Publikationen

Zeitschrift (reviewed)

  • Brase, M.; Binder, J.; Jonkeren, M.; Wangenheim, M. (2024): A Generalised Method for Friction Optimisation of Surface Textured Seals by Machine LearningLubricants 12 (1), 20
    DOI: https://doi.org/10.3390/lubricants12010020
  • Fröhlich, M.; Deutz, J.; Wangenheim, M.; Rau, T.S., Lenarz, T.; Kral, A.; Schurzig, D. (2024): The role of pressure and friction forces in automated insertion of cochlear implantsFrontiers in Neurology 15, 1430694
    DOI: https://doi.org/10.3389/fneur.2024.1430694
  • Berthold, R.; Burgner‑Kahrs, J.; Wangenheim, M.; Kahms, S. (2023): Investigating frictional contact behavior for soft material robot simulationsMeccanica (2023) 58:2165–2176
    DOI: https://doi.org/10.1007/s11012-023-01719-5
  • Brinkmann, K.; Hoffmann, T.; Panning-von Scheidt, L.; Stüer, H. (2023): Transient resonance passage of a mistuned bladed disk with and without underplatform dampersInternational Journal of Turbomachinery, Propulsion and Power, 2023, 8(4), 38.
    DOI: 10.3390/ijtpp8040038
  • Heidelberger, J.A.; Wangenheim, M.; Wiese, K.; Wies, B.; Bederna, C. (2023): Target Conflict for Force Transmission in Lateral and Longitudinal Direction of Rotated Tread Block Samples on Different Road Surfaces (Dry, Wet, Snow, and Ice)Tire Science And Technology
    DOI: https://doi.org/10.2346/TST-22-011
  • Kahms, S.; Hindemith, M.; Wangenheim, M. (2023): Thermomechanical Modeling of Aircraft Tire-Runway Contact for Transient ManeuversTire Science and Technology, TSTCA, Vol. 51, No. 2, April-June
    DOI: https://doi.org/10.2346/tire.23.22012
  • Wiese, M.; Berthold, R.; Wangenheim, M.; Raatz, A. (2023): Describing and Analyzing Mechanical Contact for Continuum Robots Using a Shooting-Based Cosserat Rod ImplementationIEEE Robotics and Automation Letters, VOL. 9, NO. 2
    DOI: 10.1109/LRA.2023.3346272
  • Amer, M., Paehr, M.; Panning-von Scheidt, L.; Seume, J. R.; Schmied, J. (2022): Determining the Influence of Casing Vibrational Behaviour On Rotordynamics.ASME. J. Eng. Gas Turbines Power 144(5): 051012
    DOI: 10.1115/1.4053123
  • Hönecke, T.; Scharze, M.; Wangenheim, M.; Savov, P.; Windhagen, H. (2022): Noise exposure during robot-assisted total knee arthrosplastyArchives of Orthopedic and Trauma Surgery
    DOI: 10.1007/s00402-022-04454-w
  • Maroldt, N.; Schwerdt, L.; Berger, R.; Panning-von Scheidt, L.; Rolfes, R.; Wallaschek, J.; Seume, J. R. (2022): Reduced Order Modeling of Forced Response in a Multistage Compressor Under Mistuning and AerocouplingASME. J. Eng. Gas Turbines Power 144(11): 111017
    DOI: https://doi.org/10.1115/1.4055368
  • Carassale, L.; Denoël, V.; Martel, C.; Panning-von Scheidt, L. (2021): Key Features of the Transient Amplification of Mistuned SystemsASME. J. Eng. Gas Turbines Power. March 2021; 143(3): 031016.
    DOI: 10.1115/1.4049501
  • Hartung, F.; Garcia, M.A.; Berger, T.; Hindemith, M.; Wangenheim, M.; Kaliske, M. (2021): Experimental and Numerical Investigation of Tire Tread Wear on Block LevelLubricants, 9(12), 113
    DOI: https://doi.org/10.3390/lubricants9120113
  • Hindemith, M.; Heidelberger, J.; Wangenheim, M. (2021): Investigation of the Influence of Snow Track Density on Tire Tread Block Traction by Experiments and Discrete Element Method SimulationTire Science and Technology
    DOI: https://doi.org/10.2346/tire.21.20023
  • Hoffmann, T.; Panning-von Scheidt, L.; Wallaschek, J. (2021): Single Nodal Diameter Excitation of Turbine Blades: Experimental and Theoretical Study.ASME. J. Eng. Gas Turbines Power. September 2021; 143(9): 091028.
    DOI: https://doi.org/10.1115/1.4051172
  • Runge, S.; Ignatyev, P.A.; Wangenheim, M.; Bederna, C.; Wies, B.; Wallaschek, J. (2021): Transient abrasion on a rubber sample due to highly dynamic contact conditionsWear
    DOI: https://doi.org/10.1016/j.wear.2021.203848
  • Zambrano, V., Brase, M., Hernández-Gascón, B., Wangenheim, M., Gracia, L.A., Viejo, I., Izquierdo, S., Valdés, J.R. (2021): A Digital Twin for Friction Prediction in Dynamic Rubber Applications with Surface TexturesLubricants 2021, 9(5), 57
    DOI: https://doi.org/10.3390/lubricants9050057
  • Förster, A.; Panning-von Scheidt, L.; Wallaschek, J. (2020): Equivalent Linearization of Bladed Disk Assemblies with Friction Nonlinearities Under Random ExcitationJournal of Engineering for Gas Turbines and Power
    DOI: 10.1115/1.4048407
  • Heinze, T.; Panning-von Scheidt, L.; Wallaschek, J. (2020): Global detection of detached periodic solution branches of friction-damped mechanical systems.Nonlinear Dynamics. 99(2).
    DOI: 10.1007/s11071-019-05425-4
  • Jahn, M.; Stender, M.; Tatzko, S.; Hoffmann, N.; Grolet, A.; Wallaschek, J. (2020): The extended periodic motion concept for fast limit cycle detection of self-excited systemsComputers and Structures
    DOI: 10.1016/j.compstruc.2019.106139
  • Kahms, S.; Wangenheim, M. (2020): Experimental Investigation and Simulation of Aircraft Tire WearTire Science and Technology (2021) 49 (1): 55-74
    DOI: https://doi.org/10.2346/tire.20.180201
  • Kleyman, G.; Paehr, M.; Tatzko, S. (2020): Application of Control-Based-Continuation for characterization of dynamic systems with stiffness and friction nonlinearitiesMechanics Research Communications
    DOI: 10.1016/j.mechrescom.2020.103520
  • Leenders, A.; Burgwitz, M.; Wangenheim, M. (2020): Dynamic Behavior of Fractional Viscoelastic Tire Tread Blocks on Different Ice SurfacesTire Science and Technology
    DOI: https://doi.org/10.2346/tire.20.190001
  • Lian, Y., Long, Y., Zhao, G., Mu, C., Li, X., Deng, J., Xie, C. (2020): Performance of CrCN-WS2 hard/soft composite coated tools in dry cutting of titanium alloysJournal of Manufacturing Processes, 54, pp.201-209
    DOI: https://doi.org/10.1016/j.jmapro.2020.03.014
  • Long, Y., He, B., Cui, W., Ji, Y., Zhuang, X., Twiefel, J. (2020): Investigations on the mechanism of microweld changes during ultrasonic wire bonding by molecular dynamics simulationMaterials & Design, 192, 108718
    DOI: https://doi.org/10.1016/j.matdes.2020.108718
  • Scheel, M.; Kleyman, G.; Tatar, A.; Brake, M. R. W.; Peter, S.; Noël, J.-P.; Allen, M. S.; Krack, M. (2020): Experimental assessment of polynomial nonlinear state-space and nonlinear-mode models for near-resonant vibrationsMechanical Systems and Signal Proocessing
    DOI: 10.1016/j.ymssp.2020.106796
  • Schmelt, A. S.; Twiefel, J. (2020): Flaw Detection on a Tilted Particleboard by Use of the Spec-Radiation MethodMDPI Appl. Sci. Weitere Informationen
    DOI: https://doi.org/10.3390/app10238513
  • Schmelt, A.S.; Marhenke, T.; Hasener, J.; Twiefel, J. (2020): Investigation and Enhancement of the Detectability of Flaws with a Coarse Measuring Grid and Air Coupled Ultrasound for NDT of Panel Materials Using the Re-Radiation MethodMDPI-applied science | Datei |
    DOI: 10.3390/app10031155
  • Schmelt, A.S.; Twiefel, J. (2020): The Spec-Radiation Method as a Fast Alternative to the Re-Radiation Method for the Detection of Flaws in Wooden ParticleboardsMDPI Appl. Sci. 2020, 10, 6663 | Datei |
    DOI: https://doi.org/10.3390/app10196663
  • Schwerdt, L.; Panning-von Scheidt, L.; Wallaschek, J. (2020): A Model Order Reduction Method for Bladed Disks with Large Geometric Mistuning using a Partially Reduced Intermediate System ModelJ. Eng. Gas Turbines Power
    DOI: 10.1115/1.4049357
  • Stender, M.; Jahn, M.; Hoffmann, N.; Wallaschek, J. (2020): Hyperchaos co-existing with periodic orbits in a frictional oscillatorJournal of Sound and Vibration
    DOI: https://doi.org/10.1016/j.jsv.2020.115203
  • You, C., Zhao, G., Chu, X., Zhou, W., Long, Y., Lian Y. (2020): Design, preparation and cutting performance of bionic cutting tools based on head microstructures of dung beetleJournal of Manufacturing Processes, 58, pp.129-135
    DOI: https://doi.org/10.1016/j.jmapro.2020.07.057
  • Zhang, T., Long, Y., Mu, C., Zhou, W., Zhao, G., Lian Y. (2020): Performance of soft/hard composite dual-effect coated tool in dry cutting of carbon fiber–reinforced polymerThe International Journal of Advanced Manufacturing Technology, 109, pp.2221-2232
    DOI: https://doi.org/10.1007/s00170-020-05778-w
  • Hoffmann, T.; Panning-von Scheidt, L.; Wallaschek, J. (2019): Analysis of Contacts in Friction Damped Turbine Blades using Dimensionless NumbersJ. Eng. Gas Turbines Power. Dec 2019, 141(12): 121023 (7 pages)
    DOI: 10.1115/1.4044481
  • Bai, F., Long, Y., Saalbach, K.A., Twiefel, J. (2019): Theoretical and experimental investigations of ultrasonic sound fields in thin bubbly liquid layers for ultrasonic cavitation peeningUltrasonics, 93, pp.130-138
    DOI: https://doi.org/10.1016/j.ultras.2018.11.010
  • Banerjee, S. S.; Arief, I.; Berthold, R.; Wiese, M.; Bartholdt, M.; Ganguli, D.; Mitra, S.; Mandal, S.; Wallaschek, J.; Raatz, A.; Heinrich, G.; Das, A (2019): Super-elastic ultrasoft natural rubber-based piezoresistive sensors for active sensing interface embedded on soft robotic actuatorApplied Materials Today, Volume 25
    DOI: https://doi.org/10.1016/j.apmt.2021.101219
  • Denkena, B.; Breidenstein, B.; Grove, T.; Prasanthan, V.; Overmeyer, L.; Nothdurft, S.; Kaierle, S.; Wallaschek, J.; Twiefel, J.; Ohrdes, H.; Maier, H. J.; Hassel, T.; Mildebrath, M.: (2019): Surface integrity of turned laser-welded hybrid shaftsProduction Engineering
    DOI: 10.1007/s11740-018-0862-8
  • Hoffmann, T.; Panning-von Scheidt, L.; Wallaschek, J. (2019): Measured and Simulated Forced Response of a Rotating Turbine Disk with Asymmetric and Cylindrical Underplatform DampersJournal of Engineering for Gas Turbines and Power
    DOI: 10.1115/1.4045337
  • Jahn, M.; Tatzko, S.; Panning-von Scheidt, L.; Wallaschek, J. (2019): Comparison of different harmonic balance based methodologies for computation of nonlinear modes of non-conservative mechanical systemsMech. Syst. Signal Process. 127 (2019), 159-171
    DOI: 10.1016/j.ymssp.2019.03.005
  • Li, Y., Cheng, Z., Chen, X., Long, Y., Li, X., Li, F., Li, J., Twiefel, J. (2019): Constitutive modeling and deformation analysis for the ultrasonic-assisted incremental forming processThe International Journal of Advanced Manufacturing Technology 104, pp.2287–2299
    DOI: https://doi.org/10.1007/s00170-019-04031-3
  • Long, Y., Bai, F., Zhang, Y., Saalbach, K.A., Twiefel, J. (2019): Impacts of ultrasound on oxide removal–An attempt towards acid-free cleaningUltrasonics sonochemistry, 57, pp.1-11
    DOI: https://doi.org/10.1016/j.ultsonch.2019.05.003
  • Long, Y., Schneider, F., Li, C., Hermsdorf, J., Twiefel, J., Wallaschek, J. (2019): Quantification of the energy flows during ultrasonic wire bonding under different process parametersInternational Journal of Precision Engineering and Manufacturing-Green Technology, 6(3), pp.449-463
    DOI: https://doi.org/10.1007/s40684-019-00061-0
  • Long, Y., Twiefel, J., Wallaschek, J. (2019): Contact mechanics and friction processes in ultrasonic wire bonding-Basic theories and experimental investigationsJournal of Sound and Vibration, p.115021
    DOI: https://doi.org/10.1016/j.jsv.2019.115021
  • Nothdurft, S., Ohrdes, H., Twiefel, J., Wallascheck, J., Mildebrath, M., Maier, H. J., Hassel, T., Overmeyer, L., Kaierle, S. (2019): Influence of ultrasonic amplitude and position in the vibration distribution on the microstructure of a laser welded aluminum alloyJournal of Laser Applications 31
  • Schwerdt, L.; Willeke, S.; Panning-von Scheidt, L.; Wallaschek, J. (2019): Reduced-Order Modeling of Bladed Disks Considering Small Mistuning the Disk SectorsJ. Eng. Gas Turbines Power. May 2019, 141(5): 052502 (7 pages)
    DOI: 10.1115/1.4041071
  • Steinwolf, A., Wangenheim, M. and Wallaschek, J. (2019): On the use of non-Gaussian models for statistical description of road micro-surface profilesInt. J. Vehicle Systems Modelling and Testing, Vol. 13, No. 3, pp.260–274
    DOI: 10.1504/IJVSMT.2019.101551
  • Tatzko, S.; Jahn, M. (2019): On the use of complex numbers in equations of nonlinear structural dynamicsMech. Syst. Signal Process. 126 (2019), 626-635
    DOI: 10.1016/j.ymssp.2019.02.041
  • Wallaschek, J.; Willeke, S.; Panning-von Scheidt, L. (2019): Discussion of “Dynamic Modeling and Projection-Based Reduction Methods for Bladed Disks with Nonlinear Frictional and Intermittent Contact Interfaces” (Mitra, M., Epureanu, B. I., 2018, ASME Appl. Mech. Rev., 71(5), p. 050803).ASME. Appl. Mech. Rev. September 2019; 71(5): 055502.
