Zeitschrift (reviewed)
-
(2024): Experimental and Numerical Analysis of Rotational Speed Influence on the Nonlinear Dynamics of Turbine Blades with Shroud Coupling, International Journal of Gas Turbine, Propulsion and Power Systems, 2024, Volume 15, Issue 2, Pages 17-26
DOI: https://doi.org/10.38036/jgpp.15.2_17 -
(2024): Application of Interface Reduction Methods to Rotordynamic Casing Models, ASME. J. Eng. Gas Turbines Power
DOI: https://doi.org/10.1115/1.4066606 -
(2023): Transient resonance passage of a mistuned bladed disk with and without underplatform dampers, International Journal of Turbomachinery, Propulsion and Power, 2023, 8(4), 38.
DOI: 10.3390/ijtpp8040038 -
(2022): Determining the Influence of Casing Vibrational Behaviour On Rotordynamics., ASME. J. Eng. Gas Turbines Power 144(5): 051012
DOI: 10.1115/1.4053123 -
(2022): Reduced Order Modeling of Forced Response in a Multistage Compressor Under Mistuning and Aerocoupling, ASME. J. Eng. Gas Turbines Power 144(11): 111017
DOI: https://doi.org/10.1115/1.4055368 -
(2021): Key Features of the Transient Amplification of Mistuned Systems, ASME. J. Eng. Gas Turbines Power. March 2021; 143(3): 031016.
DOI: 10.1115/1.4049501 -
(2021): Single Nodal Diameter Excitation of Turbine Blades: Experimental and Theoretical Study., ASME. J. Eng. Gas Turbines Power. September 2021; 143(9): 091028.
DOI: https://doi.org/10.1115/1.4051172 -
(2020): Equivalent Linearization of Bladed Disk Assemblies with Friction Nonlinearities Under Random Excitation, Journal of Engineering for Gas Turbines and Power
DOI: 10.1115/1.4048407 -
(2020): Global detection of detached periodic solution branches of friction-damped mechanical systems., Nonlinear Dynamics. 99(2).
DOI: 10.1007/s11071-019-05425-4 -
(2020): A Model Order Reduction Method for Bladed Disks with Large Geometric Mistuning using a Partially Reduced Intermediate System Model, J. Eng. Gas Turbines Power
DOI: 10.1115/1.4049357 -
(2019): Analysis of Contacts in Friction Damped Turbine Blades using Dimensionless Numbers, J. Eng. Gas Turbines Power. Dec 2019, 141(12): 121023 (7 pages)
DOI: 10.1115/1.4044481 -
(2019): Measured and Simulated Forced Response of a Rotating Turbine Disk with Asymmetric and Cylindrical Underplatform Dampers, Journal of Engineering for Gas Turbines and Power
DOI: 10.1115/1.4045337 -
(2019): Comparison of different harmonic balance based methodologies for computation of nonlinear modes of non-conservative mechanical systems, Mech. Syst. Signal Process. 127 (2019), 159-171
DOI: 10.1016/j.ymssp.2019.03.005 -
(2019): Reduced-Order Modeling of Bladed Disks Considering Small Mistuning the Disk Sectors, J. Eng. Gas Turbines Power. May 2019, 141(5): 052502 (7 pages)
DOI: 10.1115/1.4041071 -
(2019): Discussion of “Dynamic Modeling and Projection-Based Reduction Methods for Bladed Disks with Nonlinear Frictional and Intermittent Contact Interfaces” (Mitra, M., Epureanu, B. I., 2018, ASME Appl. Mech. Rev., 71(5), p. 050803)., ASME. Appl. Mech. Rev. September 2019; 71(5): 055502.
DOI: 10.1115/1.4044933 -
(2018): Transient amplitude amplification of mistuned structures: An experimental validation, J. Sound and Vibration 436 (2018) 236–252
DOI: 10.1016/j.jsv.2018.07.031 -
(2018): Approximate Solution of the Fokker–Planck Equation for a Multidegree of Freedom Frictionally Damped Bladed Disk Under Random Excitation, J. Eng. Gas Turbines Power. 2018; 141(1):011004-011004-8, Paper No: GTP-18-1279
DOI: 10.1115/1.4040740 -
(2018): Rig and Engine Validation of the Nonlinear Forced Response Analysis Performed by the Tool OrAgL, J. Eng. Gas Turbines Power. 2018; 141(1):011004-011004-8, Paper No: GTP-18-1279
DOI: 10.1115/1.4041160 -
(2018): Rotational Speed-Dependent Contact Formulation for Nonlinear Blade Dynamics Prediction, J. Eng. Gas Turbines Power. 2018; 141(4):042503-042503-11
DOI: 10.1115/1.4040843 -
(2018): Influence of Geometric Design Parameters onto Vibratory Response and HCF Safety for Turbine Blades with Friction Damper, J. Eng. Gas Turbines Power. 2018; 141(4):041022-041022-10
DOI: 10.1115/1.4040732 -
