoul, South Korea, June 13–17, 2016
    DOI: 10.1115/GT2016-56375
  • Tatzko, S.; Panning-von Scheidt, L.; Wallaschek, J. (2014): Dynamics of Bladed Disks with Frictional Coupling and Alternate Mistuning PatternPaper No. IMECE2014-38263, Proceedings of the ASME 2014 International Mechanical Engineering Congress and Exposition (IMECE), November 14-20, 2014, Montreal, Canada
    DOI: 10.1115/IMECE2014-38263
  • Pohle, L.; Panning-von Scheidt, L.; Wallaschek, J., Aschenbruck, J.; Seume, J.R. (2014): Dynamic Behavior of a Mistuned Air Turbine: Comparison Between Simulations and MeasurementsPaper No. GT2014-26025, ASME Turbo Expo 2014: Turbomachinery Technical Conference and Exposition, Düsseldorf, Germany, June 16-20, 2014
    DOI: 10.1115/GT2014-26025
  • Herzog, A.; Krack, M.; Panning-von Scheidt, L.; Wallaschek, J. (2014): Comparison of two Widely-Used Frequency-Time Domain Contact Models for the Vibration Simulation of Shrouded Turbine BladesPaper No. GT2014-26226, ASME Turbo Expo 2014: Turbomachinery Technical Conference and Exposition, Düsseldorf, Germany, June 16-20, 2014
    DOI: 10.1115/GT2014-26226
  • Hentschel, O.; Panning-von Scheidt, L.; Wallaschek, J.; Denk, M.; Masserey P.-A. (2014): Influential Parameters on Structural Damping Values of Turbine BladesPaper No. GT2014-25656, ASME Turbo Expo 2014: Turbomachinery Technical Conference and Exposition, Düsseldorf, Germany, June 16-20, 2014
    DOI: 10.1115/GT2014-25656
  • Krack, M.; Panning-von Scheidt, L.; Wallaschek, J.; Siewert, C.; Hartung, A. (2013): Reduced Order Modeling Based on Complex Nonlinear Modal Analysis and its Application to Bladed Disks With Shroud ContactPaper No. GT2013-94560, ASME Turbo Expo 2013: Turbomachinery Technical Conference and Exposition, San Antonio, Texas, June 3-6, 2013
    DOI: 10.1115/GT2013-94560
  • Tatzko, S.; Panning-von Scheidt, L.; Wallaschek, J.; Kayser, A.; Walz, G. (2013): Investigation of Alternate Mistuned Turbine Blades Non-Linear Coupled by Underplatform DampersPaper No. GT2013-95681, ASME Turbo Expo 2013: Turbomachinery Technical Conference and Exposition, San Antonio, Texas, June 3-6, 2013
    DOI: 10.1115/GT2013-95681
  • Aschenbruck, J.; Meinzer, C. E.; Pohle, L.; Panning-von Scheidt, L.; Seume, J. (2013): Regeneration-Induced Forced Response in Axial TurbinesPaper No. GT2013-95431, ASME Turbo Expo 2013: Turbomachinery Technical Conference and Exposition, San Antonio, Texas, June 3-6, 2013
    DOI: 10.1115/GT2013-95431
  • Krack, M.; Panning-von Scheidt, L.; Wallaschek, J.; Siewert, C.; Hartung, A. (2013): Analysis and Robust Design of Friction Joints for Vibration Reduction in Bladed DisksSIRM 2013- 10th International Conference on Vibrations in Rotating Machines, Berlin, February 25 - 27, 2013
  • Tatzko, S.; Panning-von Scheidt, L.; Wallaschek, J.; Kayser, A. (2012): Alternate Mistuning of Turbine Bladings Coupled by Underplatform DampersPaper No. IDETC/CIE2012-70863, Proceedings of ASME 2012 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE, Chicago, USA, August 12-15, 2012
    DOI: 10.1115/DETC2012-70863
  • Krack, M.; Herzog, A.; Panning-von Scheidt, L.; Wallaschek, J.; Siewert, C.; Hartung, A. (2012): Multiharmonic Analysis and Design of Shroud Friction Joints of Bladed Disks Subject to MicroslipPaper No. DETC/CIE2012-70184, Proceedings of ASME 2012 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE, Chicago, USA, August 12-15, 2012
    DOI: 10.1115/DETC2012-70184