    DOI: 10.1115/1.4044933
  • Aboulfotoh, N.; Twiefel, J. (2018): On developing an optimal design procedure for a bimorph piezoelectric cantilever energy harvester under a predefined volumeMechanical Systems and Signal Processing 106 (2018): 1-12
  • Andreas S. Schmelt, Viktor Hofmann, Eike C. Fischer, Marc C. Wurz, Jens Twiefel (2018): Design and characterization of the lateral actuator of a bimodal tactile display with two excitation directionsDisplays, Volume 54, September 2018, Pages 34-46 | Datei |
    DOI: https://doi.org/10.1016/j.displa.2018.09.002
  • Bai, F., Saalbach, K.-A., Long Y., Twiefel, J., Wallaschek, J. (2018): Capability evaluation of ultrasonic cavitation peening at different standoff distances.Ultrasonics
    DOI: /10.1016/j.ultras.2017.10.013
  • Bonhage, M.; Adler, J.T.; Kolhoff, C.; Hentschel, O.P.; Schlesier, K.-D.; Panning-von Scheidt, L.; Wallaschek, J. (2018): Transient amplitude amplification of mistuned structures: An experimental validationJ. Sound and Vibration 436 (2018) 236–252
    DOI: 10.1016/j.jsv.2018.07.031
  • Förster, A.; Panning-von Scheidt, L.; Wallaschek, J. (2018): Approximate Solution of the Fokker–Planck Equation for a Multidegree of Freedom Frictionally Damped Bladed Disk Under Random ExcitationJ. Eng. Gas Turbines Power. 2018; 141(1):011004-011004-8, Paper No: GTP-18-1279
    DOI: 10.1115/1.4040740
  • Fricke, S.; Hager, C.; Solovyev, S.; Wangenheim, M.; Wallaschek, J. (2018): Influence of surface form deviations on friction in mixed lubricationTribology International, Volume 118, 491-499
    DOI: https://doi.org/10.1016/j.triboint.2017.05.032
  • Fushi Bai, Kai-Alexander Saalbach, Liang Wang, Xiaogeng Wang, Jens Twiefel (2018): Impact of time on ultrasonic cavitation peening via detection of surface plastic deformationUltrasonics
    DOI: /10.1016/j.ultras.2017.12.001
  • Hartung, A.; Hackenberg, H.-P.; Krack, M.; Gross, J.; Heinze, T.; Panning-von Scheidt, L. (2018): Rig and Engine Validation of the Nonlinear Forced Response Analysis Performed by the Tool OrAgLJ. Eng. Gas Turbines Power. 2018; 141(1):011004-011004-8, Paper No: GTP-18-1279
    DOI: 10.1115/1.4041160
  • Heinze, T.; Panning-von Scheidt, L.; Wallaschek, J.; Hartung, A. (2018): Rotational Speed-Dependent Contact Formulation for Nonlinear Blade Dynamics PredictionJ. Eng. Gas Turbines Power. 2018; 141(4):042503-042503-11
    DOI: 10.1115/1.4040843
  • Hüls, M.; Panning-von Scheidt, L., Wallaschek, J. (2018): Influence of Geometric Design Parameters onto Vibratory Response and HCF Safety for Turbine Blades with Friction DamperJ. Eng. Gas Turbines Power. 2018; 141(4):041022-041022-10
    DOI: 10.1115/1.4040732
  • Hüls, M.; Panning-von Scheidt, L.; Wallaschek, J. (2018): Combined Airfoil and Snubber Design Optimization of Turbine Blades With Respect to Friction DampingJ. Turbomach. 2018; 140(8):081007-081007-11, TURBO-18-1048
    DOI: 10.1115/1.4040679
  • Kai-Alexander Saalbach, Hendrik Ohrdes, Jens Twiefel (2018): Closed Loop Cavitation Control - A Step Towards SonomechatronicsUltrasonics Sonochemistry
    DOI: /10.1016/j.ultsonch.2018.01.021
  • Kai-Alexander Saalbach, Jens Twiefel, Jörg Wallaschek (2018): Self-sensing cavitation detection in ultrasound-induced acoustic cavitationUltrasonics
    DOI: /10.1016/j.ultras.2018.06.016
  • Long Y., Li Y., Sun J., Ille I., Li J., Twiefel J. (2018): Effects of process parameters on force reduction and temperature variation during ultrasonic assisted incremental sheet forming process, The International Journal of Advanced Manufacturing Technology, pp. 1-12
    DOI: https://doi.org/10.1007/s00170-018-1886-0
  • Long, Y., Dencker, F., Isaak, A., Hermsdorf, J., Wurz, M., Twiefel, J. (2018): Self-Cleaning Mechanisms in Ultrasonic Bonding of Al Wire, Journal of Materials Processing Technology 258, pp. 58-66
    DOI: https://doi.org/10.1016/j.jmatprotec.2018.03.016
  • Long, Y., Dencker, F., Isaak, A., Li, C., Schneider, F., Hermsdorf, J., Wurz, M., Twiefel, J., Wallaschek, J. (2018): Revealing of ultrasonic wire bonding mechanisms via metal-glass bondingMaterials Science and Engineering: B
    DOI: https://doi.org/10.1016/j.mseb.2018.11.010
  • Nothdurft, S.; Springer, A.; Kaierle, S.; Mildebrath, M.; Maier, H. J.; Hassel, T.; Ohrdes, H.; Twiefel, J.; Wallaschek, J.; Overmeyer, L. (2018): Laser welding of dissimilar low-alloyed steel-steel butt joints and the effects of beam position and ultrasound excitation on the microstructureJournal of Laser Applications 30, 3, 032417
  • Wang, L., Sun, W., Long, Y., Yang, X. (2018): Reliability-Based Performance Optimization of Tunnel Boring Machine Considering Geological Uncertainties, IEEE Access 6, pp. 19086 - 19098
    DOI: 10.1109/ACCESS.2018.2821190
  • Willeke, S.; Schwerdt, L.; Panning-von Scheidt, L., Wallaschek, J. (2018): Intentional Response Reduction by Harmonic Mistuning of Bladed Disks with Aerodynamic DampingJ. Eng. Gas Turbines Power. 2018;140(12):121010-121010-10
    DOI: 10.1115/1.4040898
  • Aboulfotoh, N.; Twiefel, J. (2017): A Study on Bandwidth and Performance Limitations of Array Vibration Harvester ConfigurationsEnergy Harvesting and Systems
  • Aboulfotoh, N.; Twiefel, J.; Krack, M. ; Wallaschek, J. (2017): Experimental Study on Performance Enhancement of a Piezoelectric Vibration Energy Harvester by applying Self-Resonating BehaviorEnergy Harvesting and Systems, Oct. 2017
    DOI: 10.1515/ehs-2016-0027
  • Bai, F., Saalbach, K.-A., Twiefel, J., & Wallaschek, J. (2017): Effect of different standoff distance and driving current on transducer during ultrasonic cavitation peening. Sensors and Actuators A: Physical.
    DOI: /10.1016/j.sna.2017.05.002
  • Blohm, T.; Nothdurft, S.; Mildebrath, M.; Ohrdes, H.; Richter, J.; Stonis, M.; Langner, J.; Springer, A.; Kaierle, S.; Hassel, T.; Wallaschek, J.; Overmeyer, L.; Behrens, B.-A. (2017): Investigation of the joining zone of laser welded and cross wedge rolled hybrid partsInternational Journal of Material Forming
    DOI: 10.1007/s12289-017-1393-0
  • Böttcher, J.; Jahn, M.; Tatzko S. (2017): Characterization of Mechanical Properties of Pseudoelastic Shape Memory Alloys under Harmonic ExcitationMaterials Research Express (2017)
    DOI: https://doi.org/10.1088/2053-1591/aa9bac
  • Heinze, T.; Panning-von Scheidt, L.; Wallaschek, J.; Hartung, A. (2017): A Taylor Series Expansion Approach for Nonlinear Blade Forced Response Prediction Considering Variable Rotational SpeedJ. Eng. Gas Turbines Power 139(6), 062503
    DOI: 10.1115/1.4035286
  • Hofmann, V.; Twiefel, J (2017): Self-Sensing with Loaded Piezoelectric Bending Actuators, Sensors and Actuators APhysical, Volume 263, August 2017, Pages 737-743
  • Krack, M.; Aboulfotoh, N.; Twiefel, J.; Wallaschek, J.; Bergman, L.A.; Vakakis, A.F. (2017): Toward understanding the self-adaptive dynamics of a harmonically forced beam with a sliding massArchive of Applied Mechanics
  • Linke, T.; Wiese, K.; Wangenheim, M.; Wies, B.; Wallaschek, J. (2017): Investigation of Snow Milling Mechanics to Optimize Winter Tire TractionTire Science and Technology 45 (3), 162-174
    DOI: 10.2346/tire.17.450302
  • Long, Y.; Twiefel, J. and Wallaschek, J. (2017): A review on the mechanisms of ultrasonic wedge-wedge bondingJournal of Materials Processing Technology, 245, 2017, pp. 241-258
  • Mildebrath, M.; Somonov, V.; Hassel, T.; Nothdurft, S.; Ohrdes, H.; Springer, A.; Kaierle, S.; Maier, H.J.; Wallascheck, J. (2017): Influence of Silicon on the Structure And Weldability of Steel-Aluminium Joints Processed by Non-Vacuum Electron Beam WeldingInternational Journal of Emerging Technology and Advanced Engineering, Volume 7, Issue 9, September 2017, p. 348-356
  • Ohrdes, H.; Ille, I.; Twiefel, J.; Wallaschek, J.; Nogueira, R.; Rosenwinkel, K. H. (2017): A control system for ultrasound devices utilized for inactivating E. coli in wastewaterUltrasonics Sonochemistry
    DOI: 10.1016/j.ultsonch.2017.04.017
  • Pohle, L.; Tatzko, S.; Panning-von Scheidt, L.; Wallaschek, J. (2017): High Order Sensitivity Analysis of a Mistuned Blisk Including Intentional Mistuning J. of Theoretical and Applied Mechanics 55, 1, 353-368
    DOI: 10.15632/jtam-pl.55.1.353
  • Sanabria, S. J.; Marhenke, T.; Furrer, R.; Neuenschwander, J. (2017): Calculation of volumetric sound field of pulsed air-coupled ultrasound transducers based on single plane measurementsIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control (IEEE UFFC), 65 (1), pp. 72-84
  • Wang, L.; Wielert, T.; Twiefel, J.; Jin, J.; Wallaschek, J. (2017): A Rod Type Linear Ultrasonic Motor Utilizing Longitudinal Traveling Waves: Proof of ConceptSmart Materials and Structures, 26 (2017) 085013
  • Willeke, S.; Panning-von Scheidt, L.; Wallaschek, J. (2017): Reduced Order Modeling of Mistuned Bladed Disks under RotationTechnische Mechanik, 37, 2-5, (2017), S. 314 – 325
    DOI: https://doi.org/10.24352/UB.OVGU-2017-107
  • Aboulfotoh, N.; Krack, M.; Twiefel, J.; Wallaschek, J. (2016): A Self-Resonant System-Experimental Investigations of Boundary and Operating ConditionsPAMM 16, 1, pp. 253-254, October
    DOI: 10.1002/pamm.201610115
  • Brouet, F.; Twiefel, J.; Wallaschek, J. (2016): Modal interaction in ultrasonic welding block sonotrodes induced by the mistuning of the material propertiesJournal of Sound and Vibration 318, pp. 1-13, October
    DOI: 10.1016/j.jsv.2016.06.021
  • Bruns, P.; Mojrzisch, S.; Twiefel, J.; Wallaschek, J.; Zimmermann, U.; Klie, W. (2016): Prüfstand mit piezoelektrischen Schwingungserzeugern zur Ermittlung der dynamischen Steifigkeit von ElastomerbauteilenForschung im Ingenieurwesen 80, 1-2, pp. 29-40 June
    DOI: 10.1007/s10010-016-0204-y
  • Förster, A.; Krack, M. (2016): An efficient method for approximating resonance curves of weakly-damped nonlinear mechanical systemsComputers & Structures, 169. Jg., S. 81-90
    DOI: 10.1016/j.compstruc.2016.03.003
  • Hentschel, O. P.; Bonhage. M.; Panning-von Scheidt, L.; Wallaschek, J.; Denk, M.; Masserey, P.-A. (2016): Analysis of an experimental setup for structural damping identificationJournal of Theoretical and Applied Mechanics 54, 1, 27-39
    DOI: 10.15632/jtam-pl.54.1.27
  • Hofmann, V.; Tarnowsky, A.; Rechel, M. (2016): At the Fingertip, wie Maschinen fühlenUnimagazin Ausgabe 3/4 2016, Robotik, von Mensch zu Maschine
  • Hofmann, V.; Twiefel, J.; Glukhovskoy, A.; Beringer, S.; Wurz, M. C.; Wallaschek, J.; Rissing, L. (2016): Intracochlear Stimulation of the Basilar MembraneBiomed Tech 61, p.179
    DOI: 10.1515/bmt-2016-5014
  • Hohl, A.; Wallaschek, J. (2016): A Method to Reduce the Energy Localization in Mistuned Bladed Disks by Application-Specific Blade Pattern ArrangementJournal of Engineering for Gas Turbines and Power 138, 9, pp. 092502-1 – 092502-10
    DOI: 10.1115/1.4032739
  • Krack, M.; Bergman, L. A.; Vakakis, A. F. (2016): On the efficacy of friction damping in the presence of nonlinear modal interactionsJournal of Sound and Vibration in press, pp. 12
    DOI: 10.1016/j.jsv.2016.01.039
  • Krack, M.; Panning-von Scheidt, L.; Wallaschek, J.: (2016): On the Interaction of Multiple Traveling Wave Modes in the Flutter Vibrations of Friction-Damped Tuned Bladed DisksJ. Eng. Gas Turbines Power 139(4), 042501
    DOI: 10.1115/1.4034650
  • Marhenke, T.; Twiefel, J.; Hasener, J. (2016): Transiente Ultraschallfeldvisualisierung von Transmissionsvorgängen an Platten auf Basis der RefraktovibrometrieTM – Technisches Messen 83, 10, pp. 580-592, October
    DOI: 10.1515/teme-2016-0003
  • Rosu, I.; Elias-Birembaux, H.L.; Lebon, F.; Lind, H.; Wangenheim, M. (2016): Experimental and Numerical Simulation of the Dynamic Frictional Contact between Aircraft Tire Rubber and a Rough SurfaceLubricants: 4(3), 29
    DOI: 10.3390/lubricants4030029
  • Saalbach, K.; Twiefel, J.; Wallaschek, J. (2016): 1945. Self-sensing cavitation detection capability of horn geometries for high temperature applicationJournal of Vibroengineering 18, 2, pp. 989-998, March
  • Schurzig, D.; Rau, T. S.; Wallaschek, J.; Lenarz, T.; Majdani, O. (2016): Determination of optimal excitation patterns for local mechanical inner ear stimulation using a physiologically-based modelBiomedical Microdevides 18, 2, Kapitel 36, April
    DOI: 10.1007/s10544-016-0061-3
  • Van Drunen, W. J.; Hofmann, V.; Twiefel, J.; Glukhovskoy, A.; Beringer, S.; Wurz, M. C.; Rau, T. S.; Wallaschek, J.; Rissing, L.; Lenarz, L.; Majdani, O. (2016): Track P. Medical Implants/Implant DevelopmentBiomedical Engineering 61, 1, pp. 179-199
    DOI: 10.1515/bmt-2016-5014
    ISBN: ISSN (online) 1862-278X, ISSN (print) 0013-5585
  • Wallaschek, J. (2016): Historical development of IWPMA: 10 years of research on piezoelectric materials and actuatorsArchive of Applied Mechanics 86, 10, pp. 1693-1695, October
    DOI: 10.1007/s00419-016-1157-1
  • Bonhage, M.; Pohle, L.; Panning-von Scheidt, L.; Wallaschek, J. (2015): Transient Amplitude Amplification of Mistuned BlisksJ. Eng. Gas Turbines Power 137, 112502-1
    DOI: 10.1115/1.4030278
  • Brouet, F.; Twiefel, J.; Wallaschek, J. (2015): Frequency veering and mode degeneration of a rectangular discPAMM 15 (1), 175-176
    DOI: 10.1002/pamm.201510078
  • Bruns, P.; Twiefel, J. (2015): Influences of Non-axial Process Loads on the Transducer and the Associated Mounting in Ultrasonic MachiningEnergy Harvesting and Systems
    DOI: 10.1515/ehs-2014-0022
    ISBN: ISSN (Online) 2329-8766, ISSN (Print) 2329-8774
  • Hentschel, O. P.; Panning-von Scheidt, L.; Wallaschek, J.; Denk, M. (2015): Introduction and Evaluation of a Damping Determination Method Based on the Short-Term Fourier Transform and Resampling (STFR)Journal of Theoretical and Applied Mechanics 53, 2, 395-407
    DOI: 10.15632/jtam-pl.53.2.395
  • Hofmann, V.; Kleyman, G.; Twiefel, J. (2015): Modeling and Experimental Investigation of a Periodically Excited Hybrid Energy-Harvesting GeneratorEnergy Harvesting and Systems
    DOI: 10.1515/ehs-2014-0043
  • Hofmann, V.; Twiefel, J. (2015): Optimization of a Piezoelectric Bending Actuator for a Tactile Virtual Reality DisplayEnergy Harvesting and Systems
  • Krack, M.; Bergman, L. A.; Vakakis, A. F. (2015): Motion Complexity in a Non-Classically Damped System with Closely Spaced Modes: From Standing to Traveling WavesProceedings of the Institution of Mechanical Engineers, Part K: Journal of Multibody Dynamics
    DOI: 10.1177/1464419315593431
  • Krack, M.; Bergman, L. A.; Vakakis, A. F. (2015): Absorption of Resonant Vibrations in Tuned Nonlinear Jointed StructuresASME Journal of Vibration and Acoustics 138 (2), 8 pp.