(2018): Combined Airfoil and Snubber Design Optimization of Turbine Blades With Respect to Friction Damping, J. Turbomach. 2018; 140(8):081007-081007-11, TURBO-18-1048
DOI: 10.1115/1.4040679 -
(2018): Intentional Response Reduction by Harmonic Mistuning of Bladed Disks with Aerodynamic Damping, J. Eng. Gas Turbines Power. 2018;140(12):121010-121010-10
DOI: 10.1115/1.4040898 -
(2017): A Taylor Series Expansion Approach for Nonlinear Blade Forced Response Prediction Considering Variable Rotational Speed, J. Eng. Gas Turbines Power 139(6), 062503
DOI: 10.1115/1.4035286 -
(2017): High Order Sensitivity Analysis of a Mistuned Blisk Including Intentional Mistuning, J. of Theoretical and Applied Mechanics 55, 1, 353-368
DOI: 10.15632/jtam-pl.55.1.353 -
(2017): Reduced Order Modeling of Mistuned Bladed Disks under Rotation, Technische Mechanik, 37, 2-5, (2017), S. 314 – 325
DOI: https://doi.org/10.24352/UB.OVGU-2017-107 -
(2016): An efficient method for approximating resonance curves of weakly-damped nonlinear mechanical systems, Computers & Structures, 169. Jg., S. 81-90
DOI: 10.1016/j.compstruc.2016.03.003 -
(2016): Analysis of an experimental setup for structural damping identification, Journal of Theoretical and Applied Mechanics 54, 1, 27-39
DOI: 10.15632/jtam-pl.54.1.27 -
(2016): On the Interaction of Multiple Traveling Wave Modes in the Flutter Vibrations of Friction-Damped Tuned Bladed Disks, J. Eng. Gas Turbines Power 139(4), 042501
DOI: 10.1115/1.4034650 -
(2015): Transient Amplitude Amplification of Mistuned Blisks, J. Eng. Gas Turbines Power 137, 112502-1
DOI: 10.1115/1.4030278 -
(2015): Introduction and Evaluation of a Damping Determination Method Based on the Short-Term Fourier Transform and Resampling (STFR), Journal of Theoretical and Applied Mechanics 53, 2, 395-407
DOI: 10.15632/jtam-pl.53.2.395 -
(2014): On the Computation of the Slow Dynamics of Nonlinear Modes of Mechanical Systems, Mechanical Systems and Signal Processing 42 (1-2), 71-87
DOI: 10.1016/j.ymssp.2013.08.031 -
(2014): Reliability Optimization of Friction-Damped Systems Using Nonlinear Modes, Journal of Sound and Vibration 333, 2699–2712
DOI: 10.1016/j.jsv.2014.02.008 -
(2013): A High-Order Harmonic Balance Method for Systems with Distinct States, Journal of Sound and Vibration 332 (21): 5476-5488
DOI: 10.1016/j.jsv.2013.04.048 -
(2013): A Method for Nonlinear Modal Analysis and Synthesis: Application to Harmonically Forced and Self-Excited Mechanical Systems, Journal of Sound and Vibration 332 (25): 6798–6814
DOI: 10.1016/j.jsv.2013.08.009 -
(2013): Reduced Order Modeling Based on Complex Nonlinear Modal Analysis and its Application to Bladed Disks with Shroud Contact, J. Eng. Gas Turbines Power 135 (10), 102502–102509
DOI: 10.1115/1.4025002 -
(2012): Eddy Current Damper for Turbine Blading: Electromagnetic Finite Element Analysis and Measurement Results, J. Eng. Gas Turbines Power 134, 042504
DOI: 10.1115/1.4004734 -
(2010): Eddy Current Damping - A Concept Study For Steam Turbine Blading, J. Eng. Gas Turbines Power 132(5), 052505-1-052505-7
DOI: 10.1115/1.3205032 -
(2010): Multiharmonic Forced Response Analysis of a Turbine Blading Coupled by Nonlinear Contact Forces, J. Eng. Gas Turbines Power 132(8), 082501-1-082501-9
DOI: 10.1115/1.4000266 -
(2003): Spatial Dynamics of Tuned and Mistuned Bladed Disks with Cylindrical and Wedge Shaped Friction Dampers, Int J. of Rotating Machinery (9)3, 219-228
DOI: 10.1155/S1023621X03000198 -
(2003): Vibration Damping by Friction Forces - Theory and Applications, J. Vibration and Control (9)3-4, 419-448
DOI: 10.1177/107754603030780
Konferenz (reviewed)
-
(2024): Application of Interface Reduction Methods to Rotordynamic Casing Models., Paper GT2024-121370, Proceedings of the ASME 2024 Turbo Expo Conference (2024); ASME Turbo Expo: Turbomachinery Technical Conference & Exhibition, London, UK, June 2024.
-
(2023): Transient resonance passage of a mistuned bladed disk with and without underplatform dampers, Proceedings of 15th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics (ETC15), Budapest, April 24-28, 2023.