  • Krack, M.; Panning-von Scheidt, L.; Wallaschek, J.; Siewert, C.; Hartung, A. (2012): Robust Design of Friction Interfaces of Bladed Disks with Respect to Parameter UncertaintiesPaper No. GT2012-68578, ASME Turbo Expo 2012: Turbomachinery Technical Conference and Exposition, Copenhagen, Denmark, June 11-15, 2012
    DOI: 10.1115/GT2012-68578
  • Schwarzendahl, S. M.; Szwedowicz. J.; Neubauer, M.; Panning-von Scheidt, L.; Wallaschek, J. (2012): On Blade Damping Technology Using Passive Piezo DampersPaper No. GT2012-68600, ASME Turbo Expo 2012: Turbomachinery Technical Conference and Exposition, Copenhagen, Denmark, June 11-15, 2012
    DOI: 10.1115/GT2012-68600
  • Schurzig, D.; Tatzko, S.; Panning-von Scheidt, L.; Wallaschek, J. (2012): Modeling Contact Dynamics of Vanes with Adjustable Upstream Flow AnglesPaper No. GT2012-68185, ASME Turbo Expo 2012: Turbomachinery Technical Conference and Exposition, Copenhagen, Denmark, June 11-15, 2012
    DOI: 10.1115/GT2012-68185
  • Bonhage, M.; Panning-von Scheidt, L.; Wallaschek, J.; Richter, C. (2012): Transient Resonance Passage with Respect to FrictionPaper No. GT2012-68986, ASME Turbo Expo 2012: Turbomachinery Technical Conference and Exposition, Copenhagen, Denmark, June 11-15, 2012
    DOI: 10.1115/GT2012-68986
  • Laborenz, J.; Krack; Panning-von Scheidt, L.; Wallaschek, J.; Denk, M.: Masserey, P.-A.: (2011): Eddy Current Damper for Turbine Blading: Electromagnetic Finite Element Analysis and Measurement ResultsPaper No. GT2011-45242, ASME Turbo Expo 2011: Turbomachinery Technical Conference and Exposition, Vancouver, Canada, June 6-10, 2011
    DOI: 10.1115/GT2011-45242
  • Hohl, A.; Kriegesmann, B.; Wallaschek, J.; Panning-von Scheidt, L. (2011): The Influence of Blade Properties on the Forced Response of Mistuned Bladed DisksPaper No. GT2011-46826, ASME Turbo Expo 2011: Turbomachinery Technical Conference and Exposition, Vancouver, Canada, June 6-10, 2011
    DOI: 10.1115/GT2011-46826
  • Hohl, A.; Siewert, C.; Panning, L.; Wallaschek, J. (2009): A Substructure Based Reduced Order Model for Mistuned Bladed DisksPaper No. DETC2009-87459, Proceedings of ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2009), San Diego, USA, August 30-September 2, 2009
    DOI: 10.1115/DETC2009-87459
  • Laborenz, J.; Siewert, C.; Panning, L.; Wallaschek, J.; Gerber, C.; Masserey, P.-A. (2009): Eddy Current Damping: A Concept Study for Steam Turbine BladingPaper No. GT2009-59593, ASME Turbo Expo 2009: Turbomachinery Technical Conference and Exposition, Orlando, Florida, June 8-12, 2009
    DOI: 10.1115/GT2009-59593
  • Siewert, C.; Panning, L.; Wallaschek, J.; Richter, C. (2009): Multiharmonic Forced Response Analysis of a Turbine Blading Coupled by Nonlinear Contact ForcesPaper No. GT2009-59201, ASME Turbo Expo 2009: Turbomachinery Technical Conference and Exposition, Orlando, Florida, June 8-12, 2009
    DOI: 10.1115/GT2009-59201
  • Siewert, C.; Panning, L.; Wallaschek, J. (2009): Nonlinear Multiharmonic Vibrations of Coupled Turbine BladingsSIRM 2009 - 8th International Conference on Vibrations in Rotating Machines, Vienna, February 23 - 25, 2009
  • Siewert, C.; Panning, L.; Gerber, C.; Masserey, P.-A. (2008): Numerical and Experimental Damping Prediction of a Nonlinearly Coupled Low Pressure Steam Turbine BladingPaper No. GT2008-51073, ASME Turbo Expo 2008: Turbomachinery Technical Conference and Exposition, Berlin, Germany, June 9-13, 2008