    DOI: 10.1115/1.4032000
  • Krack, M.; Bergman, L.A.; Vakakis, A.F. (2015): Global complexity effects due to local damping in a nonlinear system in 1:3 internal resonanceArchive of Applied Mechanics, 12 pp.
    DOI: 10.1007/s00419-015-1080-x
  • Saalbach, K.; Wurz, M. C.; Twiefel, J.; Rissing, L.; Wallaschek J. (2015): Custom Lithium Niobate Transducers for Detecting Material Distribution of Hybrid WorkpiecesEnergy Harvesting and Systems. Band 2, Heft 3-4, Seiten 137–142
    DOI: 10.1515/ehs-2014-0045
    ISBN: ISSN (Online) 2329-8766, ISSN (Print) 2329-8774
  • Stehle, T.; Eisseler, R.; Drewle, K.; Weiland, S.; Bruns, P.; Twiefel, J. (2015): Investigation of Process Forces of Ultrasonically Assisted Scratch TestsProceedings of the 3rd International Conference on Stone and Concrete Machining (ICSCM), November 2-3, Bochum, S. 137-145
    DOI: 10.13154/icscm.3.2015.137-145
  • Westermann, H.; Gorelik, I.; Rudat, J.; Moritz, C.; Neubauer, M.; Wallaschek, J; Höhn, O. (2015): A New Test Rig for Experimental Studies of Drillstring VibrationsSPE Drilling & Completion 30 (2), pp. 119-128
    DOI: 10.2118/176019-PA
  • Krack, M.; Böttcher, J. (2014): A Method for the Computational Assessment of the Damping Performance of Shape Memory AlloysSmart Materials and Structures 23, 10 pp.
    DOI: 10.1088/0964-1726/23/8/085010
  • Krack, M.; Panning-von Scheidt, L.; Wallaschek, J. (2014): On the Computation of the Slow Dynamics of Nonlinear Modes of Mechanical SystemsMechanical Systems and Signal Processing 42 (1-2), 71-87
    DOI: 10.1016/j.ymssp.2013.08.031
  • Krack, M.; Tatzko, S.; Panning-von Scheidt, L.; Wallaschek, J. (2014): Reliability Optimization of Friction-Damped Systems Using Nonlinear ModesJournal of Sound and Vibration 333, 2699–2712
    DOI: 10.1016/j.jsv.2014.02.008
  • Linke, T.; Wangenheim, M.; Lind, H.; Ripka, S. (2014): Experimental Friction and Temperature Investigation on Aircraft TiresTire Science and Technology: 42 (3), 116-144
    ISBN: ISSN (online): 0090-8657
  • Han, X.; Neubauer, M.; Wallaschek, J. (2013): Improved Piezoelectric Switch Shunt Damping Technique Using Negative CapacitanceJournal of Sound and Vibration, 332 (1), pp. 7-16
    DOI: 10.1016/j.jsv.2012.08.001
  • Krack, M.; Panning-von Scheidt, L.; Wallaschek, J. (2013): A High-Order Harmonic Balance Method for Systems with Distinct StatesJournal of Sound and Vibration 332 (21): 5476-5488
    DOI: 10.1016/j.jsv.2013.04.048
  • Krack, M.; Panning-von Scheidt, L.; Wallaschek, J. (2013): A Method for Nonlinear Modal Analysis and Synthesis: Application to Harmonically Forced and Self-Excited Mechanical SystemsJournal of Sound and Vibration 332 (25): 6798–6814
    DOI: 10.1016/j.jsv.2013.08.009
  • Krack, M.; Panning-von Scheidt, L.; Wallaschek, J.; Siewert, C.: Hartung, A. (2013): Reduced Order Modeling Based on Complex Nonlinear Modal Analysis and its Application to Bladed Disks with Shroud ContactJ. Eng. Gas Turbines Power 135 (10), 102502–102509
    DOI: 10.1115/1.4025002
  • Mojrzisch, S.; Wallaschek, J. (2013): Transient Amplitude Behavior Analysis of Nonlinear Power Ultrasonic Transducers with Application to Ultrasonic Squeeze film levitationJournal of Intelligent Material Systems and Structures, 24 (6), pp. 745-752
    DOI: 10.1177/1045389X12463460
  • Neubauer, M.; Han, X.; Wallaschek, J. (2013): On the Maximum Damping Performance of Piezoelectric Switching TechniquesJournal of Intelligent Material Systems and Structures, 24 (6), pp. 717-728
    DOI: 10.1115/SMASIS2011-5114
  • Neubauer, M.; Han, X.; Wallaschek, J. (2013): Energy Dissipation of Synchronized Switch Damping with Piezoceramics Using Negative CapacitanceSolid State Phenomena, Vol. 198, pp. 483-488
    DOI: 10.4028/www.scientific.net/SSP.198.483
    ISBN: 978-3-03785-637-6
  • Neubauer, M.; Wallaschek, J. (2013): Vibration Damping with Shunted Piezoceramics: Fundamentals and Technical ApplicationsMechanical Systems and Signal Processing, 36 (1), pp. 36-52
    DOI: 10.1016/j.ymssp.2011.05.011
  • Wallaschek, J.; Wies, B. (2013): Tyre Tread-Block Friction: Modeling, Simulation and Experimental ValidationVehicle System Dynamics, 51 (7), pp. 1017-1026
  • Westermann, H.; Neubauer, M.; Wallaschek, J. (2013): Modeling of a Nonlinear Vibration-Based Energy Harvesting System as a Duffing OscillatorDiffusion and Defect Data Pt.B: Solid State Phenomena, 198, pp. 663-668
    DOI: 10.4028/www.scientific.net/SSP.198.663
  • Zhao, S.; Mojrzisch, S.; Wallaschek, J. (2013): An Ultrasonic Levitation Journal Bearing able to Control Spindle Center PositionMechanical Systems and Signal Processing, 36 (1), pp. 168-181
    DOI: 10.1016/j.ymssp.2012.05.006
  • Zimmermann, M.; Ripka, S.; Kühbach, N.; Wallaschek, J. (2013): Beam model for tyre tread block dynamicsInternational Journal of Vehicle Noise and Vibration, Volume 9, Issue 3-4, pp. 312-333
    DOI: 10.1504/IJVNV.2013.055812
  • Heisel, U., Eisseler, R., Eber, R., Wallaschek, J., Twiefel, J., Huang, M. (2012): Ultrasonic-assisted machining of stoneProduction Engineering, 6 (2), pp. 587-594
    DOI: 10.1007/s11740-011-0330-1
  • Laborenz, J.; Krack M., Panning-von Scheidt, L.; Wallaschek, J.; Denk, M.; Masserey, P. (2012): Eddy Current Damper for Turbine Blading: Electromagnetic Finite Element Analysis and Measurement ResultsJ. Eng. Gas Turbines Power 134, 042504
    DOI: 10.1115/1.4004734
  • Mojrzisch, S.; Wallaschek, J. (2012): Transient amplitude behavior analysis of nonlinear power ultrasonic transducers with application to ultrasonic squeeze film levitationJournal of Intelligent Material Systems and Structures
    DOI: 10.1177/1045389X12463460
  • Mojrzisch, S.; Wallaschek, J.; Bremer, J. (2012): An Experimental Method for the Phase Controlled Frequency Response Measurement of Nonlinear Vibration SystemsPAMM Volume 12, Issue 1
    DOI: 10.1002/pamm.201210117
  • Neubauer, M. (2012): Shunted piezoceramics for vibration damping - Modeling, applications and new trendsSmart actuation and sensing systems - Recent advances and future challenges, InTech
    DOI: 10.5772/50609
    ISBN: 979-953-307-990-4
  • Neubauer, M.; Han, X.; Wallaschek, J. (2012): On the maximum damping performance of piezoelectric switching techniquesJournal of Intelligent Material Systems and Structures
    DOI: 10.1177/1045389X12445645
  • Neubauer, M.; Schwarzendahl, S. M.; Wallaschek, J. (2012): A new solution for the determination of the generalized coupling coefficient for piezoelectric systemsJournal of Vibroengineering, Vol. 14, Issue 1, pp. 105-110
    ISBN: ISSN: 1392-8716
  • Ripka, S.; Lind, H.; Wangenheim, M.; Wallaschek, J.; Wiese, K.; Wies, B. (2012): Investigation of Friction Mechanisms of Siped Tire Tread Blocks on Snowy and Icy SurfacesTire Science and Technology, TSTCA, Vol. 40, No. 1, pp. 1-24
  • Westermann, H.; Neubauer, M.; Wallaschek, J. (2012): Bandbreitensteigerung von piezoelektrischen Energy Harvesting Systemen durch MagnetkräfteAT – Automatisierungstechnik 60 (2012) 7, Oldenbourg Wissenschaftsverlag, pp. 384-391
    DOI: 10.1524/auto.2012.1011
  • Wurpts, W.; Twiefel, J. (2012): Analysis of Ultrasonic Vibro-Impact Systems with Equivalent Circuits and the Harmonic Balance MethodSensors and Actuators A: Physical, Elsevier
    DOI: 10.1016/j.sna.2012.10.007
  • Zhao, S.; Mojrzisch, S.; Wallaschek, J. (2012): An ultrasonic levitation journal bearing able to control spindle center positionMechanical Systems and Signal Processing
    DOI: 10.1016/j.ymssp.2012.05.006
  • Heisel, U.; Eber, R.; Wallaschek, J.; Twiefel, J. (2011): Kinematic model for ultrasonic-assisted manufacturing of bore holes with undefined cutting edgesJournal of Advanced Materials Research 223 (2011), pp. 794 – 803
    DOI: 10.4028/www.scientific.net/AMR.223.794
  • Neubauer, M.; Han, X.; Schwarzendahl, S. M. (2011): Enhanced switching law for synchronized switch damping on inductor with bimodal excitationJournal of Sound and Vibration, Vol. 330, Number 2, pp. 2707-2720
    DOI: 10.1016/j.jsv.2011.01.003
  • Neubauer, M.; Wallaschek, J. (2011): Vibration damping with shunted piezoceramics: Fundamentals and technical applicationsMechanical Systems and Signal Processing (MSSP), Vol. 36, Issue 1
    DOI: 10.1016/j.ymssp.2011.05.011
  • Wallaschek, J.; Renner, A. (2011): Theoretical and Experimental Investigations of Piezoelectrically Excited Travelling Waves in Cylindrical TubesProc. Appl. Math. Mech. 11 (2011), pp. 641 - 642
    DOI: 10.1002/pamm.201110310
  • Krack, M.; Secanell, M.; Mertiny, P. (2010): Cost Optimization of Hybrid Composite Flywheel Rotors for Energy StorageStructural and Multidisciplinary Optimization, 41(5), S. 779‐796
    DOI: 10.1007/s00158-009-0469-y
  • Krack, M.; Secanell, M.; Mertiny, P. (2010): Cost optimization of a Hybrid Composite Flywheel Rotor with a Split-Type Hub using combined analytical/numerical Models In: Structural and Multidisciplinary Optimization, S. 1-17.
  • Laborenz, J.; Siewert, C.; Panning, L.; Wallaschek, J.; Gerber, C.; Masserey, P.-A. (2010): Eddy Current Damping - A Concept Study For Steam Turbine BladingJ. Eng. Gas Turbines Power 132(5), 052505-1-052505-7
    DOI: 10.1115/1.3205032
  • Neubauer, M.; Krack, M.; Wallaschek, J. (2010): Parametric Studies on the Harvested Energy of Piezoelectric Switching TechniquesJournal Smart Materials and Structures, Vol. 19, Number 2.