-
(2023): Geometrically Mistuned Blisks: Strain Gauge and Tip Timing Vibration Measurements of Rotating Blades with and Without Underplatform Dampers, Rinderknecht, S.; Schüßler, B.; Schwarz, S. (Hrsg.) (2023): Proceedings of SIRM 2023 - The 15th European Conference on Rotordynamics. Darmstadt, Germany, 22.-24.02.2023
DOI: 10.26083/tuprints-00024057 -
(2023): Experimental and Numerical Analysis of Rotational Speed Influence on the Nonlinear Dynamics of Turbine Blades with Shroud Coupling, Proceedings of the International Gas Turbine Congress 2023, November 26 - Dezember 1, Kyoto, Japan, 2023
-
(2023): Investigations on Laterally Coupled Rotor‐Blade‐Vibrations, In: Rinderknecht, S.; Schüßler, B.; Schwarz, S. (Hrsg.) (2023): Proceedings of SIRM 2023 - The 15th European Conference on Rotordynamics. Darmstadt, Germany, 22.-24.02.2023
DOI: 10.26083/tuprints-00024057 -
(2023): Geometrically Mistuned Blisks: Assessment of Geometric Uncertainties and Finite‐Element Mesh Morphing, Rinderknecht, S.; Schüßler, B.; Schwarz, S. (Hrsg.) (2023): Proceedings of SIRM 2023 - The 15th European Conference on Rotordynamics. Darmstadt, Germany, 22.-24.02.2023
DOI: 10.26083/tuprints-00024057 -
(2022): Interface Reduction in an Equivalent Linearization Algorithm for Nonlinearly Coupled Systems Under Random Excitation, ASME 2022 Turbo Expo
DOI: 10.1115/GT2022-78367 -
(2022): Reduced Order Modeling of Forced Response in a Multistage Compressor Under Mistuning and Aerocoupling, ASME paper GT2022-81090, Int. Gas Turbine & Aeroeng. Congress and Exh., Rotterdam, 2022, pp. 1-12
DOI: http://dx.doi.org/10.1115/GT2022-81090 -
(2022): An Improved Reduced Order Model for Bladed Disks Including Multistage Aeroelastic and Structural Coupling, Proceedings of Global Power and Propulsion Society GPPS Chania22, 18th–20th September, 2022.
DOI: 10.33737/gpps22-tc-106 -
(2021): Determining the influence of casing vibrational behaviour on rotordynamics, Paper ID-021, SIRM 14th International Conference on Dynamics of Rotating Machines, Gdańsk, Poland, 17th –19th February, 2021
-
(2021): Calculation of Nonlinear Systems under Narrow Band Excitation Using Equivalent Linearization and Path Continuation, ASME paper GT2021-58437, Int. Gas Turbine & Aeroeng. Congress and Exh., virtual
DOI: 10.1115/GT2021-58437 -
(2021): Development of a Multi-Shaker-Control to Investigate the Influence of the Interblade Phase Angle on Frictionally Damped Turbine Blades, ASME paper GT2021-59272, Int. Gas Turbine & Aeroeng. Congress and Exh., virtual
DOI: https://doi.org/10.1115/GT2021-59272 -
(2020): Identification of the essential features of the transient amplification of mistuned systems., Paper GT2020-15693, Proceedings of the ASME 2020 Turbo Expo Conference (2020); ASME Turbo Expo: Turbomachinery Technical Conference & Exhibition, London, UK, September 2020
DOI: https://doi.org/10.1115/GT2020-15693 -
(2020): Equivalent Linearization of Bladed Disk Assemblies with Friction Nonlinearities Under Random Excitation, ASME 2020 Turbo Expo
DOI: 10.1115/GT2020-14264 -
(2020): Single Nodal Diameter Excitation of Turbine Blades: Experimental and Theoretical Study, Paper GT2020-14282, Proceedings of the ASME 2020 Turbo Expo Conference (2020); ASME Turbo Expo: Turbomachinery Technical Conference & Exhibition, London, UK, September 2020
DOI: https://doi.org/10.1115/GT2020-14282
ISBN: 978-0-7918-8423-2 -
(2020): A Model Order Reduction Method for Bladed Disks with Large Geometric Mistuning using a Partially Reduced Intermediate System Model, Paper GT2020-14199, Proceedings of the ASME 2020 Turbo Expo Conference (2020); ASME Turbo Expo: Turbomachinery Technical Conference & Exhibition, London, UK, September 2020
-
(2019): Probabilistic Study of Blend Repairs on an Axial Compressor Blisk using the Subset of Nominal Modes Method, Proc. IGTC Int. Gas Turbine Congress, Tokyo, 2019
-
(2018): Approximate Solution of the Fokker–Planck Equation for a Multidegree of Freedom Frictionally Damped Bladed Disk Under Random, ASME paper GT2018-75755, Int. Gas Turbine & Aeroeng. Congress and Exh., Oslo, 2018
-
(2018): Rig and Engine Validation of the Nonlinear Forced Response Analysis Performed by the Tool OrAgL, ASME paper GT2018-75186, Int. Gas Turbine & Aeroeng. Congress and Exh., Oslo, 2018
-
(2018): Rotational Speed-Dependent Contact Formulation for Nonlinear Blade Dynamics Prediction, ASME paper GT2018-75290, Int. Gas Turbine & Aeroeng. Congress and Exh., Oslo, 2018