    DOI: 10.1115/GT2008-51073
  • Hohl, A.; Siewert, C.; Panning, L., Kayser, A. (2008): Nonlinear Vibration Analysis of Gas Turbine Bladings with Shroud CouplingPaper No. GT2008-50787, ASME Turbo Expo 2008: Turbomachinery Technical Conference and Exposition, Berlin, Germany, June 9-13, 2008
    DOI: 10.1115/GT2008-50787
  • Denkena, B.; Deichmüller, M. ; Kröger, M.; Panning-von Scheidt, L. ; Carstensen, C. ; Kilian, S. (2007): Modeling and Simulation of the Process Machine Interaction During Tool Grinding ProcessesProceedings of the 10th CIRP International Workshop on Modeling of Machining Operations, Reggio Calabria, Italy, August 27-28, 2007
  • Siewert, C.; Panning, L.; Schmidt-Fellner, A.; Kayser, A. (2006): The Estimation of the Contact Stiffness for Directly and Indirectly Coupled Turbine BladingPaper No. GT2006-90473, ASME Turbo Expo 2006: Turbomachinery Technical Conference and Exposition, Barcelona, Spain, May 8-11, 2006
    DOI: 10.1115/GT2006-90473
  • Götting, F.; Sextro, W.; Panning, L.; Popp, K. (2004): Systematic Mistuning of Bladed Disk Assemblies With Friction ContactsPaper No. GT2004-53310, ASME Turbo Expo 2004: Turbomachinery Technical Conference and Exposition, Vienna, Austria, June 14-17, 2004
    DOI: 10.1115/GT2004-53310
  • Panning, L.; Sextro, W.; Popp, K.; Götting, F.; Kayser, A.; Wolter, I. (2004): Asymmetrical Underplatform Dampers in Gas Turbine Bladings: Theory and ApplicationPaper No. GT2004-53316, ASME Turbo Expo 2004: Turbomachinery Technical Conference and Exposition, Vienna, Austria, June 14-17, 2004
    DOI: 10.1115/GT2004-53316
  • Götting, F.; Sextro, W.; Panning, L.; Popp, K. (2003): Schwingungsverhalten von verstimmten Beschaufelungen mit ReibelementenSIRM 2003 - Schwingungen in rotierenden Maschinen 6, Darmstadt, February 26-28, 2003
  • Sextro, W.; Panning, L.; Götting, F.; Popp, K. (2002): Fast Calculation of the Statistics of the Forced Response of Mistuned Bladed Disk Assemblies with Friction ContactsPaper No. GT-2002-30427, ASME Turbo Expo 2002: Turbomachinery Technical Conference and Exposition, Amsterdam, The Netherlands, June 3-6, 2002
    DOI: 10.1115/GT2002-30427
  • Panning, L.; Sextro, W.; Popp, K. (2002): Optimization of the Contact Geometry between Turbine Blades and Underplatform Dampers with Respect to Friction DampingPaper No. GT-2002-30429, ASME Turbo Expo 2002: Turbomachinery Technical Conference and Exposition, Amsterdam, The Netherlands, June 3-6, 2002
    DOI: 10.1115/GT2002-30429
  • Panning, L.; Sextro, W.; Popp, K. (2000): Optimization of Interblade Friction Damper DesignPaper No. 2000-GT-0541, ASME Turbo Expo 2000: Turbomachinery Technical Conference and Exposition, Munich, Germany, May 8-11, 2000
    DOI: 10.1115/2000-GT-0541

Bücher

  • Popp, K.; Schiehlen, W. (unter Mitwirkung von Kröger, M.; Panning, L.) (2010): Ground Vehicle DynamicsSpringer-Verlag Berlin
    DOI: 10.1007/978-3-540-68553-1
    ISBN: 978-3-540-24038-9
  • Panning, L. (2005): Auslegung von Reibelementen zur Schwingungsdämpfung von TurbinenschaufelnDiss., Düsseldorf: VDI-Fortschrittberichte Reihe 11, Nr. 328

Beiträge in Büchern

  • Kleyman, G.; Jahn, M.; Tatzko, S.; Panning-von Scheidt, L. (2023): A Combined Numerical-Experimental Approach for the Damping Evaluation of Non-Linear Dissipative Vibration SystemsEberhard, P. (ed.).: Lecture Notes in Applied and Computational Mechanics, Volume 102: Calm, Smooth and Smart. Novel Approaches for Influencing Vibrations by Means of Deliberately Introduced Dissipation, pp. 285-303