    DOI: 10.1088/0964-1726/19/2/025001
  • Neubauer, M.; Renner, A.; Twiefel, J. (2010): Stability Analysis of a Disc Brake with Piezoelectric Self-Sensing Technique SAE International Journal of Passenger Cars – Mechanical Systems, Vol. 2, No. 2, pp. 24-31
    DOI: 10.4271/2009-01-3034
    ISBN: 1946-4002
  • Schiedeck, F.; Mojrzisch, S.; Wallaschek, J. (2010): Prestressing piezoelectric actuators by using superelastic shape memory alloysJ. Korean Phys. Soc., 57(4):889–891
    ISBN: ISSN: 0374-4884
  • Siewert, C.; Panning, L.; Wallaschek, J.; Richter, C. (2010): Multiharmonic Forced Response Analysis of a Turbine Blading Coupled by Nonlinear Contact ForcesJ. Eng. Gas Turbines Power 132(8), 082501-1-082501-9
    DOI: 10.1115/1.4000266
  • Ripka, S.; Gäbel, G.; Wangenheim, M. (2009): Dynamics of a siped tire tread block – experiment and simulationTire Science and Technology, TSTCA, Vol. 37, No. 4, pp. 323-339
  • Verheyde, B.; Rombouts, M.; Vanhulsel, A.; Havermans, D.; Meneve, J.; Wangenheim, M. (2009): Influence of surface treatment of elastomers on their frictional behaviour in sliding contactWear 266, Nr. 3/4, S. 468-475
    DOI: 10.1016/j.wear.2008.04.040
  • Panning, L.; Sextro, W.; Popp, K. (2003): Spatial Dynamics of Tuned and Mistuned Bladed Disks with Cylindrical and Wedge Shaped Friction DampersInt J. of Rotating Machinery (9)3, 219-228
    DOI: 10.1155/S1023621X03000198
  • Popp, K.; Panning, L.; Sextro, W. (2003): Vibration Damping by Friction Forces - Theory and ApplicationsJ. Vibration and Control (9)3-4, 419-448
    DOI: 10.1177/107754603030780

Konferenz (reviewed)

  • Brinkmann, K.; Hoffmann, T.; Panning-von Scheidt, L.; Stüer, H. (2023): Transient resonance passage of a mistuned bladed disk with and without underplatform dampersProceedings of 15th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics (ETC15), Budapest, April 24-28, 2023.
  • Brinkmann, K.; Panning‐von Scheidt, L.; Stüer, H. (2023): Geometrically Mistuned Blisks: Strain Gauge and Tip Timing Vibration Measurements of Rotating Blades with and Without Underplatform DampersRinderknecht, S.; Schüßler, B.; Schwarz, S. (Hrsg.) (2023): Proceedings of SIRM 2023 - The 15th European Conference on Rotordynamics. Darmstadt, Germany, 22.-24.02.2023
    DOI: 10.26083/tuprints-00024057
  • Jäger, F.; Panning-von Scheidt, L.; Wallaschek, J. (2023): Experimental and Numerical Analysis of Rotational Speed Influence on the Nonlinear Dynamic of Turbine Blades with Shroud CouplingProceedings of the International Gas Turbine Congress 2023, November 26 - Dezember 1, Kyoto, Japan, 2023
  • Schlesier, K.-D.; Panning‐von Scheidt, L.; Ehehalt, U.; Levin Rojas, R. (2023): Investigations on Laterally Coupled Rotor‐Blade‐VibrationsIn: Rinderknecht, S.; Schüßler, B.; Schwarz, S. (Hrsg.) (2023): Proceedings of SIRM 2023 - The 15th European Conference on Rotordynamics. Darmstadt, Germany, 22.-24.02.2023
    DOI: 10.26083/tuprints-00024057
  • Strehlau, U.; Langheinrich, D.; Beirow, B.; Xiao, Y.; Panning‐von Scheidt, L. (2023): Geometrically Mistuned Blisks: Assessment of Geometric Uncertainties and Finite‐Element Mesh MorphingRinderknecht, S.; Schüßler, B.; Schwarz, S. (Hrsg.) (2023): Proceedings of SIRM 2023 - The 15th European Conference on Rotordynamics. Darmstadt, Germany, 22.-24.02.2023
    DOI: 10.26083/tuprints-00024057
  • Berthold, R.; Wiese, M; Raatz, A. (2022): Investigation of Lateral Compression Effects in Fiber Reinforced Soft Pneumatic Actuators2022 International Conference on Electrical, Computer, Communications and Mechatronics Engineering (ICECCME)
    DOI: 10.1109/ICECCME55909.2022.9988565
  • Förster, A.; Panning-von Scheidt, L. (2022): Interface Reduction in an Equivalent Linearization Algorithm for Nonlinearly Coupled Systems Under Random ExcitationASME 2022 Turbo Expo
    DOI: 10.1115/GT2022-78367
  • Kiss, T.; Terstyanszky, G.; Arjun, R.; Sardesai, S.;Goertz, MD; Wangenheim, M. (2022): Supply Chain Simulation as a Service to Increase Adaption Capability in Manufacturing2022 Annual Modeling and Simulation Conference (ANNSIM)
  • Maroldt, N.; Schwerdt, L.; Berger, R.; Panning-von Scheidt, L.; Rolfes, R.; Wallaschek, J.; Seume, J. R. (2022): Reduced Order Modeling of Forced Response in a Multistage Compressor Under Mistuning and AerocouplingASME paper GT2022-81090, Int. Gas Turbine & Aeroeng. Congress and Exh., Rotterdam, 2022, pp. 1-12
    DOI: http://dx.doi.org/10.1115/GT2022-81090
  • Schwerdt, L.; Maroldt, N.; Panning-von Scheidt, L.; Wallaschek, J.; Seume, J. (2022): An Improved Reduced Order Model for Bladed Disks Including Multistage Aeroelastic and Structural CouplingProceedings of Global Power and Propulsion Society GPPS Chania22, 18th–20th September, 2022.
    DOI: 10.33737/gpps22-tc-106
  • Amer, M.; Paehr, M.; Panning-von Scheidt, L.; Seume, J.; Schmied, J. (2021): Determining the influence of casing vibrational behaviour on rotordynamicsPaper ID-021, SIRM 14th International Conference on Dynamics of Rotating Machines, Gdańsk, Poland, 17th –19th February, 2021
  • Berthold, R.; Bartholdt, M. N.; Wiese, M.; Kahms, S.; Spindeldreier S.; Raatz, A. (2021): A Preliminary Study of Soft Material Robotic Modelling: Finite Element Method and Cosserat Rod Model9th International Conference on Control, Mechatronics and Automation (ICCMA)
    DOI: doi: 10.1109/ICCMA54375.2021.9646194
  • Förster, A.; Panning-von Scheidt, L. (2021): Calculation of Nonlinear Systems under Narrow Band Excitation Using Equivalent Linearization and Path ContinuationASME paper GT2021-58437, Int. Gas Turbine & Aeroeng. Congress and Exh., virtual
    DOI: 10.1115/GT2021-58437
  • Jäger, F.; Kaptan, F.; Panning-von Scheidt, L.; Wallaschek, J. (2021): Development of a Multi-Shaker-Control to Investigate the Influence of the Interblade Phase Angle on Frictionally Damped Turbine BladesASME paper GT2021-59272, Int. Gas Turbine & Aeroeng. Congress and Exh., virtual
    DOI: https://doi.org/10.1115/GT2021-59272
  • Arndt, M., Long, Y., Dencker, F., Reimann, J., Twiefel J., Wurz, M. (2020): Novel Piezoelectric Force Sensor Array for Investigation of Ultrasonic Wire BondingElectronic Components and Technology Conference (ECTC), Jun. 3-30, Orlando, USA, pp.276-283
    DOI: 10.1109/ECTC32862.2020.00053
  • Carassale, L.; Denoël, V.; Martel, C.; Panning-von Scheidt, L. (2020): Identification of the essential features of the transient amplification of mistuned systems.Paper GT2020-15693, Proceedings of the ASME 2020 Turbo Expo Conference (2020); ASME Turbo Expo: Turbomachinery Technical Conference & Exhibition, London, UK, September 2020
    DOI: https://doi.org/10.1115/GT2020-15693
  • Förster, A.; Panning-von Scheidt, L.; Wallaschek,J. (2020): Equivalent Linearization of Bladed Disk Assemblies with Friction Nonlinearities Under Random ExcitationASME 2020 Turbo Expo
    DOI: 10.1115/GT2020-14264
  • Hoffmann, T.; Panning-von Scheidt, L.; Wallaschek, J. (2020): Single Nodal Diameter Excitation of Turbine Blades: Experimental and Theoretical StudyPaper GT2020-14282, Proceedings of the ASME 2020 Turbo Expo Conference (2020); ASME Turbo Expo: Turbomachinery Technical Conference & Exhibition, London, UK, September 2020
    DOI: https://doi.org/10.1115/GT2020-14282
    ISBN: 978-0-7918-8423-2
  • Jonkeren, M.; Hörmeyer, J.; Bohne, T.; Rolfes, R. (2020): Modellierung der Schallabstrahlung des Turmes einer WindenergieanlageFortschritte der Akustik - DAGA 2020, 46. Jahrestagung für Akustik
    ISBN: 978-3-939296-17-1
  • Schmelt, A.S.; Li, Z.; Marhenke, T.; Hasener, J.; Twiefel, J. (2020): Aussagefähigkeit von Fehlstellenimitaten in der ZfPTagungsband DAGA 2020 - 46. Jahrestagung für Akustik | Datei |
    ISBN: 978-3-939296-17-1
  • Schwerdt, L.; Panning-von Scheidt, L.; Wallaschek, J. (2020): A Model Order Reduction Method for Bladed Disks with Large Geometric Mistuning using a Partially Reduced Intermediate System ModelPaper GT2020-14199, Proceedings of the ASME 2020 Turbo Expo Conference (2020); ASME Turbo Expo: Turbomachinery Technical Conference & Exhibition, London, UK, September 2020
  • A. S. Schmelt; E. C. Fischer; V. Hofmann; J. Twiefel; M. C. Wurz (2019): Vibro-tactile displays for stimulating surface impressionsPROCEEDINGS of the 23rd International Congress on Acoustics 9 to 13 September 2019 in Aachen, Germany, pp. 1000-1007 | Datei |
    ISBN: ISSN 2226-7808 and 2415-1599 ISBN 978-3-939296-15-7
  • A. S. Schmelt; T. Marhenke; J. Twiefel (2019): Identifying objects in a 2D-space utilizing a novel combination of a re-radiation based method and of a difference-image-methodPROCEEDINGS of the 23rd International Congress on Acoustics 9 to 13 September 2019 in Aachen, Germany, pp. 8156-8163 | Datei |
    ISBN: ISSN 2226-7808 and 2415-1599 ISBN 978-3-939296-15-7
  • Leenders, Arne; Kahms, Stephanie; Wangenheim, Matthias (2019): Contact of viscoelastic siped tyre tread blocks on gravel roadProceedings of the 7th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2019)
    DOI: 10.7712/120117
    ISBN: 978-618-82844-8-7
  • Schneider, F., Long, Y., Ohrdes, H., Twiefel, J., Brökelmann, M., Hunstig, M., Venkatesh, A., Hermsdorf, J., Kaierle, S., Overmeyer, L. (2019): Effect of laser assistance in ultrasonic copper wire bondingLasers in Manufacturing
  • Schwerdt. L.; Berger, R.; Panning-von Scheidt, L.; Gebhardt, C.G.; Wallaschek, J.; Rolfes, R. (2019): Probabilistic Study of Blend Repairs on an Axial Compressor Blisk using the Subset of Nominal Modes MethodProc. IGTC Int. Gas Turbine Congress, Tokyo, 2019
  • A. S. Schmelt, E. C. Fischer, M. C. Wurz and J. Twiefel (2018): Solid State Joint Actuator for a Vibro Tactile Line Display,ACTUATOR 2018; 16th International Conference on New Actuators, Bremen, Germany, 2018, pp. 1-4VDE Verlag | Datei |
    ISBN: 978-3-8007-4675-0
  • Behrens, B.A., Chugreev, A.; Matthias, T.; Nothdurft, S.; Hermsdorf, J.; Kaierle, S.; Ohrdes, H.; Twiefel, J.; Wallaschek, J.; Mildebrath, M.; Hassel, T. (2018): Investigation of the composite strength of hybrid steel-steel semi-finished products manufactured by laser beam welding and friction welding5TH INTERNATIONAL CONFERENCE of recent trends in structural materials (COMAT), 14.-16.11.2018, Pilsen
    DOI: 10.1088/1757-899X/461/1/012049
  • Förster, A.; Panning-von Scheidt, L.; Wallaschek, J. (2018): Approximate Solution of the Fokker–Planck Equation for a Multidegree of Freedom Frictionally Damped Bladed Disk Under RandomASME paper GT2018-75755, Int. Gas Turbine & Aeroeng. Congress and Exh., Oslo, 2018
  • Gorelik, I.; Wiese, M.; Bürger, L.; Tatzko, S.; Hohl, A.; Reckmann, H.; Wallaschek, J. (2018): Application of the Transfer Matrix Method for the Analysis of Lateral Vibrations of Drillstrings with Parameter Uncertainties Model Validation and Uncertainty Quantification, Volume 3, Proceedings of the 36th IMAC, February 12-15, Orlando (FL), Society of Experimental Mechanics Series, Springer International Publishing, 2018
  • Hartung, A.; Hackenberg, H.-P.; Krack, M.; Gross, J.; Heinze, T.; Panning-von Scheidt, L. (2018): Rig and Engine Validation of the Nonlinear Forced Response Analysis Performed by the Tool OrAgLASME paper GT2018-75186, Int. Gas Turbine & Aeroeng. Congress and Exh., Oslo, 2018
  • Heinze, T.; Panning-von Scheidt, L.; Wallaschek, J.; Hartung, A. (2018): Rotational Speed-Dependent Contact Formulation for Nonlinear Blade Dynamics PredictionASME paper GT2018-75290, Int. Gas Turbine & Aeroeng. Congress and Exh., Oslo, 2018
  • Hüls, M.; Panning-von Scheidt, L., Wallaschek, J. (2018): Influence of Geometric Design Parameters onto Vibratory Response and HCF Safety for Turbine Blades with Friction DamperASME paper GT2018-75363, Int. Gas Turbine & Aeroeng. Congress and Exh., Oslo, 2018
  • Kaptan, F.; Panning-von Scheidt, L.; Wallaschek, J. (2018): Numerical and Experimental Study of Shrouded Blade Dynamics Considering Variable Operating PointsASME paper GT2018-76692, Int. Gas Turbine & Aeroeng. Congress and Exh., Oslo, 2018
  • Long, Y., He, B., Cui, W., Zhuang, X., Twiefel, J. (2018): Molecular dynamics simulation of microwelds formation and breakage during ultrasonic copper wire bondingIEEE 68th Electronic Components and Technology Conference
    DOI: 10.1109/ECTC.2018.00219
  • Schlesier, K.-D.; Panning-von Scheidt, L., Wallaschek, J. (2018): Investigations on Transient Amplitude Amplification by Applying Intentional MistuningASME paper GT2018-75514, Int. Gas Turbine & Aeroeng. Congress and Exh., Oslo, 2018
  • Schwerdt, L.; Willeke, S.; Panning-von Scheidt, L.; Wallaschek, J. (2018): Reduced-Order Modeling of Bladed Disks Considering Small Mistuning the Disk SectorsProceedings of the ASME Turbo Expo: Turbomachinery Technical Conference and Exposition, 2018
    DOI: 10.1115/GT2018-76610