-
(2018): Influence of Geometric Design Parameters onto Vibratory Response and HCF Safety for Turbine Blades with Friction Damper, ASME paper GT2018-75363, Int. Gas Turbine & Aeroeng. Congress and Exh., Oslo, 2018
-
(2018): Numerical and Experimental Study of Shrouded Blade Dynamics Considering Variable Operating Points, ASME paper GT2018-76692, Int. Gas Turbine & Aeroeng. Congress and Exh., Oslo, 2018
-
(2018): Investigations on Transient Amplitude Amplification by Applying Intentional Mistuning, ASME paper GT2018-75514, Int. Gas Turbine & Aeroeng. Congress and Exh., Oslo, 2018
-
(2018): Reduced-Order Modeling of Bladed Disks Considering Small Mistuning the Disk Sectors, Proceedings of the ASME Turbo Expo: Turbomachinery Technical Conference and Exposition, 2018
DOI: 10.1115/GT2018-76610 -
(2018): Intentional Response Reduction by Harmonic Mistuning of Bladed Disks with Aerodynamic Damping, ASME paper GT2018-76601, Int. Gas Turbine & Aeroeng. Congress and Exh., Oslo, 2018
-
(2017): Nodal diameter-dependent modal damping method for nonlinear blade dynamics prediction considering variable rotational speed, Proceedings of ASME Turbo Expo 2017, 26-30 June, Charlotte, NC, USA
-
(2017): Modelling friction characteristics in turbine blade vibrations using a Fourier series expansion of a real friction hysteresis. , X International Conference on Structural Dynamics, EURODYN 2017, Rome, Italy, Procedia Engineering 199 (2017) 669–674, 2017
DOI: 10.1016/j.proeng.2017.09.586 -
(2017): Aerodynamical and Structural Analysis of Operationally Used Turbine Blades, In: Procedia CIRP 59, 77–82
DOI: 10.1016/j.procir.2016.09.023 -
(2017): Influence of Blade Repairs on Compressor Blisk Vibration considering Aerodynamic Damping and Mistuning, Proceedings of Shanghai 2017 Global Power and Propulsion Forum, GPPS-2017-0142
-
(2017): Reduced Order Modeling of Mistuned Bladed Disks Considering Aerodynamic Coupling and Mode Family Interaction, 12th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics (ETC12), Stockholm, April 3-7, 2017
-
(2017): Reduced Order Modeling of Mistuned Bladed Disks Under Rotation, 12th International Conference on Vibrations in Rotating Machines (SIRM 2017), Graz, Austria, February 15-17, 2017
-
(2016): A Taylor Series Expansion Approach for Nonlinear Blade Forced Response Prediction Considering Variable Rotational Speed, Paper No. GT2016-56375, ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition, Seoul, South Korea, June 13–17, 2016
DOI: 10.1115/GT2016-56375 -
(2016): On the Interaction of Multiple Traveling Wave Modes in the Flutter Vibrations of Friction-Damped Tuned Bladed Disks, Paper No. GT2016-56126, ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition, Seoul, South Korea, June 13–17, 2016
DOI: 10.1115/GT2016-56126 -
(2016): Fast Multidisciplinary Design Optimization in the Development of Mechatronic Systems, Proceedings of ASME 2016 International Mechanical Engineering Congress and Exposition. November 11, Phoenix, USA
DOI: 10.1115/IMECE2016-65599 -
(2014): Influential Parameters on Structural Damping Values of Turbine Blades, Paper No. GT2014-25656, ASME Turbo Expo 2014: Turbomachinery Technical Conference and Exposition, Düsseldorf, Germany, June 16-20, 2014
DOI: 10.1115/GT2014-25656 -
(2014): Comparison of two Widely-Used Frequency-Time Domain Contact Models for the Vibration Simulation of Shrouded Turbine Blades, Paper No. GT2014-26226, ASME Turbo Expo 2014: Turbomachinery Technical Conference and Exposition, Düsseldorf, Germany, June 16-20, 2014
DOI: 10.1115/GT2014-26226 -
(2014): Dynamic Behavior of a Mistuned Air Turbine: Comparison Between Simulations and Measurements, Paper No. GT2014-26025, ASME Turbo Expo 2014: Turbomachinery Technical Conference and Exposition, Düsseldorf, Germany, June 16-20, 2014
DOI: 10.1115/GT2014-26025 -
(2014): Dynamics of Bladed Disks with Frictional Coupling and Alternate Mistuning Pattern, Paper No. IMECE2014-38263, Proceedings of the ASME 2014 International Mechanical Engineering Congress and Exposition (IMECE), November 14-20, 2014, Montreal, Canada
DOI: 10.1115/IMECE2014-38263 -
(2013): Regeneration-Induced Forced Response in Axial Turbines, Paper No. GT2013-95431, ASME Turbo Expo 2013: Turbomachinery Technical Conference and Exposition, San Antonio, Texas, June 3-6, 2013
DOI: 10.1115/GT2013-95431 -