    DOI: 10.1007/978-3-031-36143-2

Konferenz

  • Amer, M.; Schmied, S.; Paehr, M.; Panning-von Scheidt, L.; Seume, J.R. (2022): Optimal Sensor Placement and Model Updating of Axial Compressor Casing ComponentsProceedings of IMAC-XL (40th) 2022: A Conference and Exposition on Structural Dynamics, Feb. 7-10, Orlando, Florida
  • Hoffmann T., Jahn M., Scheidt L.P., Wallaschek J. (2020): Modal Excitation of Circular Rotating Structures Using an Innovative Electromagnetic DeviceMains M., Dilworth B. (eds) Topics in Modal Analysis & Testing, Volume 8. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, Cham
    DOI: 10.1007/978-3-030-12684-1_15
    ISBN: 978-3-030-12684-1
  • Förster, A.; Panning-von Scheidt, L.; Wallaschek, J. (2020): Forced Response of Nonlinear Systems Under Combined Harmonic and Random ExcitationKerschen, Brake et al. (Hg.) 2020 – Nonlinear Structures and Systems
    DOI: 10.1007/978-3-030-12391-8_7
  • Marhenke, N.; Wallaschek, J.; Panning-von Scheidt, L.; Tatzko, S.; Hartung, A.; Schwarz, S. (2020): Numerical investigations of the energy transfer between modes due to multi-resonances of a nonlinear friction-damped modelInternational Conference on Noise and Vibration Engineering (ISMA), Leuven, Belgium, September 7-9, 2020
  • Oettinger, M.; Prohaska, P.; Schwerdt, L.; Panning-von Scheidt, L.; Herbst, F.; Seume, J. (2019): Potenzialstudie eines Verbunds aus entkoppelt betriebenen AeroderivatenBeitrag in: Hurtado, A.; Beckmann, M.; (Hrsg.): Kraftwerkstechnik 2019, SAXONIA
    ISBN: 3934409938
  • Förster, A.; Panning-von Scheidt, L.; Wallaschek, J. (2019): Forced Response of Nonlinear Systems Under Combined Harmonic and Random ExcitationKerschen, Brake et al. (Hg.) 2020 – Nonlinear Structures and Systems
    DOI: 10.1007/978-3-030-12391-8_7
  • Schwerdt, L.; Panning-von Scheidt, L.; Wallaschek, J. (2019): A Priori Interface Reduction for Substructuring of Multistage Bladed DisksDynamic Substructures, Volume 4, Proceedings of the 37th IMAC, a Conference and Exposition on Structural Dynamics 2019, Springer, 13–21
    ISBN: 3030121844
  • Flöter, F.; Pohle, L.; Denkena, B.; Panning-von Scheidt, L.; Wallaschek, J. (2015): Mistuning of Blisks During Milling Process - Manufacturing and RepairDeutsche Gesellschaft für Luft- und Raumfahrt (Hg.): 64. Deutscher Luft- und Raumfahrtkongress (DLRK), Rostock, Germany, September 22-24, 2015
  • Tatzko, S.; Panning-von Scheidt, L.; Wallaschek, J. (2015): Forced response of turbine bladings with alternating mistuning and friction damper couplingEUROMECH Colloquium 573 Coupling and Nonlinear interactions in Rotating Machinery, Lyon, France, August 25-26, 2015
  • Krack, M.; Panning-von Scheidt, L.; Wallaschek, J. (2014): A Framework for the Computational Dynamic Analysis of Coupled Structures Using Nonlinear ModesIn: Kerschen G. (eds) Nonlinear Dynamics, Volume 2: Proceedings of the 32nd IMAC, A Conference and Exposition on Structural Dynamics, Orlando, Florida, USA, February 3-5, 2014
    DOI: 10.1007/978-3-319-04522-1_5
  • Krack, M.; Panning-von Scheidt, L.; Wallaschek, J. (2014): Modal analysis of nonlinear dissipative systems: Application to vibration damping with shape memory materialsProceedings of the 15th Conference on Nonlinear Vibrations, Localization and Energy Transfer, Istanbul, Turkey, July 2-4, 2014