  • Willeke, S.; Schwerdt, L.; Panning-von Scheidt, L., Wallaschek, J. (2018): Intentional Response Reduction by Harmonic Mistuning of Bladed Disks with Aerodynamic DampingASME paper GT2018-76601, Int. Gas Turbine & Aeroeng. Congress and Exh., Oslo, 2018
  • Bothe, S.; Wangenheim, M. (2017): Application of a Multi-Scale Hysteresis Friction Model to Aircraft Tires During LandingProceedings International Mechanical Engineering Congress & Exposition 2017, IMECE2017-71241
  • Bruns, P.; Twiefel, J.; Wallaschek, J. (2017): Modeling of ultrasonic processes utilizing a generic software frameworkIOP Conference Series: Materials Science and Engineering, Vol. 211. No. 1, IOP Publishing, 2017
  • Burgwitz, M.; Bothe, S.; Wangenheim, M. (2017): Application of a Fractional Viscoelastic Material Model to Rubber in Comparison to a Linear ApproachProceedings ASME International Mechanical Engineering Congress & Exposition, IMECE2017-71380
  • Fischer, E.; Glukhovskoy, A.; Schmelt, A., S.; Twiefel, J.; Wurz, M.,C. (2017): Mikroaktorik für ein Taktiles DisplayProceedings of the MikroSystemTechnik Kongress 2017, October 23–25, 2017 München, S. 515-518
  • Heinze, T.; Panning-von Scheidt, L.; Wallaschek, J. (2017): Nodal diameter-dependent modal damping method for nonlinear blade dynamics prediction considering variable rotational speedProceedings of ASME Turbo Expo 2017, 26-30 June, Charlotte, NC, USA
  • Hoffmann, T.; Panning-von Scheidt, L.; Wallaschek, J. (2017): Modelling friction characteristics in turbine blade vibrations using a Fourier series expansion of a real friction hysteresis. X International Conference on Structural Dynamics, EURODYN 2017, Rome, Italy, Procedia Engineering 199 (2017) 669–674, 2017
    DOI: 10.1016/j.proeng.2017.09.586
  • Hofmann, V.; Twiefel, J. (2017): Cultivator Optimization for Ultrasonic Friction Reduction using the Transfer Matrix Modeling MethodThe International Workshop on Piezoelectric Materials and Applications in Actuators, Falls Church, VA, USA
  • Long, Y.; Dencker, F.; Isaak, A.; Li, C.; Schneider, F.; Hermsdor, J.; Wurz, M.; Twiefel, J.; Wallaschek, J. (2017): Analysis of the Wire/Substrate Interface during Ultrasonic Bonding ProcessIEEE CPMT Symposium Japan (ICSJ), Nov 20-22, 2017 Kyoto, Japan, S. 203-206
  • Long, Y.; Dencker, F.; Isaak, A.; Schneider, F.; Hermsdor, J.; Wurz, M.; Twiefel, J. (2017): Visualization of Oxide Removal during Ultrasonic Wire Bonding Process19th IEEE Electronics Packaging Technology Conference (EPTC), Dec 6-9, 2017 Singapore, S. 1-4
  • Marhenke, T.; Twiefel, J.; Hasener , J.; Wallaschek, J. (2017): Ermittlung mechanischer Kennwerte von Holzwerkstoffen mittels Modal-UpdatingProceedings der 35. CADFEM Simulation Conference, November 15-17, Koblenz, Deutschland
  • Marhenke, T.; Twiefel, J.; Hasener , J.; Wallaschek, J. (2017): Determination of Mechanical Properties of Wood Based Materials using Modal UpdatingProceedings of the IEEE International Ultrasonics Symposium (IEEE IUS), September 6-9, Washingstion D.C., USA, 2017
  • Nothdurft, S.; Springer, A.; Kaierle, S.; Mildebrath, M.; Maier, H. J.; Hassel, T.; Ohrdes, H.; Twiefel, J.; Wallaschek, J.; Overmeyer, L. (2017): Influence of beam position and ultrasonic amplitude on the microstructure of laser welded dissimilar steel-steel jointsInternational Congress on Applications of Lasers & Electro-Optics (ICALEO®), 22.-26.10.2017, Atlanta
  • Schneider, F.; Long, Y.; Ohrdes, H.; Twiefel, J.; Brökelmann, M.; Hunstig, M.; Venkatesh, A.; Hermsdorf, J.; Kaierle, S.; Overmeyer, L (2017): Effect of laser assistance in ultrasonic copper wire bonding Lasers in Manufacturing Conference 2017
  • Schwerdt, L.; Hauptmann, T.; Kunin, A.; Seume, J.R.; Wallaschek, J.; Wriggers, P.; Panning-von Scheidt, L.; Löhnert, S. (2017): Aerodynamical and Structural Analysis of Operationally Used Turbine BladesIn: Procedia CIRP 59, 77–82
    DOI: 10.1016/j.procir.2016.09.023
  • Schwerdt, L.; Panning-von Scheidt, L.; Wallaschek, J.; Berger, R.; Rolfes, R; Keller, C.; Seume, J. (2017): Influence of Blade Repairs on Compressor Blisk Vibration considering Aerodynamic Damping and MistuningProceedings of Shanghai 2017 Global Power and Propulsion Forum, GPPS-2017-0142
  • Willeke, S.; Keller, C.; Panning-von Scheidt, L.; Seume, J.R.; Wallaschek, J. (2017): Reduced Order Modeling of Mistuned Bladed Disks Considering Aerodynamic Coupling and Mode Family Interaction12th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics (ETC12), Stockholm, April 3-7, 2017
  • Willeke, S.; Panning-von Scheidt, L.; Wallaschek, J. (2017): Reduced Order Modeling of Mistuned Bladed Disks Under Rotation12th International Conference on Vibrations in Rotating Machines (SIRM 2017), Graz, Austria, February 15-17, 2017
  • Aboulfotoh, N.; Twiefel J. (2016): A Study on the Influence of Design Parameters on the Power Output Characteristic of Piezoelectric Vibration Energy HarvesterProceedings of the 27th International Conference on Noise and Vibration Engineering, ISMA, Leuven
  • Bruns, P.; Twiefel, J.; Wallaschek, J. (2016): Experimental and Theoretical Investigation of a Vibro-Impact Process Utilizing an in situ Capacitive Distance MeasurementProceedings of ISMA2016 International Conference on Noise and Vibration Engineering, September 19-21, Leuven, Belgium
  • Heinze, T.; Panning-von Scheidt, L.; Wallaschek, J.; Hartung, A. (2016): A Taylor Series Expansion Approach for Nonlinear Blade Forced Response Prediction Considering Variable Rotational SpeedPaper No. GT2016-56375, ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition, Seoul, South Korea, June 13–17, 2016
    DOI: 10.1115/GT2016-56375
  • Krack, M.; Panning-von Scheidt, L.; Wallaschek, J. (2016): On the Interaction of Multiple Traveling Wave Modes in the Flutter Vibrations of Friction-Damped Tuned Bladed DisksPaper No. GT2016-56126, ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition, Seoul, South Korea, June 13–17, 2016
    DOI: 10.1115/GT2016-56126
  • Long, Y.; Dencker, F.; Schneider, F.; Emde, B.; Li, C.; Hermsdorf, J.; Wurz, M.; Twiefel, J. (2016): Investigations on the Oxide Removal Mechanism during Ultrasonic Wedge-Wedge Bonding ProcessIEEE 18th Electronics Packaging Technology Conference, November 30 - December 3, Singapore, Southeast Asia, pp. 405-410
  • Long, Y.; Dencker, F.; Wurz, M.; Feldhoff, A.; Twiefel, J. (2016): A deeper understanding on the motion behaviors of wire during ultrasonic wedge-wedge bonding processInternational Symposium on Microelectronics, October 10-13, Pasadena, USA, pp. 427-432
  • Marhenke, T.; Twiefel, J.; Wallaschek, J. (2016): Zerstörungsfreie Delaminationserkennung mittels luftgekoppeltem UltraschallTagungsband der 14. Vibrometerkonferenz der Polytec GmbH: Einsatz Optischer Schwingungsmesstechnik in Industrie und Forschung, November 22-23, Waldbronn, Germany
  • Marhenke, T.; Twiefel, J.; Wallaschek, J. (2016): Delaminationserkennung in Holzwerkstoffen auf Basis der UltraschalltransmissionsmessungTagungsband des 3. Workshop des Fachausschusses Ultraschall der DEGA e.V.: Messtechnische Anwendungen von Ultraschall, June 20-22, Drübeck, Germany
  • Ohrdes, H.; Fischer, H.; Twiefel, J.; Wallaschek J. (2016): Experimental investigation of ultrasonic fluid mixing as assistance for a laser welding processProceedings of ISMA2016: International Conference on Noise and Vibration Engineering, September 19-21, Leuven, Belgium, pp. 1595-1603
  • Reul, A.; Schwerdt, L.; Rinderknecht, S. (2016): Fast Multidisciplinary Design Optimization in the Development of Mechatronic SystemsProceedings of ASME 2016 International Mechanical Engineering Congress and Exposition. November 11, Phoenix, USA
    DOI: 10.1115/IMECE2016-65599
  • Schmidt, M.;Reinke, P.; Beckmann, T.; Saalbach, K. A.; Wallaschek, J.; Twiefel, J.; Bai, F. (2016): Numerical and experimental investigation of the levitation and flow created by ultrasonic fields in narrow gaps5th Micro and Nano Flows Conference
  • Wielert, T.; Vagapov, A.; Twiefel, J.; Mešan, I.; Bott, K. (2016): Performance of a Novel Small Component Conveyor Utilizing Flexural Travelling WavesConference Proceedings of ACTUATOR 2016, 15th International Conference on New Actuators, June 13-15, Bremen, Germany
  • Zimmermann, M.; Wangenheim, M. (2016): Friction behaviour of surface textured elastomeric seals in pneumatic actuatorsProc. 23rd International Conference on Fluid Sealing, Manchester (UK)
  • Bruns, P.; Mojrzisch, S.; Twiefel, J.; Wallaschek, J.; Klie, W.; Zimmermann, U. (2015): Piezoelektrische Schwingungserzeuger zur Ermittlung der dynamischen Steifigkeiten von ElastomerbauteilenVDI Mechatroniktagung, Dortmund
  • Bruns, P.; Twiefel, J.; Wallschek, J. (2015): Investigations on the Mounting Position of Ultrasonic TransducersThe 12th International Workshop on Piezoelectric Materials and Applications in Actuators, Vilnius
  • Ertz, G.; Hrynik, T.; Lafleur, D.; Mertiny, P.; Secanell, M.; Wagner, N. (2015): Design of Low-Cost Flywheel Energy Storage SystemsCAMX, October 26-29, Dallas, USA
  • Ertz, G.; Krack, M.; Twiefel, J.; Secanell, M.; Mertiny, P. (2015): Skalierbarer Demonstrator für Mobile SchwungradspeichersystemeVDI Mechatroniktagung, März 12-13, Dortmund, Deutschland
  • Ertz, G.; Twiefel, J.; Secanell, M.; Mertiny, P. (2015): Design and Manufacturing of a Scalable Composite Flywheel Demonstrator for Mobile Energy Storage SystemCANCOM, August 17-20, Edmonton, Canada
  • Gorelik, I.; Höhn O.; Neubauer, M.; Wallaschek, J. (2015): Model and Method for a Time-Efficient Analysis of Lateral Drillstring DynamicsProceedings of ASME Turbo Expo 2015: Turbine Technical Conference and Exposition, June 15-19, Montréal, Canada
  • Hohl, A.; Wallaschek, J. (2015): A Method to Reduce the Energy Localization in Mistuned Bladed Disks by Application-Specific Blade Pattern ArrangementASME Turbo Expo 2015: Turbine Technical Conference and Exposition, June 15-19, Montréal, Canada
  • Long, Y.; Twiefel, J.; Roth, J.; Wallaschek, J. (2015): Real-time observation of interface relative motion during ultrasonic wedge-wedge bonding processIn International Symposium on Microelectronics, IMAPS (International Microelectronics, Assembly and Packaging Society), pp. 419-424
  • Wangenheim, M.; Haupt, F.; Engelmann, S. (2015): Better Learning Success in Engineering MechanicsProc. of the ASME 2015 International Mechanical Engineering Congress & Exposition, IMECE2015, Houston, Texas (USA)
  • Weinstein, M.; Ille, I.; Mojrzisch, S.; Twiefel, J.; Wallaschek, J. (2015): Resonance Frequency Tuning of Piezoelectric Ultrasonic Transducers Using Resonant Switching ConvertersThird International Academic Conference of Postgraduates, NUAA, Nanjing, China
  • Wielert, T.; Twiefel, J.; Mešan, I.; Bott, K. (2015): Kleinteileförderung mit einem ultraschallbasierten WanderwellentransportsystemTagungsband Mechatronik 2015
    ISBN: 978-3-00-048814-6
  • Willeke, S.; Verstraete, T. (2015): Adjoint Optimization of an Internal Cooling Channel U-BendPaper No. GT2015-43423, ASME Turbo Expo 2015: Turbine Technical Conference and Exposition, Montreal, Quebec, Canada, June 15-19, 2015
    DOI: 10.1115/GT2015-43423
  • Gorelik, I.; Höhn O.; Neubauer, M.; Wallaschek, J. (2014): Drillstring Dynamics: Real-Time Calculation of Safe Operating Regions in Inclined Boreholes Using the Shooting Method8th European Nonlinear Oscillations Conference (ENOC), July 6-11, Vienna, Austria
  • Hentschel, O.; Panning-von Scheidt, L.; Wallaschek, J.; Denk, M. (2014): Introduction and Evaluation of a Frequency Domain Method for Damping DeterminationMSM Conference 2014, Opole, Poland
  • Hentschel, O.; Panning-von Scheidt, L.; Wallaschek, J.; Denk, M.; Masserey P.-A. (2014): Influential Parameters on Structural Damping Values of Turbine BladesPaper No. GT2014-25656, ASME Turbo Expo 2014: Turbomachinery Technical Conference and Exposition, Düsseldorf, Germany, June 16-20, 2014
    DOI: 10.1115/GT2014-25656
  • Herzog, A.; Krack, M.; Panning-von Scheidt, L.; Wallaschek, J. (2014): Comparison of two Widely-Used Frequency-Time Domain Contact Models for the Vibration Simulation of Shrouded Turbine BladesPaper No. GT2014-26226, ASME Turbo Expo 2014: Turbomachinery Technical Conference and Exposition, Düsseldorf, Germany, June 16-20, 2014
    DOI: 10.1115/GT2014-26226
  • Krack, M. (2014): Nonlinear modes and model reduction of structures with contact interfaces. Vortrag in panel session zuEfficient Dynamic Analysis of Nonlinear Structures”, ASME Turbo Expo, Düsseldorf, Germany
  • Lind, H.; Wangenheim, M. (2014): A multi-scale approach for estimation of real contact area and frictional behavior of rubber sliding on rough surfacesProceedings of the 11th World Congress on Computational Mechanics, July 20-25, Barcelona, Spain
  • Lind, H.; Wangenheim, M. (2014): Prediction of contact area and frictional behaviour of rubber on rigid rough surfacesProc. of the ASME 2014 International Mechanical Engineering Congress & Exposition, IMECE2014, Montréal, Québec, Canada