(2013): Reduced Order Modeling Based on Complex Nonlinear Modal Analysis and its Application to Bladed Disks With Shroud Contact, Paper No. GT2013-94560, ASME Turbo Expo 2013: Turbomachinery Technical Conference and Exposition, San Antonio, Texas, June 3-6, 2013
DOI: 10.1115/GT2013-94560 -
(2013): Analysis and Robust Design of Friction Joints for Vibration Reduction in Bladed Disks, SIRM 2013- 10th International Conference on Vibrations in Rotating Machines, Berlin, February 25 - 27, 2013
-
(2013): Investigation of Alternate Mistuned Turbine Blades Non-Linear Coupled by Underplatform Dampers, Paper No. GT2013-95681, ASME Turbo Expo 2013: Turbomachinery Technical Conference and Exposition, San Antonio, Texas, June 3-6, 2013
DOI: 10.1115/GT2013-95681 -
(2012): Transient Resonance Passage with Respect to Friction, Paper No. GT2012-68986, ASME Turbo Expo 2012: Turbomachinery Technical Conference and Exposition, Copenhagen, Denmark, June 11-15, 2012
DOI: 10.1115/GT2012-68986 -
(2012): Multiharmonic Analysis and Design of Shroud Friction Joints of Bladed Disks Subject to Microslip, Paper No. DETC/CIE2012-70184, Proceedings of ASME 2012 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE, Chicago, USA, August 12-15, 2012
DOI: 10.1115/DETC2012-70184 -
(2012): Robust Design of Friction Interfaces of Bladed Disks with Respect to Parameter Uncertainties, Paper No. GT2012-68578, ASME Turbo Expo 2012: Turbomachinery Technical Conference and Exposition, Copenhagen, Denmark, June 11-15, 2012
DOI: 10.1115/GT2012-68578 -
(2012): Modeling Contact Dynamics of Vanes with Adjustable Upstream Flow Angles, Paper No. GT2012-68185, ASME Turbo Expo 2012: Turbomachinery Technical Conference and Exposition, Copenhagen, Denmark, June 11-15, 2012
DOI: 10.1115/GT2012-68185 -
(2012): On Blade Damping Technology Using Passive Piezo Dampers, Paper No. GT2012-68600, ASME Turbo Expo 2012: Turbomachinery Technical Conference and Exposition, Copenhagen, Denmark, June 11-15, 2012
DOI: 10.1115/GT2012-68600 -
(2012): Alternate Mistuning of Turbine Bladings Coupled by Underplatform Dampers, Paper No. IDETC/CIE2012-70863, Proceedings of ASME 2012 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE, Chicago, USA, August 12-15, 2012
DOI: 10.1115/DETC2012-70863 -
(2011): The Influence of Blade Properties on the Forced Response of Mistuned Bladed Disks, Paper No. GT2011-46826, ASME Turbo Expo 2011: Turbomachinery Technical Conference and Exposition, Vancouver, Canada, June 6-10, 2011
DOI: 10.1115/GT2011-46826 -
(2011): Eddy Current Damper for Turbine Blading: Electromagnetic Finite Element Analysis and Measurement Results, Paper No. GT2011-45242, ASME Turbo Expo 2011: Turbomachinery Technical Conference and Exposition, Vancouver, Canada, June 6-10, 2011
DOI: 10.1115/GT2011-45242 -
(2009): A Substructure Based Reduced Order Model for Mistuned Bladed Disks, Paper No. DETC2009-87459, Proceedings of ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2009), San Diego, USA, August 30-September 2, 2009
DOI: 10.1115/DETC2009-87459 -
(2009): Eddy Current Damping: A Concept Study for Steam Turbine Blading, Paper No. GT2009-59593, ASME Turbo Expo 2009: Turbomachinery Technical Conference and Exposition, Orlando, Florida, June 8-12, 2009
DOI: 10.1115/GT2009-59593 -
(2009): Nonlinear Multiharmonic Vibrations of Coupled Turbine Bladings, SIRM 2009 - 8th International Conference on Vibrations in Rotating Machines, Vienna, February 23 - 25, 2009
-
(2009): Multiharmonic Forced Response Analysis of a Turbine Blading Coupled by Nonlinear Contact Forces, Paper No. GT2009-59201, ASME Turbo Expo 2009: Turbomachinery Technical Conference and Exposition, Orlando, Florida, June 8-12, 2009
DOI: 10.1115/GT2009-59201 -
(2008): Nonlinear Vibration Analysis of Gas Turbine Bladings with Shroud Coupling, Paper No. GT2008-50787, ASME Turbo Expo 2008: Turbomachinery Technical Conference and Exposition, Berlin, Germany, June 9-13, 2008
DOI: 10.1115/GT2008-50787 -
(2008): Numerical and Experimental Damping Prediction of a Nonlinearly Coupled Low Pressure Steam Turbine Blading, Paper No. GT2008-51073, ASME Turbo Expo 2008: Turbomachinery Technical Conference and Exposition, Berlin, Germany, June 9-13, 2008
DOI: 10.1115/GT2008-51073 -
(2007): Modeling and Simulation of the Process Machine Interaction During Tool Grinding Processes, Proceedings of the 10th CIRP International Workshop on Modeling of Machining Operations, Reggio Calabria, Italy, August 27-28, 2007
-
