Leibniz Universität Hannover Fakultät Fakultät für Maschinenbau
English Kontakt English
Institut für Dynamik und Schwingungen
 
Institut für Dynamik und Schwingungen Forschung Arbeitsgruppen Nichtlineare Strukturdynamik
Publikationen

Publikationen der Arbeitsgruppe Nichtlineare Strukturdynamik

Zeitschrift (reviewed)

  • Oel, M.; Kleyman, G.; Jonkeren, M.; Tatzko, S.; Ehlers, T. (2024): Mode selective damping behavior of additively manufactured beam structures,  Progress in Additive Manufacturing
    DOI: https://doi.org/10.1007/s40964-024-00838-z
  • Ehlers, T.; Oel, M.; Tatzko, S.; Kleyman, G.; Niedermeyer, J.; Wallaschek, J.; Lachmayer, R. (2023): Design Guidelines for Additive Manufactured Particle Dampers: A Review,  Procedia CIRP, Volume 119, 2023, Pages 891-896
    DOI: 10.1016/j.procir.2023.03.134
    ISSN: 2212-8271
  • Tatzko, S. (2023): Internal resonance in nonlinear structures — and what itcan be used for,  Proc. Appl. Math. Mech. 2023; 23202300210
    DOI: 10.1002/pamm.202300210
  • Tatzko, S.; Kleyman, G.; Wallaschek, J. (2023): Continuation methods for lab experiments of nonlinear vibrations,  GAMM-Mitteilungen, Vol. 46, 2023
    DOI: 10.1002/gamm.202300009
  • Jahn, M.; Tatzko, S. (2022): Model based investigation of reluctance force shunt damping - A numerical parameter study,  International Journal of Non-Linear Mechanics, Volume 141
    DOI: 10.1016/j.ijnonlinmec.2022.103953
  • Ehlers, T.; Tatzko, S.; Wallaschek, J.; Lachmayer, R. (2021): Design of particle dampers for additive manufacturing,  Additive Manufacturing, 38, 101752, 2021
    DOI: https://doi.org/10.1016/j.addma.2020.101752
  • Kleyman, G.; Paehr, M.; Tatzko, S. (2020): Application of Control-Based-Continuation for characterization of dynamic systems with stiffness and friction nonlinearities,  Mechanics Research Communications
    DOI: 10.1016/j.mechrescom.2020.103520
  • Jahn, M.; Stender, M.; Tatzko, S.; Hoffmann, N.; Grolet, A.; Wallaschek, J. (2020): The extended periodic motion concept for fast limit cycle detection of self-excited systems,  Computers and Structures
    DOI: 10.1016/j.compstruc.2019.106139
  • Jahn, M.; Tatzko, S.; Panning-von Scheidt, L.; Wallaschek, J. (2019): Comparison of different harmonic balance based methodologies for computation of nonlinear modes of non-conservative mechanical systems,  Mech. Syst. Signal Process. 127 (2019), 159-171
    DOI: 10.1016/j.ymssp.2019.03.005
  • Tatzko, S.; Jahn, M. (2019): On the use of complex numbers in equations of nonlinear structural dynamics,  Mech. Syst. Signal Process. 126 (2019), 626-635
    DOI: 10.1016/j.ymssp.2019.02.041
  • Böttcher, J.; Jahn, M.; Tatzko S. (2017): Characterization of Mechanical Properties of Pseudoelastic Shape Memory Alloys under Harmonic Excitation,  Materials Research Express (2017)
    DOI: https://doi.org/10.1088/2053-1591/aa9bac
  • Pohle, L.; Tatzko, S.; Panning-von Scheidt, L.; Wallaschek, J. (2017): High Order Sensitivity Analysis of a Mistuned Blisk Including Intentional Mistuning,  J. of Theoretical and Applied Mechanics 55, 1, 353-368
    DOI: 10.15632/jtam-pl.55.1.353
  • Krack, M.; Tatzko, S.; Panning-von Scheidt, L.; Wallaschek, J. (2014): Reliability Optimization of Friction-Damped Systems Using Nonlinear Modes,  Journal of Sound and Vibration 333, 2699–2712
    DOI: 10.1016/j.jsv.2014.02.008