  • Krack, M.; Panning-von Scheidt, L.; Wallaschek, J. (2014): Vibration analysis of structures with contact interfaces using nonlinear modesProceedings of the 11th World Congress on Computational Mechanics, July 20-25, Barcelona, Spain, 2014
  • Hentschel, O.; Panning-von Scheidt, L.; Wallaschek, J.; Denk, M.; Masserey P.-A. (2014): Introduction and Evaluation of an Experimental Setup for Material Damping DeterminationProc. Of ISROMAC-15, The 15th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, February 24 - 28, 2014
  • Tamai, R.; Tanaka, R.; Sato, Y.; Kusterer, K.; Lin, G.; Kemper, M.; Panning-von Scheidt, L. (2013): Vibration Analysis of Shrouded Turbine Blades for a 30 MW Gas TurbinePaper No. TBTS2013-2014, ASME 2013 Turbine Blade Tip Technical Symposium and Course Week (TBTS2013), Hamburg, Germany, September 30–October 3, 2013
    DOI: 10.1115/TBTS2013-2014
  • Bonhage, M.; Herzog, A.; Panning-von Scheidt, L.; Wallaschek, J. (2013): Resonance Passage of Structures with Friction ContactsPaper ID 345-993, 4th Canadian Conference on Nonlinear Solid Mechanics (CanCNSM), Montreal, Canada, July 23-26, 2013
  • Bonhage, M.; Panning-von Scheidt, L.; Wallaschek, J. (2013): Resonance Passage of Cyclic Symmetric StructuresInternational Conference on Vibration Problems (ICOVP-2013), Lissabon, Portugal, September 9-12, 2013
  • Krack, M.; Panning-von Scheidt, L.; Wallaschek, J. (2013): A Method of Modal Analysis and Synthesis for Mechanical Systems with Piecewise-Smooth NonlinearitiesPaper 682, 4th Canadian Conference on Nonlinear Solid Mechanics (CanCNSM), Montreal, Canada, July 23-26, 2013
  • Pohle, L.; Panning-von Scheidt, L.; Wallaschek, J. (2012): Reduced Order Model of Mistuned Bladed Disks Using the Krylov-Subspace Combined with the Craig-Bampton Reduction TechniquePaper No. 18187, Proceedings of the 10th World Congress on Computational Mechanics, Sao Paulo, Brazil, July 8-13, 2012
    DOI: 10.5151/meceng-wccm2012-18187
  • Bartelt, M.; Freund, O.; Seume, J. R.; Panning-von Scheidt, L.; Röhle, I.; Buske, C. (2012): Aeroakustik & Aeroelastik der Strömungsmaschinen - Eine Vorlesung als Reaktion auf aktuelle Herausforderungen in der TurbomaschinenentwicklungDAGA 2012, 38. Jahrestagung für Akustik, Darmstadt, March 19-22, 2012
  • Laborenz, J.; Panning, L.; Wallaschek, J.; Denk, M.; Masserey, P.-A. (2012): Experimental Analysis of an Eddy Current Damping Devce Applied to a Rotating Integrally Bladed DiskProc. Of ISROMAC-14 The 14th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, February 27 - March 2, 2012
  • Schurzig, D.; Panning-von Scheidt, L.; Hartung, A.; Wallaschek, J. (2012): Nonlinear harmonic analysis of structures containing joints with impacts and frictionPaper No. 18336, Proceedings of the 10th World Congress on Computational Mechanics, Sao Paulo, Brazil, July 8-13, 2012
    DOI: 10.5151/meceng-wccm2012-18336
  • Hohl, A.; Panning, L. (2011): Analysis of the Frequency Response of Mistuned Multi-Stage Bladed DisksPaper No. 11-4, ICEAF II, 2nd International Conference of Engineering against Fracture, Mykonos, Greece, June 22-24, 2011
  • Hohl, A.; Panning, L.; Wallaschek, J. (2010): Analysis of the Influence of Blade Pattern Characteristics on the Forced Response of Mistuned Blisks with a Cyclic CMS-Based Substructure ModelPaper No. ESDA2010-25294, Proceedings of the ASME 2010 10th Biennial Conference on Engineering Systems and Design Analysis (ESDA 2010), Istanbul, Turkey, July 12-14, 2010