(2006): The Estimation of the Contact Stiffness for Directly and Indirectly Coupled Turbine Blading, Paper No. GT2006-90473, ASME Turbo Expo 2006: Turbomachinery Technical Conference and Exposition, Barcelona, Spain, May 8-11, 2006
DOI: 10.1115/GT2006-90473 -
(2004): Systematic Mistuning of Bladed Disk Assemblies With Friction Contacts, Paper No. GT2004-53310, ASME Turbo Expo 2004: Turbomachinery Technical Conference and Exposition, Vienna, Austria, June 14-17, 2004
DOI: 10.1115/GT2004-53310 -
(2004): Asymmetrical Underplatform Dampers in Gas Turbine Bladings: Theory and Application, Paper No. GT2004-53316, ASME Turbo Expo 2004: Turbomachinery Technical Conference and Exposition, Vienna, Austria, June 14-17, 2004
DOI: 10.1115/GT2004-53316 -
(2003): Schwingungsverhalten von verstimmten Beschaufelungen mit Reibelementen, SIRM 2003 - Schwingungen in rotierenden Maschinen 6, Darmstadt, February 26-28, 2003
-
(2002): Optimization of the Contact Geometry between Turbine Blades and Underplatform Dampers with Respect to Friction Damping, Paper No. GT-2002-30429, ASME Turbo Expo 2002: Turbomachinery Technical Conference and Exposition, Amsterdam, The Netherlands, June 3-6, 2002
DOI: 10.1115/GT2002-30429 -
(2002): Fast Calculation of the Statistics of the Forced Response of Mistuned Bladed Disk Assemblies with Friction Contacts, Paper No. GT-2002-30427, ASME Turbo Expo 2002: Turbomachinery Technical Conference and Exposition, Amsterdam, The Netherlands, June 3-6, 2002
DOI: 10.1115/GT2002-30427 -
(2000): Optimization of Interblade Friction Damper Design, Paper No. 2000-GT-0541, ASME Turbo Expo 2000: Turbomachinery Technical Conference and Exposition, Munich, Germany, May 8-11, 2000
DOI: 10.1115/2000-GT-0541
Bücher
-
(2010): Ground Vehicle Dynamics, Springer-Verlag Berlin
DOI: 10.1007/978-3-540-68553-1
ISBN: 978-3-540-24038-9 -
(2005): Auslegung von Reibelementen zur Schwingungsdämpfung von Turbinenschaufeln, Diss., Düsseldorf: VDI-Fortschrittberichte Reihe 11, Nr. 328
Beiträge in Büchern
-
(2023): A Combined Numerical-Experimental Approach for the Damping Evaluation of Non-Linear Dissipative Vibration Systems, Eberhard, P. (ed.).: Lecture Notes in Applied and Computational Mechanics, Volume 102: Calm, Smooth and Smart. Novel Approaches for Influencing Vibrations by Means of Deliberately Introduced Dissipation, pp. 285-303
DOI: 10.1007/978-3-031-36143-2
Vortrag
-
(2018): Convenient Choice of Friction Test Parameters for Simulation of Turbine Blade Contacts, Blade Mechanics Seminar, Winterthur, CH
Konferenz
-
(2022): Optimal Sensor Placement and Model Updating of Axial Compressor Casing Components, Proceedings of IMAC-XL (40th) 2022: A Conference and Exposition on Structural Dynamics, Feb. 7-10, Orlando, Florida
-
(2020): Forced Response of Nonlinear Systems Under Combined Harmonic and Random Excitation, Kerschen, Brake et al. (Hg.) 2020 – Nonlinear Structures and Systems
DOI: 10.1007/978-3-030-12391-8_7 -
(2020): Modal Excitation of Circular Rotating Structures Using an Innovative Electromagnetic Device, Mains M., Dilworth B. (eds) Topics in Modal Analysis & Testing, Volume 8. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, Cham
DOI: 10.1007/978-3-030-12684-1_15
ISBN: 978-3-030-12684-1 -
(2020): Numerical investigations of the energy transfer between modes due to multi-resonances of a nonlinear friction-damped model, International Conference on Noise and Vibration Engineering (ISMA), Leuven, Belgium, September 7-9, 2020
-
(2019): Forced Response of Nonlinear Systems Under Combined Harmonic and Random Excitation, Kerschen, Brake et al. (Hg.) 2020 – Nonlinear Structures and Systems
DOI: 10.1007/978-3-030-12391-8_7 -
(2019): Potenzialstudie eines Verbunds aus entkoppelt betriebenen Aeroderivaten, Beitrag in: Hurtado, A.; Beckmann, M.; (Hrsg.): Kraftwerkstechnik 2019, SAXONIA
ISBN: 3934409938 -
(2019): A Priori Interface Reduction for Substructuring of Multistage Bladed Disks, Dynamic Substructures, Volume 4, Proceedings of the 37th IMAC, a Conference and Exposition on Structural Dynamics 2019, Springer, 13–21
ISBN: 3030121844 -
(2015): Mistuning of Blisks During Milling Process - Manufacturing and Repair, Deutsche Gesellschaft für Luft- und Raumfahrt (Hg.): 64. Deutscher Luft- und Raumfahrtkongress (DLRK), Rostock, Germany, September 22-24, 2015
-
(2015): Forced response of turbine bladings with alternating mistuning and friction damper coupling, EUROMECH Colloquium 573 Coupling and Nonlinear interactions in Rotating Machinery, Lyon, France, August 25-26, 2015