  • Neubauer, M. (2014): Optimized Usage of Piezoelectric Material for Shunt Damping TechniquesForum Acusticum, Krakow, Poland
  • Neubauer, M.; Wallaschek, J. (2014): An adaptive Tuned Mass Damper Using Friction BarsMSM Conference 2014, Opole, Poland
  • Pohle, L.; Panning-von Scheidt, L.; Wallaschek, J., Aschenbruck, J.; Seume, J.R. (2014): Dynamic Behavior of a Mistuned Air Turbine: Comparison Between Simulations and MeasurementsPaper No. GT2014-26025, ASME Turbo Expo 2014: Turbomachinery Technical Conference and Exposition, Düsseldorf, Germany, June 16-20, 2014
    DOI: 10.1115/GT2014-26025
  • Roth, J.; Meyer, B.; Thomschke, S. (2014): Laser Scanning Unit for Light Symbol ProjectionVision 2014 -Vehicle and Infrastructure Safety Improvement in Adverse Conditions and Night Driving, SIA Proceedings; Versailles, France
  • Tatzko, S.; Panning-von Scheidt, L.; Wallaschek, J. (2014): Dynamics of Bladed Disks with Frictional Coupling and Alternate Mistuning PatternPaper No. IMECE2014-38263, Proceedings of the ASME 2014 International Mechanical Engineering Congress and Exposition (IMECE), November 14-20, 2014, Montreal, Canada
    DOI: 10.1115/IMECE2014-38263
  • Wangenheim, M. (2014): Directional Evaluation of Surface Topography Parameters and Dry FrictionProc. of the ASME 2014 International Mechanical Engineering Congress & Exposition, IMECE2014, Montréal, Québec (Canada)
  • Westermann, H.; Höhn O.; Neubauer, M.; Wallaschek, J. (2014): Application of the Asymptotic-Numerical Method for the Analysis of Lateral Drillstring VibrationsEuropean Nonlinear Oscillations Conference (ENOC), July 6-11, Vienna, Austria
  • Westermann, H.; Neubauer M.; Höhn, O.; Wallaschek, J. (2014): Modeling of the Interaction of Lateral and Torsional Vibrations in Oilwell Drillstring VibrationsInternational Petroleum Technology Conference (IPTC), January 20-22, Doha, Quatar
  • Aschenbruck, J.; Meinzer, C. E.; Pohle, L.; Panning-von Scheidt, L.; Seume, J. (2013): Regeneration-Induced Forced Response in Axial TurbinesPaper No. GT2013-95431, ASME Turbo Expo 2013: Turbomachinery Technical Conference and Exposition, San Antonio, Texas, June 3-6, 2013
    DOI: 10.1115/GT2013-95431
  • Barillas, G.; Wangenheim, M.; Kinsch, P.; Jäckel, J. (2013): The T-Ring Principle: A Sophisticated Approach of Sealing DynamicallyProc. World Tribology Congress 2013, Torino, Italy, 8-13 September
  • Böttcher, J. (2013): Amplitude-Dependent Vibration Behavior of Superelastic Shape Memory Oscillators11th International Conference on Vibration Problems (ICOVP-2013)
  • Bruns, P.; Mojrzisch, S.; Twiefel, J. (2013): Stress Distribution and Durability of Pre-Stressed Piezoelectric Multilayer Actuators10th International Workshop on Piezoelectric Materials and Applications, Hannover, Germany
  • Krack, M.; Panning-von Scheidt, L.; Wallaschek, J.; Siewert, C.; Hartung, A. (2013): Reduced Order Modeling Based on Complex Nonlinear Modal Analysis and its Application to Bladed Disks With Shroud ContactPaper No. GT2013-94560, ASME Turbo Expo 2013: Turbomachinery Technical Conference and Exposition, San Antonio, Texas, June 3-6, 2013
    DOI: 10.1115/GT2013-94560
  • Krack, M.; Panning-von Scheidt, L.; Wallaschek, J.; Siewert, C.; Hartung, A. (2013): Analysis and Robust Design of Friction Joints for Vibration Reduction in Bladed DisksSIRM 2013- 10th International Conference on Vibrations in Rotating Machines, Berlin, February 25 - 27, 2013
  • Neubauer, M. (2013): An Adaptive Tuned Mass Damper Using Friction BarsASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS), Salt Lake City, USA
  • Neubauer, M.; Wallaschek, J.; Behrens, B.-A.; Krimm, R.; Hasselbusch, T. (2013): Tuned Mass Damper with Piezoelectrically Tunable Damping20th Int. Congress on Sound and Vibration (ICSV), Bangkok, Thailand
  • Roth, J.; Twiefel, J.; Wallaschek, J. (2013): Energy Harvesting Patents 2012Proceedings of 10th International Workshop on Piezoelectric Materials and Applications and 8th Energy Harvesting Workshop, Hannover, Germany
  • Saalbach, K.; Freytag, P.; Kerber, K.; Twiefel, J. (2013): Bond Quality Investigation of Ultrasonic Assisted Composite CastingProceedings of 10th International Workshop on Piezoelectric Materials and Applications and 8th Energy Harvesting Workshop, July 14-17, Hannover, Germany
    ISBN: 978-3-944586-10-6
  • Saalbach, K.; Freytag, P.; Kerber, K.; Twiefel, J. (2013): Ultrasonic Assisted Simultaneous Composite Casting – a Feasibility StudyUltrasonics Symposium (IUS), 2012 IEEE International-Proceedings
  • Tatzko, S.; Panning-von Scheidt, L.; Wallaschek, J.; Kayser, A.; Walz, G. (2013): Investigation of Alternate Mistuned Turbine Blades Non-Linear Coupled by Underplatform DampersPaper No. GT2013-95681, ASME Turbo Expo 2013: Turbomachinery Technical Conference and Exposition, San Antonio, Texas, June 3-6, 2013
    DOI: 10.1115/GT2013-95681
  • Wallaschek, J.; Saalbach, K.; Twiefel, J. (2013): Soundfield Design for Ultrasonically Assisted Composite CastingProceedings of 11th International Conference on Vibration Problems
  • Wangenheim, M.; Zimmermann, M.; Hermann, A. (2013): Model based surface topography design of pneumatic applications for improved friction propertiesProc. 22nd International Conference on Fluid Sealing, Düsseldorf
  • Wurpts, W.; Bruns, P.; Twiefel, J. (2013): A Transfer Matrix Method for the Design of Resonant Piezoelectric Devices10th International Workshop on Piezoelectric Materials and Applications, Hannover, Germany
  • Zimmermann, M.; Hermann, A.; Wangenheim, M. (2013): Friction Model for the Counter Surface Design of Pneumatic Cylinder SealsProceedings World Tribology Congress, Turin, Italy
  • Bonhage, M.; Panning-von Scheidt, L.; Wallaschek, J.; Richter, C. (2012): Transient Resonance Passage with Respect to FrictionPaper No. GT2012-68986, ASME Turbo Expo 2012: Turbomachinery Technical Conference and Exposition, Copenhagen, Denmark, June 11-15, 2012
    DOI: 10.1115/GT2012-68986
  • Böttcher, J.; Neubauer, M.; Wallaschek, J. (2012): Investigation on the Amplitude-Dependent Damping Behavior of Superelastic Shape Memory AlloysProc. of the ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS12. Stone Mountain, USA, 19-21 September
  • Brökelmann, M.; Neubauer, M.; Schwarzendahl, S. M.; Hesse, H.-J.; Wallaschek, J. (2012): Active and passive vibration control of ultrasonic bonding transducersActuator Conference, Bremen
  • Bruns, P.; Mojrzisch, S.; Twiefel, J.; Wallaschek, J. (2012): Autoresonant Control of an Electromagnetic Linear Actuator with Piecewise-Linear Restoring Force13th Mechatronics Forum International Conference, Linz, Austria
  • Czechowicz, A.; Böttcher, J.; Mojrzisch, S.; Langbein, S. (2012): High speed shape memory alloy activationASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Stone Mountain, USA
  • Krack, M.; Herzog, A.; Panning-von Scheidt, L.; Wallaschek, J.; Siewert, C.; Hartung, A. (2012): Multiharmonic Analysis and Design of Shroud Friction Joints of Bladed Disks Subject to MicroslipPaper No. DETC/CIE2012-70184, Proceedings of ASME 2012 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE, Chicago, USA, August 12-15, 2012
    DOI: 10.1115/DETC2012-70184
  • Krack, M.; Panning-von Scheidt, L.; Wallaschek, J.; Siewert, C.; Hartung, A. (2012): Robust Design of Friction Interfaces of Bladed Disks with Respect to Parameter UncertaintiesPaper No. GT2012-68578, ASME Turbo Expo 2012: Turbomachinery Technical Conference and Exposition, Copenhagen, Denmark, June 11-15, 2012
    DOI: 10.1115/GT2012-68578
  • Mojrzisch, S.; Ille, I.; Twiefel J. (2012): Driving methods and control design for high power ultrasonic transducers9th International Workshop on Piezoelectric Materials and Applications in Actuators, Hirosaki, Japan
  • Mojrzisch, S.; Ille, I.; Wallaschek, J. (2012): Online Parameter Identification for Piezoelectric Ultrasonic Transducer at High Vibration Amplitudes15th International Conference on Experimental Mechanics, Porto, Portugal
  • Murimi, E.; Neubauer, M. (2012): Piezoelectric Energy Harvesting: An OverviewProceedings Mechanical Engineering Conference on Sustainable Research and Innovation, Vol 4
    ISBN: ISSN: 2079-6226
  • Neubauer, M.; Brökelmann, M.; Schwarzendahl, S. M.; Hesse, H.-J.; Wallaschek, J. (2012): Optimization of bond transducer vibrations using active and semi-active controlActive and Passive Smart Structures and Integrated Systems 2012. Edited by Sodano, Henry A. Proceedings of the SPIE, Volume 8341, pp. 83412L-83412L-8
    DOI: 10.1117/12.914789
  • Neubauer, M.; Han, X.; Wallaschek, J. (2012): Energy Flow and Dissipation of Synchronized Switch Damping with Piezoceramics Using Negative CapacitanceInt. Conference Mechatronic Systems and Materials (MSM), Bialystok, Polen
  • Ripka, S.; Zimmermann, M. (2012): Approaches for the Validation of Analytical Models for the Simulation of Siped Tire Tread BlocksWorld Congress on Computational Mechanics, Sao Paulo, Brasil
  • Schurzig, D.; Tatzko, S.; Panning-von Scheidt, L.; Wallaschek, J. (2012): Modeling Contact Dynamics of Vanes with Adjustable Upstream Flow AnglesPaper No. GT2012-68185, ASME Turbo Expo 2012: Turbomachinery Technical Conference and Exposition, Copenhagen, Denmark, June 11-15, 2012
    DOI: 10.1115/GT2012-68185
  • Schwarzendahl, S. M.; Neubauer, M.; Wallaschek, J. (2012): Optimization of a passive piezoelectric damper for a viscously damped main systemActive and Passive Smart Structures and Integrated Systems 2012. Edited by Sodano, Henry A. Proceedings of the SPIE, Volume 8341, pp. 834107-834107-10
    DOI: 10.1117/12.915163
  • Schwarzendahl, S. M.; Szwedowicz. J.; Neubauer, M.; Panning-von Scheidt, L.; Wallaschek, J. (2012): On Blade Damping Technology Using Passive Piezo DampersPaper No. GT2012-68600, ASME Turbo Expo 2012: Turbomachinery Technical Conference and Exposition, Copenhagen, Denmark, June 11-15, 2012
    DOI: 10.1115/GT2012-68600
  • Tatzko, S.; Panning-von Scheidt, L.; Wallaschek, J.; Kayser, A. (2012): Alternate Mistuning of Turbine Bladings Coupled by Underplatform DampersPaper No. IDETC/CIE2012-70863, Proceedings of ASME 2012 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE, Chicago, USA, August 12-15, 2012
    DOI: 10.1115/DETC2012-70863
  • Wangenheim, M.; Hermann, A.; Zimmermann, M. (2012): The Effect of Counter Surface Topography on the Friction of Seals17th International Sealing Conference, Stuttgart, Germany
  • Westermann, H.; Neubauer, M.; Wallaschek, J. (2012): Modeling of a Vibration-based Piezomagnetoelastic Energy Harvesting System by Using the Duffing EquationASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS), Stone Mountain
  • Westermann, H.; Neubauer, M.; Wallaschek, J. (2012): Modeling of a nonlinear vibration-based energy harvesting system as a duffing oscillatorInt. Conference Mechatronic Systems and Materials (MSM), Bialystok, Polen
  • Zimmermann, M.; Hermann, A.; Wangenheim, M.; Grönefeld, P. (2012): Simulation-based Surface Modification for Reduction of Rubber Friction in Sealing Contacts of Pneumatic CylindersProceedings of the 26th International Conference on Surface Modification Technologies, pp. 229-237, Lyon (France)
  • Zimmermann, M.; Ripka, S.; Kühbach, N.; Wallaschek, J. (2012): Beam model for tyre tread block dynamics International Journal of Vehicle Noise and VibrationSpecial issue: Noise, Vibration and Reliability in Vehicle Systems Vol.9, Issue 3-4
    DOI: 10.1504/IJVNV.2013.055812
    ISBN: ISSN (online): 1479-148X; ISSN (print): 1479-1471
  • Han, X.; Neubauer, M.; Wallaschek, J. (2011): A Review: The control strategies of synchronized switching damping techniqueIEEE Int. Conference on Mechatronics and Automation, Peking, China, pp.1657-1663
    DOI: 10.1109/ICMA.2011.5986372
    ISBN: ISSN (online): 2152-744X, ISSN (print): 2152-7431
  • Hohl, A.; Kriegesmann, B.; Wallaschek, J.; Panning-von Scheidt, L. (2011): The Influence of Blade Properties on the Forced Response of Mistuned Bladed DisksPaper No. GT2011-46826, ASME Turbo Expo 2011: Turbomachinery Technical Conference and Exposition, Vancouver, Canada, June 6-10, 2011
    DOI: 10.1115/GT2011-46826
  • Laborenz, J.; Krack; Panning-von Scheidt, L.; Wallaschek, J.; Denk, M.: Masserey, P.-A.: (2011): Eddy Current Damper for Turbine Blading: Electromagnetic Finite Element Analysis and Measurement ResultsPaper No. GT2011-45242, ASME Turbo Expo 2011: Turbomachinery Technical Conference and Exposition, Vancouver, Canada, June 6-10, 2011
    DOI: 10.1115/GT2011-45242
  • Neubauer, M., Han, X. (2011): On the maximum damping performance of piezoelectric switching techniques, Conference on Smart MaterialsASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS), Scottsdale, USA