    DOI: 10.1115/ESDA2010-25294
  • Hohl, A.; Neubauer, M.; Panning, L.; Wallaschek, J. (2009): Modelling of Shunted Piezoceramic Actuators with Substructure Techniques and Application to a Bladed Disk ModelIEEE/ASME International Conference on Advanced Intelligent Mechatronics, Singapore, July 14-17, 2009
  • Hohl, A.; Neubauer, M.; Schwarzendahl, S. M.; Panning, L.; Wallaschek, J. (2009): Active and Semiactive Vibration Damping of Turbine Blades with PiezoceramicsProc. SPIE Smart Structures/NDE 2009, San Diego, March 8-12, 2009
  • Siewert, C.; Krack, M.; Panning, L.; Wallaschek, J. (2008): The Nonlinear Analysis of the Multiharmonic Forced Response of Coupled Turbine BladingProc. Of ISROMAC-12, The 12th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, February 27th - March 2, 2012
  • Henke, M.; Guendogdu, Y.; Seume, J.; Siewert, C.; Panning, L.; Wallaschek, J. (2008): Unidirectional Coupled Aerodynamic and Structural Mechanic Analysis of a Turbine BladingProc. of IMechE 9th Int. Conf. on Vibrations in Rotating Machinery, Exeter, S. 171-184
  • Panning, L.; Kröger, M.; Wallaschek, J. (2007): Schwingungsdämpfung durch Reibung: Theorie, Experiment, AnwendungenVDI-Tagung Schwingungsdämpfung (VDI-Berichte 2003), Wiesloch, October 16-17, 2007
  • Romberg, O.; Tausche, M.; Pereira, C.; Panning, L. (2007): Passive Damping of Spacecraft Sandwich Panels10th European Conference on Spacecraft Structures, Materials & Mechanical Testing, Berlin, September 10-13, 2007
  • Genzo, A.; Sextro, W.; Panning, L. (2007): Schwingungsverhalten elastischer Körper mit nichtlinearen Kopplungen in ausgedehnten ReibkontaktenVDI-Tagung Nichtlineare Schwingungen - Reibung und Kontaktmechanik (VDI-Berichte 2022), Kassel, Germany, November 13-14, 2007
  • Schedlinski, C.; Genzo, A.; Läer, B.; Panning, L. (2006): Modeling of Assembled Combustion Engine Parts under Consideration of Micro Slip Effects in the Connection FlangesProc. of the 12th International Conference on Noise and Vibration Engineering (ISMA), Leuven, Belgium, September 18-20, 2006
  • Genzo, A.; Sextro, W.; Panning, L.: (2006): Dynamic Behaviour of Elastic Bodies Coupled by Extended Friction ContactsProc. of the 12th International Conference on Noise and Vibration Engineering (ISMA), Leuven, Belgiuem, September 18-20, 2006
  • Panning, L.; Sextro, W.; Popp, K. (2002): Spatial Dynamics of Tuned and Mistuned Bladed Disk Assemblies with Cylindrical and Wedge Shaped Friction DampersPaper No. DD-028, Proc. of ISROMAC-9, The 9th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, USA, February 10-14, 2002
  • Panning, L.; Sextro, W.; Popp, K. (2001): Schwingungsanalyse verstimmter Schaufelkränzemit Reibelementen, WienTagungsband Schwingungen in rotierenden Maschinen V. Wien, February 26-28, 2001
  • A. Bode, A.; Panning, L.; Schröder, J.J. (1998): Growth and Collapse of Vapor Bubbles in Subcooled Boiling near the Region of Alternating Boiling Modes, Kyongju, Korea11th Int. Heat Transfer Conf. 2, Kyongju, Korea, August 23-28, 1998

Zeitschrift

  • Jahn, M.; Panning-von Scheidt, L.; Wallaschek, J. (2019): Parameter on Nonlinear Energy Sink attached to Multiple Degree of Freedom SystemPAMM Proceedings in Applied Mathematics and Mechanics, Vol. 19, No. 1, 2019
    DOI: 10.1002/pamm.201900272
  • Bonhage, M.; Hentschel; O. P.; Panning-v. Scheidt, L.; Wallaschek, J. (2015): Transient amplification of maximum vibration amplitudesProc. Appl. Math. Mech., 15: 47-48