-
(2014): Introduction and Evaluation of an Experimental Setup for Material Damping Determination, Proc. Of ISROMAC-15, The 15th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, February 24 - 28, 2014
-
(2014): A Framework for the Computational Dynamic Analysis of Coupled Structures Using Nonlinear Modes, In: Kerschen G. (eds) Nonlinear Dynamics, Volume 2: Proceedings of the 32nd IMAC, A Conference and Exposition on Structural Dynamics, Orlando, Florida, USA, February 3-5, 2014
DOI: 10.1007/978-3-319-04522-1_5 -
(2014): Modal analysis of nonlinear dissipative systems: Application to vibration damping with shape memory materials, Proceedings of the 15th Conference on Nonlinear Vibrations, Localization and Energy Transfer, Istanbul, Turkey, July 2-4, 2014
-
(2014): Vibration analysis of structures with contact interfaces using nonlinear modes, Proceedings of the 11th World Congress on Computational Mechanics, July 20-25, Barcelona, Spain, 2014
-
(2013): Resonance Passage of Structures with Friction Contacts, Paper ID 345-993, 4th Canadian Conference on Nonlinear Solid Mechanics (CanCNSM), Montreal, Canada, July 23-26, 2013
-
(2013): Resonance Passage of Cyclic Symmetric Structures, International Conference on Vibration Problems (ICOVP-2013), Lissabon, Portugal, September 9-12, 2013
-
(2013): A Method of Modal Analysis and Synthesis for Mechanical Systems with Piecewise-Smooth Nonlinearities, Paper 682, 4th Canadian Conference on Nonlinear Solid Mechanics (CanCNSM), Montreal, Canada, July 23-26, 2013
-
(2013): Vibration Analysis of Shrouded Turbine Blades for a 30 MW Gas Turbine, Paper No. TBTS2013-2014, ASME 2013 Turbine Blade Tip Technical Symposium and Course Week (TBTS2013), Hamburg, Germany, September 30–October 3, 2013
DOI: 10.1115/TBTS2013-2014 -
(2012): Aeroakustik & Aeroelastik der Strömungsmaschinen - Eine Vorlesung als Reaktion auf aktuelle Herausforderungen in der Turbomaschinenentwicklung, DAGA 2012, 38. Jahrestagung für Akustik, Darmstadt, March 19-22, 2012
-
(2012): Experimental Analysis of an Eddy Current Damping Devce Applied to a Rotating Integrally Bladed Disk, Proc. Of ISROMAC-14 The 14th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, February 27 - March 2, 2012
-
(2012): Reduced Order Model of Mistuned Bladed Disks Using the Krylov-Subspace Combined with the Craig-Bampton Reduction Technique, Paper No. 18187, Proceedings of the 10th World Congress on Computational Mechanics, Sao Paulo, Brazil, July 8-13, 2012
DOI: 10.5151/meceng-wccm2012-18187 -
(2012): Nonlinear harmonic analysis of structures containing joints with impacts and friction, Paper No. 18336, Proceedings of the 10th World Congress on Computational Mechanics, Sao Paulo, Brazil, July 8-13, 2012
DOI: 10.5151/meceng-wccm2012-18336 -
(2011): Analysis of the Frequency Response of Mistuned Multi-Stage Bladed Disks, Paper No. 11-4, ICEAF II, 2nd International Conference of Engineering against Fracture, Mykonos, Greece, June 22-24, 2011
-
(2010): Analysis of the Influence of Blade Pattern Characteristics on the Forced Response of Mistuned Blisks with a Cyclic CMS-Based Substructure Model, Paper No. ESDA2010-25294, Proceedings of the ASME 2010 10th Biennial Conference on Engineering Systems and Design Analysis (ESDA 2010), Istanbul, Turkey, July 12-14, 2010
DOI: 10.1115/ESDA2010-25294 -
(2009): Modelling of Shunted Piezoceramic Actuators with Substructure Techniques and Application to a Bladed Disk Model, IEEE/ASME International Conference on Advanced Intelligent Mechatronics, Singapore, July 14-17, 2009
-
(2009): Active and Semiactive Vibration Damping of Turbine Blades with Piezoceramics, Proc. SPIE Smart Structures/NDE 2009, San Diego, March 8-12, 2009
-
(2008): Unidirectional Coupled Aerodynamic and Structural Mechanic Analysis of a Turbine Blading, Proc. of IMechE 9th Int. Conf. on Vibrations in Rotating Machinery, Exeter, S. 171-184
-
(2008): The Nonlinear Analysis of the Multiharmonic Forced Response of Coupled Turbine Blading, Proc. Of ISROMAC-12, The 12th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, February 27th - March 2, 2012
-
(2007): Schwingungsverhalten elastischer Körper mit nichtlinearen Kopplungen in ausgedehnten Reibkontakten, VDI-Tagung Nichtlineare Schwingungen - Reibung und Kontaktmechanik (VDI-Berichte 2022), Kassel, Germany, November 13-14, 2007
-