  • Neubauer, M., Schwarzendahl, S. M., Wallaschek, J. (2011): Determination of the piezoelectric coupling coefficient for arbitrary deformationInt. Conference Mechatronic Systems and Materials (MSM), Kaunas, Lithuania
  • Neubauer, M., Wallaschek, J. (2011): Optimized geometry of bimorphs for piezoelectric shunt damping and energy harvestingInt. Conference of Engineering Against Fracture (ICEAF), Mykonos, Greece
  • Neubauer, M.; Westermann, H.; Wallaschek, J. (2011): Modeling the dynamic behavior of a piezomagnetoelastic energy harvesting systemEuropean Nonlinear Dynamics Conference (ENOC), Rom, Italy
  • Rudat, J.; Dashevskiy, D.; Pohle, L. (2011): Model-Based Stability Analysis of Torsional Drillstring OscillationsIEEE International Conference on Control Applications (CCA) Part of 2011, IEEE Multi-Conference on Systems and Control, Denver, CO, USA, 28-30 September
  • Tatzko, S. (2011): Unilateral Impact and Contact of Elastic Structures Using Lagrangian MultipliersProceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, 11-17 November, Denver, USA (IMECE2011-63790)
  • Hohl, A.; Siewert, C.; Panning, L.; Wallaschek, J. (2009): A Substructure Based Reduced Order Model for Mistuned Bladed DisksPaper No. DETC2009-87459, Proceedings of ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2009), San Diego, USA, August 30-September 2, 2009
    DOI: 10.1115/DETC2009-87459
  • Laborenz, J.; Siewert, C.; Panning, L.; Wallaschek, J.; Gerber, C.; Masserey, P.-A. (2009): Eddy Current Damping: A Concept Study for Steam Turbine BladingPaper No. GT2009-59593, ASME Turbo Expo 2009: Turbomachinery Technical Conference and Exposition, Orlando, Florida, June 8-12, 2009
    DOI: 10.1115/GT2009-59593
  • Mihajlovic, S.; Groenefeld, P.; Wangenheim, M. (2009): Design of a new high-performance test rig for hydraulic seals20th International Conference on Fluid Sealing, S. 101-107, Bedfordshire
    ISBN: 978 1 85598 113 3
  • Siewert, C.; Panning, L.; Wallaschek, J. (2009): Nonlinear Multiharmonic Vibrations of Coupled Turbine BladingsSIRM 2009 - 8th International Conference on Vibrations in Rotating Machines, Vienna, February 23 - 25, 2009
  • Siewert, C.; Panning, L.; Wallaschek, J.; Richter, C. (2009): Multiharmonic Forced Response Analysis of a Turbine Blading Coupled by Nonlinear Contact ForcesPaper No. GT2009-59201, ASME Turbo Expo 2009: Turbomachinery Technical Conference and Exposition, Orlando, Florida, June 8-12, 2009
    DOI: 10.1115/GT2009-59201
  • Tatzko, S.; Grönefeld, P.; Wangenheim,M. (2009): Application of LCP contact formulation on mechanical systems with nonrigid coupled unilateral contact points illustrated with a simple model of a windscreen wiperProceedings of the ASME 2009 International Mechanical Engineering Congress & Exposition IMECE2009, Lake Buena Vista, Florida, USA
  • Wangenheim, M.; Ripka, S. (2009): Temperature investigations in tire/road contactProceedings of the ASME 2009 International Mechanical Engineering & Exposition, IMECE2009-11165 (Transportation Systems), Lake Buena Vista, Florida, USA, pp. 1-10
    ISBN: 978-0-7918-3863-1
  • Hohl, A.; Siewert, C.; Panning, L., Kayser, A. (2008): Nonlinear Vibration Analysis of Gas Turbine Bladings with Shroud CouplingPaper No. GT2008-50787, ASME Turbo Expo 2008: Turbomachinery Technical Conference and Exposition, Berlin, Germany, June 9-13, 2008
    DOI: 10.1115/GT2008-50787
  • Siewert, C.; Panning, L.; Gerber, C.; Masserey, P.-A. (2008): Numerical and Experimental Damping Prediction of a Nonlinearly Coupled Low Pressure Steam Turbine BladingPaper No. GT2008-51073, ASME Turbo Expo 2008: Turbomachinery Technical Conference and Exposition, Berlin, Germany, June 9-13, 2008
    DOI: 10.1115/GT2008-51073
  • Wangenheim, M.; Kröger, M. (2008): Friction Phenomena on Microscale in Technical Contacts with RubberIn: Proceedings of the 9th Biennial ASME Conference on Engineering Systems Design Analysis (ESDA), Haifa (Israel), S. 1-7
  • Denkena, B.; Deichmüller, M. ; Kröger, M.; Panning-von Scheidt, L. ; Carstensen, C. ; Kilian, S. (2007): Modeling and Simulation of the Process Machine Interaction During Tool Grinding ProcessesProceedings of the 10th CIRP International Workshop on Modeling of Machining Operations, Reggio Calabria, Italy, August 27-28, 2007
  • Siewert, C.; Panning, L.; Schmidt-Fellner, A.; Kayser, A. (2006): The Estimation of the Contact Stiffness for Directly and Indirectly Coupled Turbine BladingPaper No. GT2006-90473, ASME Turbo Expo 2006: Turbomachinery Technical Conference and Exposition, Barcelona, Spain, May 8-11, 2006
    DOI: 10.1115/GT2006-90473
  • Götting, F.; Sextro, W.; Panning, L.; Popp, K. (2004): Systematic Mistuning of Bladed Disk Assemblies With Friction ContactsPaper No. GT2004-53310, ASME Turbo Expo 2004: Turbomachinery Technical Conference and Exposition, Vienna, Austria, June 14-17, 2004
    DOI: 10.1115/GT2004-53310
  • Panning, L.; Sextro, W.; Popp, K.; Götting, F.; Kayser, A.; Wolter, I. (2004): Asymmetrical Underplatform Dampers in Gas Turbine Bladings: Theory and ApplicationPaper No. GT2004-53316, ASME Turbo Expo 2004: Turbomachinery Technical Conference and Exposition, Vienna, Austria, June 14-17, 2004
    DOI: 10.1115/GT2004-53316
  • Götting, F.; Sextro, W.; Panning, L.; Popp, K. (2003): Schwingungsverhalten von verstimmten Beschaufelungen mit ReibelementenSIRM 2003 - Schwingungen in rotierenden Maschinen 6, Darmstadt, February 26-28, 2003
  • Panning, L.; Sextro, W.; Popp, K. (2002): Optimization of the Contact Geometry between Turbine Blades and Underplatform Dampers with Respect to Friction DampingPaper No. GT-2002-30429, ASME Turbo Expo 2002: Turbomachinery Technical Conference and Exposition, Amsterdam, The Netherlands, June 3-6, 2002
    DOI: 10.1115/GT2002-30429
  • Sextro, W.; Panning, L.; Götting, F.; Popp, K. (2002): Fast Calculation of the Statistics of the Forced Response of Mistuned Bladed Disk Assemblies with Friction ContactsPaper No. GT-2002-30427, ASME Turbo Expo 2002: Turbomachinery Technical Conference and Exposition, Amsterdam, The Netherlands, June 3-6, 2002
    DOI: 10.1115/GT2002-30427
  • Panning, L.; Sextro, W.; Popp, K. (2000): Optimization of Interblade Friction Damper DesignPaper No. 2000-GT-0541, ASME Turbo Expo 2000: Turbomachinery Technical Conference and Exposition, Munich, Germany, May 8-11, 2000
    DOI: 10.1115/2000-GT-0541

Bücher

  • Kahms, Stephanie (2021): Thermo-mechanische Modellierung von Flugzeugreifen für transiente ManöverTEWISS Verlag
    ISBN: 978-3-95900-526-5
  • Wangenheim, M. (2012): Untersuchungen zu Reibmechanismen an PneumatikdichtungenPZH-Verlag, Garbsen
    ISBN: 978-3-943104-63-9
  • Popp, K.; Schiehlen, W. (unter Mitwirkung von Kröger, M.; Panning, L.) (2010): Ground Vehicle DynamicsSpringer-Verlag Berlin
    DOI: 10.1007/978-3-540-68553-1
    ISBN: 978-3-540-24038-9
  • Panning, L. (2005): Auslegung von Reibelementen zur Schwingungsdämpfung von TurbinenschaufelnDiss., Düsseldorf: VDI-Fortschrittberichte Reihe 11, Nr. 328

Beiträge in Büchern

  • Kleyman, G.; Jahn, M.; Tatzko, S.; Panning-von Scheidt, L. (2023): A Combined Numerical-Experimental Approach for the Damping Evaluation of Non-Linear Dissipative Vibration SystemsEberhard, P. (ed.).: Lecture Notes in Applied and Computational Mechanics, Volume 102: Calm, Smooth and Smart. Novel Approaches for Influencing Vibrations by Means of Deliberately Introduced Dissipation, pp. 285-303
    DOI: 10.1007/978-3-031-36143-2
  • Neubauer, M.; Twiefel, J.; Westermann, H.; Wallaschek, J. (2012): Modeling Aspects of Nonlinear Energy Harvesting for Increased BandwidthSmall-Scale Energy Harvesting, Edited by M. Lallert, InTech, Chapter 13
    DOI: 10.5772/52232
    ISBN: 978-953-51-0826-9
  • Wallaschek, J.; Neubauer, M.; Twiefel, J. (2011): Electromechanical models for energy harvesting systemsEnergy Harvesting with Piezoelectric and Pyroelectric Materials, pp. 39-56, chapter 2
    ISBN: 978-0-87849-159-9
  • Richter, B.; Twiefel, J.; Wallaschek, J. (2009): Piezoelectric Equivalent Circuit ModelsIn: Priya, S.; Inman, D. J. (Hrsg.): Energy Harvesting Technologies, pp. 107-128
    DOI: 10.1007/978-0-387-76464-1_4
    ISBN: 978-0-387-76463-4
  • Niggemann, E.; Michels, J. S.; Richter, B. (2007): Anforderungen an energie-autarke Systeme, mögliche Anwendungsfelder und aktuelle UntersuchungenWallaschek, Jörg (Hrsg.) Energy Harvesting. Grundlagen und Praxis energieautarker Systeme, S. 103-115, Expert Verlag
    ISBN: 978-3-8169-2789-1

Vortrag

  • Berthold, R.; Kahms, S. (2022): Weiche Robotersysteme: Chancen und HerausforderungenVDI Mechatroniktagung 2022
  • Berthold, R.; Kahms, S. (2022): Dynamic modeling of a soft pneumatic acutator8th European Congress on Computational Methods in Applied Sciences and Engineering ECCOMAS Congress 2022
  • Berthold, R.; Kahms, S. (2020): DEVELOPMENT OF A FINITE ELEMENT MODEL FOR SIMULATION OF A SOFT ROBOT ACTUATOR WITH EXTERNAL LOADS4th World Congress on Computational Mechanics (WCCM)
  • Hoffmann, T. (2018): Convenient Choice of Friction Test Parameters for Simulation of Turbine Blade ContactsBlade Mechanics Seminar, Winterthur, CH
  • Ohrdes, H.; Twiefel, J. ; Wallaschek, J.; Nogueira, R.; Rosenwinkel, K. H. (2016): A feasibility study on the use of ultrasound for inactivating E. Coli in raw and treated wastewater2nd International Conference on Ultrasonic-based Applications: from analysis to synthesis - Ultrasonics 2016

Konferenz

  • Amer, M.; Schmied, S.; Paehr, M.; Panning-von Scheidt, L.; Seume, J.R. (2022): Optimal Sensor Placement and Model Updating of Axial Compressor Casing ComponentsProceedings of IMAC-XL (40th) 2022: A Conference and Exposition on Structural Dynamics, Feb. 7-10, Orlando, Florida
  • Fischer, H.; Tatzko, S. (2020): Traveling wave effects in structures with local viscous and friction dampingInternational Conference on Noise and Vibration Engineering (ISMA), Leuven, Belgium, September 7-9, 2020
  • Förster, A.; Panning-von Scheidt, L.; Wallaschek, J. (2020): Forced Response of Nonlinear Systems Under Combined Harmonic and Random ExcitationKerschen, Brake et al. (Hg.) 2020 – Nonlinear Structures and Systems
    DOI: 10.1007/978-3-030-12391-8_7
  • Hoffmann T., Jahn M., Scheidt L.P., Wallaschek J. (2020): Modal Excitation of Circular Rotating Structures Using an Innovative Electromagnetic DeviceMains M., Dilworth B. (eds) Topics in Modal Analysis & Testing, Volume 8. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, Cham
    DOI: 10.1007/978-3-030-12684-1_15
    ISBN: 978-3-030-12684-1
  • Kleyman, G.; Jahn, M.; Tatzko, S. (2020): Hybrid nonlinear phase resonance testing utilizing realtime substructuring and control based continuationInternational Conference on Noise and Vibration Engineering (ISMA), Leuven, Belgium, September 7-9, 2020
  • Marhenke, N.; Wallaschek, J.; Panning-von Scheidt, L.; Tatzko, S.; Hartung, A.; Schwarz, S. (2020): Numerical investigations of the energy transfer between modes due to multi-resonances of a nonlinear friction-damped modelInternational Conference on Noise and Vibration Engineering (ISMA), Leuven, Belgium, September 7-9, 2020
  • Förster, A.; Panning-von Scheidt, L.; Wallaschek, J. (2019): Forced Response of Nonlinear Systems Under Combined Harmonic and Random ExcitationKerschen, Brake et al. (Hg.) 2020 – Nonlinear Structures and Systems
    DOI: 10.1007/978-3-030-12391-8_7
  • Oettinger, M.; Prohaska, P.; Schwerdt, L.; Panning-von Scheidt, L.; Herbst, F.; Seume, J. (2019): Potenzialstudie eines Verbunds aus entkoppelt betriebenen AeroderivatenBeitrag in: Hurtado, A.; Beckmann, M.; (Hrsg.): Kraftwerkstechnik 2019, SAXONIA
    ISBN: 3934409938
  • Schwerdt, L.; Panning-von Scheidt, L.; Wallaschek, J. (2019): A Priori Interface Reduction for Substructuring of Multistage Bladed DisksDynamic Substructures, Volume 4, Proceedings of the 37th IMAC, a Conference and Exposition on Structural Dynamics 2019, Springer, 13–21
    ISBN: 3030121844
  • Linke, T.; Wiese, K.; Wangenheim, M.; Wies, B.; Wallaschek, J. (2017): Ein neuer Laborprüfstand zur Bewertung von einzelnen Reifenprofil- klötzen16. Internationale VDI-Tagung Reifen-Fahrwerk-Fahrbahn 2017, S. 257–270
  • Nothdurft, S.; Springer, A.; Kaierle, S.; Mildebrath, M.; Hassel, T.; Ohrdes, H.; Wallaschek, J. (2017): Beeinflussung des Schmelzbades von Mischverbindungen im Laserstrahl-schweißprozess durch UltraschallFortschrittsberichte der Materialforschung und Werkstofftechnik / Bulletin of Materials Research and Engineering, Band 4, Tagungsband 2. Niedersächsisches Symposium Materialtechnik 23. bis 24. Februar 2017. Shaker, Aachen S. 259-268
  • Flöter, F.; Pohle, L.; Denkena, B.; Panning-von Scheidt, L.; Wallaschek, J. (2015): Mistuning of Blisks During Milling Process - Manufacturing and RepairDeutsche Gesellschaft für Luft- und Raumfahrt (Hg.): 64. Deutscher Luft- und Raumfahrtkongress (DLRK), Rostock, Germany, September 22-24, 2015