Konferenz (reviewed)

  • Wöhler, H.; Tatzko, S. (2024): Improvement of Bandgap Properties in Finite Element Metamaterial Beam Structures by Local Damping Measures,  Proceedings of the 42nd IMAC: A Conference and Exposition on Structural Dynamics, January 29 - February 1, Orlando (FL), USA, 2024
  • Jahn, M.; Tatzko, S. (2024): Numerical Investigation of a Reluctance Force Shunt Damping System,  Brake, M.R., Renson, L., Kuether, R.J., Tiso, P. (eds) Nonlinear Structures & Systems, Vol. 1. IMAC 2024. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, Cham, 2024
  • Wöhler, H.; Tatzko, S. (2024): Improvement of Bandgap Properties in Finite Metamaterial Beam Structures by Local Damping Measures,  Dilworth, B.J., Marinone, T., Furlich, J. (eds) Topics in Modal Analysis & Parameter Identification, Vol. 9. IMAC 2024. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, Cham, 2024
  • Tatzko, S.; Breunung, T.; Wöhler, H.; Förster, A.; Kleyman, G. (2024): Modeling Nonlinear Beam Vibrations: A Comparison Between Classical and Data-Driven Approaches,  Brake, M.R., Renson, L., Kuether, R.J., Tiso, P. (eds) Nonlinear Structures & Systems, Vol. 1. IMAC 2024. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, Cham, 2024
  • Fischer, H.; Tatzko, S. (2023): Analysis of Traveling Wave Properties of Mechanical Metamaterial Structures: Simulation and Experiment,  Proceedings of the 41st: A Conference and Exposition on Structural Dynamics 2023, February 13-16, Austin (TX), USA, 2023
    DOI: 10.1007/978-3-031-34942-3_21
  • Kleyman, G.; Tatzko, S.; Wallaschek, J. (2022): Application of experimental continuation to a geometrically nonlinear beam,  Proceedings of ISMA2022, September 12-14, Leuven, Belgium, 2022
  • Kleyman, G.; Tatzko, S.; Wallaschek, J. (2022): Optimal Controller Gain for the Control Based Continuation of a Duffing-Oscillator,  ENOC2022, July 17-22, Lyon, France, 2022
  • Tatzko, S.; Ehlers, T.; Kleyman, G.; Lachmayer, R. (2022): Nonlinear granular damping of structures with cavaties from additive manufacturing,  ENOC2022, July 17-22, Lyon, France, 2022
  • Kasper, T.; Tatzko, S.; Wallaschek, J. (2020): Parameter identification for nonsmooth nonlinear dynamical systems,  Konferenzbeitrag ISMA
  • Gorelik, I.; Wiese, M.; Bürger, L.; Tatzko, S.; Hohl, A.; Reckmann, H.; Wallaschek, J. (2018): Application of the Transfer Matrix Method for the Analysis of Lateral Vibrations of Drillstrings with Parameter Uncertainties ,  Model Validation and Uncertainty Quantification, Volume 3, Proceedings of the 36th IMAC, February 12-15, Orlando (FL), Society of Experimental Mechanics Series, Springer International Publishing, 2018
  • Tatzko, S.; Panning-von Scheidt, L.; Wallaschek, J. (2014): Dynamics of Bladed Disks with Frictional Coupling and Alternate Mistuning Pattern,  Paper No. IMECE2014-38263, Proceedings of the ASME 2014 International Mechanical Engineering Congress and Exposition (IMECE), November 14-20, 2014, Montreal, Canada
    DOI: 10.1115/IMECE2014-38263
  • Tatzko, S.; Panning-von Scheidt, L.; Wallaschek, J.; Kayser, A.; Walz, G. (2013): Investigation of Alternate Mistuned Turbine Blades Non-Linear Coupled by Underplatform Dampers,  Paper No. GT2013-95681, ASME Turbo Expo 2013: Turbomachinery Technical Conference and Exposition, San Antonio, Texas, June 3-6, 2013
    DOI: 10.1115/GT2013-95681
  • Tatzko, S.; Panning-von Scheidt, L.; Wallaschek, J.; Kayser, A. (2012): Alternate Mistuning of Turbine Bladings Coupled by Underplatform Dampers,  Paper No. IDETC/CIE2012-70863, Proceedings of ASME 2012 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE, Chicago, USA, August 12-15, 2012
    DOI: 10.1115/DETC2012-70863
  • Schurzig, D.; Tatzko, S.; Panning-von Scheidt, L.; Wallaschek, J. (2012): Modeling Contact Dynamics of Vanes with Adjustable Upstream Flow Angles,  Paper No. GT2012-68185, ASME Turbo Expo 2012: Turbomachinery Technical Conference and Exposition, Copenhagen, Denmark, June 11-15, 2012
    DOI: 10.1115/GT2012-68185
  • Tatzko, S. (2011): Unilateral Impact and Contact of Elastic Structures Using Lagrangian Multipliers,  Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, 11-17 November, Denver, USA (IMECE2011-63790)
  • Tatzko, S.; Grönefeld, P.; Wangenheim,M. (2009): Application of LCP contact formulation on mechanical systems with nonrigid coupled unilateral contact points illustrated with a simple model of a windscreen wiper,  Proceedings of the ASME 2009 International Mechanical Engineering Congress & Exposition IMECE2009, Lake Buena Vista, Florida, USA