(2007): Schwingungsdämpfung durch Reibung: Theorie, Experiment, Anwendungen, VDI-Tagung Schwingungsdämpfung (VDI-Berichte 2003), Wiesloch, October 16-17, 2007
-
(2007): Passive Damping of Spacecraft Sandwich Panels, 10th European Conference on Spacecraft Structures, Materials & Mechanical Testing, Berlin, September 10-13, 2007
-
(2006): Dynamic Behaviour of Elastic Bodies Coupled by Extended Friction Contacts, Proc. of the 12th International Conference on Noise and Vibration Engineering (ISMA), Leuven, Belgiuem, September 18-20, 2006
-
(2006): Modeling of Assembled Combustion Engine Parts under Consideration of Micro Slip Effects in the Connection Flanges, Proc. of the 12th International Conference on Noise and Vibration Engineering (ISMA), Leuven, Belgium, September 18-20, 2006
-
(2002): Spatial Dynamics of Tuned and Mistuned Bladed Disk Assemblies with Cylindrical and Wedge Shaped Friction Dampers, Paper No. DD-028, Proc. of ISROMAC-9, The 9th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, USA, February 10-14, 2002
-
(2001): Schwingungsanalyse verstimmter Schaufelkränzemit Reibelementen, Wien, Tagungsband Schwingungen in rotierenden Maschinen V. Wien, February 26-28, 2001
-
(1998): Growth and Collapse of Vapor Bubbles in Subcooled Boiling near the Region of Alternating Boiling Modes, Kyongju, Korea, 11th Int. Heat Transfer Conf. 2, Kyongju, Korea, August 23-28, 1998
Berichte
-
(2019): Frequenz- und Dämpfungsvorhersage für freistehende Turbinenschaufeln mit Unterplattform-Dämpfer, Leibniz Universität Hannover, Förderkennzeichen BMWi 03ET7041L
DOI: 10.2314/KXP:1689220627
Zeitschrift
-
(2019): Parameter on Nonlinear Energy Sink attached to Multiple Degree of Freedom System, PAMM Proceedings in Applied Mathematics and Mechanics, Vol. 19, No. 1, 2019
DOI: 10.1002/pamm.201900272 -
(2015): Transient amplification of maximum vibration amplitudes, Proc. Appl. Math. Mech., 15: 47-48
DOI: 10.1002/pamm.201510014 -
(2015): Evaluation of a Finite Element Approach for Damping Determination, Proc. Appl. Math. Mech., 15: 201–202
DOI: 10.1002/pamm.201510091 -
(2015): The Vibrational Behavior of Coupled Bladed Disks with Variable Rotational Speed, Proc. Appl. Math. Mech., 15: 255–256
DOI: 10.1002/pamm.201510118 -
(2015): Harmonic Mistuning of Blisks, Proc. Appl. Math. Mech., 15: 641-642
DOI: 10.1002/pamm.201510310 -
(2010): Nonlinear Vibrations with Friction: A Multiharmonic Approach, Proc. Appl. Math. Mech., 10: 245–246
DOI: 10.1002/pamm.201010115 -
(2009): Mechanical model of a mistuned 2DOF-structure coupled by viscous damping, Proc. Appl. Math. Mech., 9: 237–238
DOI: 10.1002/pamm.200910092 -
(2007): The Vibrational Behaviour of Bladed Disks with Multiple Coupling Devices, Proc. Appl. Math. Mech., 7: 4040037–4040038
DOI: 10.1002/pamm.200700724 -
(2007): Modellierung der Schwingungen beim Werkzeugschleifen, Proc. Appl. Math. Mech., 7: 4050029–4050030
DOI: 10.1002/pamm.200700845 -
(2007): Damping of Structural Vibrations using an Electromotive Eddy Current Damper, Proc. Appl. Math. Mech., 7: 4040039–4040040
DOI: 10.1002/pamm.200700739 -
(2006): Aufbau und Regelung einer Magnetführung für Werkzeugmaschinen, Proc. Appl. Math. Mech., 6: 801–802
DOI: 10.1002/pamm.200610380 -
(2006): Symmetric and Asymmetric Underplatform Dampers for Turbine Blades, Proc. Appl. Math. Mech., 6: 251–252
DOI: 10.1002/pamm.200610106 -
(2006): Experimental Analysis of Shrouded Blades with Friction Contact, Proc. Appl. Math. Mech., 6: 263–264
DOI: 10.1002/pamm.200610112 -
(2005): The Vibrational Behavior of Bladed Disks in Consideration of Friction Damping and Contact Elasticity, Proc. Appl. Math. Mech., 5: 131–132
DOI: 10.1002/pamm.200510046 -
(2003): Design of Friction Dampers for Mistuned Bladed Disks, Proc. Appl. Math. Mech. 3, 118–119
DOI: 10.1002/pamm.200310336 -
(2001): Vibrational Behaviour of Turbine Blade Assemblies with Friction Dampers, Zeitschrift für angewandte Math. Mech. 81, 207-208, Berlin
Patentschriften
-
(2018): Elektromagnetischer Schwingungsanreger zur Schwingungsanregung der Schaufeln eines Schaufelkranzes, Patent DE 10 2017 114 153 A1 2018.12.27, Offenlegungsschrift vom 27.12.2018
-
(2011): Verfahren zum Dämpfen von während des Betriebes auftretenden mechanischen Schwingungen in einer Turbomaschinenschaufel, Turbomaschinenschaufel zur Durchführung des Verfahrens sowie piezoelektrisches Dämpfungselement zum Einbau in eine solche Turbomaschinenschaufel, Europäische Patentanmeldung EP 2 458 150 A1, 04.11.2011