    DOI: 10.1002/pamm.201510014
  • Kaptan, K.; Panning‐von Scheidt, L.; Wallaschek, J. (2015): The Vibrational Behavior of Coupled Bladed Disks with Variable Rotational SpeedProc. Appl. Math. Mech., 15: 255–256
    DOI: 10.1002/pamm.201510118
  • Hentschel, O. P.; Bonhage, M.; Panning‐von Scheidt, L.; Wallaschek, J. (2015): Evaluation of a Finite Element Approach for Damping DeterminationProc. Appl. Math. Mech., 15: 201–202
    DOI: 10.1002/pamm.201510091
  • Pohle, L.; Panning‐von Scheidt, P.; Wallaschek. J. (2015): Harmonic Mistuning of Blisks Proc. Appl. Math. Mech., 15: 641-642
    DOI: 10.1002/pamm.201510310
  • Herzog, A.; Panning-von Scheidt, L. (2010): Nonlinear Vibrations with Friction: A Multiharmonic ApproachProc. Appl. Math. Mech., 10: 245–246
    DOI: 10.1002/pamm.201010115
  • Laborenz, J.; Siewert, C.; Panning, L.; Wallaschek, J.; Gerber, C. (2009): Mechanical model of a mistuned 2DOF-structure coupled by viscous dampingProc. Appl. Math. Mech., 9: 237–238
    DOI: 10.1002/pamm.200910092
  • Hohl, A.; Panning, L.; Siewert, C.; Bürge, A. (2007): The Vibrational Behaviour of Bladed Disks with Multiple Coupling DevicesProc. Appl. Math. Mech., 7: 4040037–4040038
    DOI: 10.1002/pamm.200700724
  • Siewert, C.; Panning, L.; Hohl, A.; Bürge, A.; Gerber, C. (2007): Damping of Structural Vibrations using an Electromotive Eddy Current DamperProc. Appl. Math. Mech., 7: 4040039–4040040
    DOI: 10.1002/pamm.200700739
  • Panning, L.; Kröger, M. (2007): Modellierung der Schwingungen beim WerkzeugschleifenProc. Appl. Math. Mech., 7: 4050029–4050030
    DOI: 10.1002/pamm.200700845
  • Denkena, B.; Neuber, C.-C. ; Kallage, F. ; Panning, L. (2006): Aufbau und Regelung einer Magnetführung für WerkzeugmaschinenProc. Appl. Math. Mech., 6: 801–802
    DOI: 10.1002/pamm.200610380
  • Schmidt-Fellner, A.; Siewert, C.; Panning, L. (2006): Experimental Analysis of Shrouded Blades with Friction ContactProc. Appl. Math. Mech., 6: 263–264
    DOI: 10.1002/pamm.200610112
  • Panning, L. (2006): Symmetric and Asymmetric Underplatform Dampers for Turbine BladesProc. Appl. Math. Mech., 6: 251–252
    DOI: 10.1002/pamm.200610106
  • Siewert; C., Panning, L.; Popp, K. (2005): The Vibrational Behavior of Bladed Disks in Consideration of Friction Damping and Contact ElasticityProc. Appl. Math. Mech., 5: 131–132
    DOI: 10.1002/pamm.200510046
  • Panning, L.; Sextro, W.; Popp, K. (2003): Design of Friction Dampers for Mistuned Bladed DisksProc. Appl. Math. Mech. 3, 118–119
    DOI: 10.1002/pamm.200310336
  • Panning, L.; Sextro, W.; Popp, K. (2001): Vibrational Behaviour of Turbine Blade Assemblies with Friction DampersZeitschrift für angewandte Math. Mech. 81, 207-208, Berlin

Patentschriften

  • Hoffmann, T.; Jahn, M.; Panning-von Scheidt, L. (2018): Elektromagnetischer Schwingungsanreger zur Schwingungsanregung der Schaufeln eines SchaufelkranzesPatent DE 10 2017 114 153 A1 2018.12.27, Offenlegungsschrift vom 27.12.2018
  • Szwedowicz, J.; Kappis, W.; Panning, L.; Schwarzendahl, S.M.; Neubauer, M.; Hohl, A.; Wallaschek, J. (2011): Verfahren zum Dämpfen von während des Betriebes auftretenden mechanischen Schwingungen in einer Turbomaschinenschaufel, Turbomaschinenschaufel zur Durchführung des Verfahrens sowie piezoelektrisches Dämpfungselement zum Einbau in eine solche TurbomaschinenschaufelEuropäische Patentanmeldung EP 2 458 150 A1, 04.11.2011