Beiträge in Büchern

  • Kleyman, G.; Jahn, M.; Tatzko, S.; Panning-von Scheidt, L. (2023): A Combined Numerical-Experimental Approach for the Damping Evaluation of Non-Linear Dissipative Vibration Systems,  Eberhard, P. (ed.).: Lecture Notes in Applied and Computational Mechanics, Volume 102: Calm, Smooth and Smart. Novel Approaches for Influencing Vibrations by Means of Deliberately Introduced Dissipation, pp. 285-303
    DOI: 10.1007/978-3-031-36143-2

Konferenz

  • Fischer, H.; Tatzko, S. (2020): Traveling wave effects in structures with local viscous and friction damping,  International Conference on Noise and Vibration Engineering (ISMA), Leuven, Belgium, September 7-9, 2020
  • Kleyman, G.; Jahn, M.; Tatzko, S. (2020): Hybrid nonlinear phase resonance testing utilizing realtime substructuring and control based continuation,  International Conference on Noise and Vibration Engineering (ISMA), Leuven, Belgium, September 7-9, 2020
  • Marhenke, N.; Wallaschek, J.; Panning-von Scheidt, L.; Tatzko, S.; Hartung, A.; Schwarz, S. (2020): Numerical investigations of the energy transfer between modes due to multi-resonances of a nonlinear friction-damped model,  International Conference on Noise and Vibration Engineering (ISMA), Leuven, Belgium, September 7-9, 2020
  • Tatzko, S.; Panning-von Scheidt, L.; Wallaschek, J. (2015): Forced response of turbine bladings with alternating mistuning and friction damper coupling,  EUROMECH Colloquium 573 Coupling and Nonlinear interactions in Rotating Machinery, Lyon, France, August 25-26, 2015
  • Grönefeld, P.; Tatzko, S.; Wangenheim, M. (2009): Sprag-Slip Simulation with a Modular Wiper Model,  Proceedings of the 7th EUROMECH Solid Mechanics Conference, S. 293-294, Lisbon, Portugal

Letzte Änderung: 21.10.25 Druckversion

So erreichen Sie uns
Kontakt