  • Tatzko, S.; Panning-von Scheidt, L.; Wallaschek, J. (2015): Forced response of turbine bladings with alternating mistuning and friction damper couplingEUROMECH Colloquium 573 Coupling and Nonlinear interactions in Rotating Machinery, Lyon, France, August 25-26, 2015
  • Willeke, S. (2015): Mistuned Bladed Disks with Aeroelastic Coupling20th Blade Mechanics Seminar, Winterthur, Switzerland, September 8, 2015
  • Hentschel, O.; Panning-von Scheidt, L.; Wallaschek, J.; Denk, M.; Masserey P.-A. (2014): Introduction and Evaluation of an Experimental Setup for Material Damping DeterminationProc. Of ISROMAC-15, The 15th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, February 24 - 28, 2014
  • Krack, M.; Panning-von Scheidt, L.; Wallaschek, J. (2014): A Framework for the Computational Dynamic Analysis of Coupled Structures Using Nonlinear ModesIn: Kerschen G. (eds) Nonlinear Dynamics, Volume 2: Proceedings of the 32nd IMAC, A Conference and Exposition on Structural Dynamics, Orlando, Florida, USA, February 3-5, 2014
    DOI: 10.1007/978-3-319-04522-1_5
  • Krack, M.; Panning-von Scheidt, L.; Wallaschek, J. (2014): Modal analysis of nonlinear dissipative systems: Application to vibration damping with shape memory materialsProceedings of the 15th Conference on Nonlinear Vibrations, Localization and Energy Transfer, Istanbul, Turkey, July 2-4, 2014
  • Krack, M.; Panning-von Scheidt, L.; Wallaschek, J. (2014): Vibration analysis of structures with contact interfaces using nonlinear modesProceedings of the 11th World Congress on Computational Mechanics, July 20-25, Barcelona, Spain, 2014
  • Bonhage, M.; Herzog, A.; Panning-von Scheidt, L.; Wallaschek, J. (2013): Resonance Passage of Structures with Friction ContactsPaper ID 345-993, 4th Canadian Conference on Nonlinear Solid Mechanics (CanCNSM), Montreal, Canada, July 23-26, 2013
  • Bonhage, M.; Panning-von Scheidt, L.; Wallaschek, J. (2013): Resonance Passage of Cyclic Symmetric StructuresInternational Conference on Vibration Problems (ICOVP-2013), Lissabon, Portugal, September 9-12, 2013
  • Krack, M.; Panning-von Scheidt, L.; Wallaschek, J. (2013): A Method of Modal Analysis and Synthesis for Mechanical Systems with Piecewise-Smooth NonlinearitiesPaper 682, 4th Canadian Conference on Nonlinear Solid Mechanics (CanCNSM), Montreal, Canada, July 23-26, 2013
  • Tamai, R.; Tanaka, R.; Sato, Y.; Kusterer, K.; Lin, G.; Kemper, M.; Panning-von Scheidt, L. (2013): Vibration Analysis of Shrouded Turbine Blades for a 30 MW Gas TurbinePaper No. TBTS2013-2014, ASME 2013 Turbine Blade Tip Technical Symposium and Course Week (TBTS2013), Hamburg, Germany, September 30–October 3, 2013
    DOI: 10.1115/TBTS2013-2014
  • Bartelt, M.; Freund, O.; Seume, J. R.; Panning-von Scheidt, L.; Röhle, I.; Buske, C. (2012): Aeroakustik & Aeroelastik der Strömungsmaschinen - Eine Vorlesung als Reaktion auf aktuelle Herausforderungen in der TurbomaschinenentwicklungDAGA 2012, 38. Jahrestagung für Akustik, Darmstadt, March 19-22, 2012
  • Laborenz, J.; Panning, L.; Wallaschek, J.; Denk, M.; Masserey, P.-A. (2012): Experimental Analysis of an Eddy Current Damping Devce Applied to a Rotating Integrally Bladed DiskProc. Of ISROMAC-14 The 14th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, February 27 - March 2, 2012
  • Pohle, L.; Panning-von Scheidt, L.; Wallaschek, J. (2012): Reduced Order Model of Mistuned Bladed Disks Using the Krylov-Subspace Combined with the Craig-Bampton Reduction TechniquePaper No. 18187, Proceedings of the 10th World Congress on Computational Mechanics, Sao Paulo, Brazil, July 8-13, 2012
    DOI: 10.5151/meceng-wccm2012-18187
  • Schurzig, D.; Panning-von Scheidt, L.; Hartung, A.; Wallaschek, J. (2012): Nonlinear harmonic analysis of structures containing joints with impacts and frictionPaper No. 18336, Proceedings of the 10th World Congress on Computational Mechanics, Sao Paulo, Brazil, July 8-13, 2012
    DOI: 10.5151/meceng-wccm2012-18336
  • Wangenheim, M.; Hermann, A.; Zimmermann, M. (2012): The Effect of Counter Surface Topography on the Friction of SealsProceedings of the 17th International Sealing Conference, pp. 663-673, Stuttgart
  • Dobberstein, J.-H.; Wangenheim, M.; Schmerwitz, F.; Lind, H.; Wriggers, P.; Wies, B. (2011): Simulation of the friction of rubber compounds on real road surfacesProceedings 2nd International Conference on Computational Contact Mechanics, Hannover
  • Hohl, A.; Panning, L. (2011): Analysis of the Frequency Response of Mistuned Multi-Stage Bladed DisksPaper No. 11-4, ICEAF II, 2nd International Conference of Engineering against Fracture, Mykonos, Greece, June 22-24, 2011
  • Hermann, A.; Grönefeld, P., Wangenheim, M. (2010): Variation of counter surface parameters and their tribological input on pneumatic actuatorsISC, Internationale Dichtungstagung, 16. Frankfurt am Main : VDMA Fluidtechnik, S. 209-220
  • Hermann, A.; Wangenheim, M.; Grönefeld, P. (2010): Tribological Impact of Surface Modifications to Frictional Counterparts in Contact with TPU CompoundsProceedings of the 7th International Fluid Power Conference Aachen, S. 287-300
  • Hohl, A.; Neubauer, M.; Wallaschek, J. (2010): Damping of cyclic bladed disks utilizing a piezoelectric switching technique 10th Int. Conference on Motion and Vibration Control (MOVIC), Tokyo, Japan
  • Hohl, A.; Panning, L.; Wallaschek, J. (2010): Analysis of the Influence of Blade Pattern Characteristics on the Forced Response of Mistuned Blisks with a Cyclic CMS-Based Substructure ModelPaper No. ESDA2010-25294, Proceedings of the ASME 2010 10th Biennial Conference on Engineering Systems and Design Analysis (ESDA 2010), Istanbul, Turkey, July 12-14, 2010
    DOI: 10.1115/ESDA2010-25294
  • Hussong, A.; Schiedeck, F.; Mojrzisch, S.; Ortmaier, T.; Wallaschek, J. (2010): Development of a shape memory alloy based grasping mechanism for an automated insertion tool for cochlear implants Proc. 12th Int. Conf. on New Actuators, pages 889–891
  • Krack, M.; Secanell, M.; Mertiny, P. (2010): Advanced Optimization Strategies for Cost-Sensitive Design of Energy Storage Flywheel Rotors In: Proceedings of the Society for the Advancement of Materials and Process Engineering, Seattle
  • Neubauer, M.; Renner, A. (2010): Model-Based Piezoelectric Self-Sensing Technique 10th Biennial Conference on Engineering Systems Design and Analysis (ESDA), Istanbul, Turkey
  • Neubauer, M.; Schwarzendahl, S.; Brökelmann, M.; Hesse, H.-J.; Wallaschek, J. (2010): Active and semi-active vibration control of ultrasonic bonding transducers IMAPS and SEMI Workshop on Wire Bonding, San Francisco, USA
  • Neubauer, M.; Wallaschek, J. (2010): Efficient Modeling of the Damping Performance of Piezoelectric Switching Techniques using Harmonic Balance Method 10th Int. Conference on Motion and Vibration Control (MOVIC), Tokyo, Japan
  • Neubauer, M.; Wallaschek, J. (2010): Vibration Damping with Shunted Piezoceramics: Fundamendals and Technical Applications6th Int. Conference Mechatronic Systems and Materials (MSM), Opole, Poland
  • Schwarzendahl, S.; Han, X.; Neubauer, M.; Wallaschek, J. (2010): Optimizing switching algorithm of synchronized switch damping for multimodal excitation SPIE Conference Smart structures and materials, San Diego
  • Uribe, D.O.; Hao Zhu; Wallaschek, J. (2010): Automated measurement system for mechanical characterization of soft tissues and phantomsElectronic Devices, Systems and Applications (ICEDSA), 2010 International Conference, pp. 227-231, 11-14 April
    DOI: 10.1109/ICEDSA.2010.5503068
  • Grönefeld, P.; Tatzko, S.; Wangenheim, M. (2009): Sprag-Slip Simulation with a Modular Wiper ModelProceedings of the 7th EUROMECH Solid Mechanics Conference, S. 293-294, Lisbon, Portugal
  • Hohl, A.; Neubauer, M.; Panning, L.; Wallaschek, J. (2009): Modelling of Shunted Piezoceramic Actuators with Substructure Techniques and Application to a Bladed Disk ModelIEEE/ASME International Conference on Advanced Intelligent Mechatronics, Singapore, July 14-17, 2009
  • Hohl, A.; Neubauer, M.; Schwarzendahl, S. M.; Panning, L.; Wallaschek, J. (2009): Active and Semiactive Vibration Damping of Turbine Blades with PiezoceramicsProc. SPIE Smart Structures/NDE 2009, San Diego, March 8-12, 2009
  • Ripka, S.; Mihajlovic, S.; Wangenheim, M; Wallaschek, J.; Wiese, K.; Wies, B. (2009): Tread block mechanics on ice and snow surfaces studied with a new high speed linear friction test rig12. Int. Congress Reifen-Fahrwerk Fahrbahn, VDI-Berichte Nr. 2086, S. 239-254, Hannover
    ISBN: 978-3-18-092086-3
  • Ripka, S.; Wangenheim, M. (2009): Simulation of a siped tire tread block by Euler-Bernoulli beamsPAMM-Proc., Vol. 9, Applied Analysis, S.531-532
  • Henke, M.; Guendogdu, Y.; Seume, J.; Siewert, C.; Panning, L.; Wallaschek, J. (2008): Unidirectional Coupled Aerodynamic and Structural Mechanic Analysis of a Turbine BladingProc. of IMechE 9th Int. Conf. on Vibrations in Rotating Machinery, Exeter, S. 171-184
  • Siewert, C.; Krack, M.; Panning, L.; Wallaschek, J. (2008): The Nonlinear Analysis of the Multiharmonic Forced Response of Coupled Turbine BladingProc. Of ISROMAC-12, The 12th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, February 27th - March 2, 2012
  • Wangenheim, M.; Kozma, M.; Mate, L. (2008): Friction behaviour of grease lubricated sealsISC: International Sealing Conference, 15. Frankfurt am Main: VDMA Fluidtechnik, pp. 281-291
  • Wangenheim, M.; Kröger, M. (2008): Avoidance of friction induced vibrations on sealsPAMM - Proceedings in Applied Mathematics and Mechanics, Bremen, Germany
  • B. Verheyde; A. Vanhulsel; M. Rombouts; J. Meneve; E. Roman; L. Martinez; Y. Huttel; M. Wangenheim (2007): Surface treatment of elastomers to improve the tribological properties against metal counterbodiesProceeding ECOTRIB 2007, (Ljulbljana, Slovenia)
    ISBN: 978-961-902-548-2
  • Genzo, A.; Sextro, W.; Panning, L. (2007): Schwingungsverhalten elastischer Körper mit nichtlinearen Kopplungen in ausgedehnten ReibkontaktenVDI-Tagung Nichtlineare Schwingungen - Reibung und Kontaktmechanik (VDI-Berichte 2022), Kassel, Germany, November 13-14, 2007
  • Grönefeld, P.; Kröger, M. (2007): Experimentelle Untersuchungen von Stick-Slip Schwingungen an ScheibenwischernGAMM, Zürich
  • Müller, T.; Wallaschek, J. (2007): Musterdatenbank zur Konzipierung verlässlicher mechatronischer SystemeIn: TTZ2007 - 23. Tagung Technische Zuverlässigkeit. Entwicklung und Betrieb zuverlässiger Produkte, Düsseldorf: VDI-Verlag, S. 135-146
  • Panning, L.; Kröger, M.; Wallaschek, J. (2007): Schwingungsdämpfung durch Reibung: Theorie, Experiment, AnwendungenVDI-Tagung Schwingungsdämpfung (VDI-Berichte 2003), Wiesloch, October 16-17, 2007
  • Romberg, O.; Tausche, M.; Pereira, C.; Panning, L. (2007): Passive Damping of Spacecraft Sandwich Panels10th European Conference on Spacecraft Structures, Materials & Mechanical Testing, Berlin, September 10-13, 2007
  • Wangenheim, M.; Kröger, M.; Wallaschek, J. (2007): Vermeidung von reibungsselbsterregten Schwingungen an Systemen mit Dichtungen durch OberflächenbeschichtungenTagungsband VDI-Tagung: Nichtlineare Schwingungen, VDI-Berichte 2022, Kassel
    ISBN: 978-3-18-092022-1
  • B. Richter; J. Twiefel; T. Hemsel; J. Wallaschek (2006): Model Based Design of Piezoelectric Generators Utilising Geometrical and Material Properties
  • Genzo, A.; Sextro, W.; Panning, L.: (2006): Dynamic Behaviour of Elastic Bodies Coupled by Extended Friction ContactsProc. of the 12th International Conference on Noise and Vibration Engineering (ISMA), Leuven, Belgiuem, September 18-20, 2006
  • Gutzeit, F.; Wangenheim, M.; Kröger, M. (2006): An Experimentally Validated Model for Unsteady Rolling Proceedings European Conference on Computational Mechanics ; 3 (Lisbon, Portugal)
    ISBN: 1-402-04994-3
  • Schedlinski, C.; Genzo, A.; Läer, B.; Panning, L. (2006): Modeling of Assembled Combustion Engine Parts under Consideration of Micro Slip Effects in the Connection FlangesProc. of the 12th International Conference on Noise and Vibration Engineering (ISMA), Leuven, Belgium, September 18-20, 2006
  • Kröger, M.; Wangenheim, M.; Moldenhauer, P. (2005): Temperatureffekte auf das lokale Reibverhalten von Elastomeren im Gleit- und RollkontaktTagungsband VDI-Tagung Reifen-Fahrwerk-Fahrbahn. VDI-Berichte Düsseldorf, 1912
    ISBN: 3-18-091912-4
  • Sextro, W.; Moldenhauer, P.; Wangenheim, M.; Lindner, M.; Kröger, M. (2005): Contact Behaviour of a Sliding Rubber ElementLecture notes in applied and computational mechanics. - Berlin [u.a.] : Springer; 27
    ISBN: 3-540-31760-0
  • Panning, L.; Sextro, W.; Popp, K. (2002): Spatial Dynamics of Tuned and Mistuned Bladed Disk Assemblies with Cylindrical and Wedge Shaped Friction DampersPaper No. DD-028, Proc. of ISROMAC-9, The 9th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, USA, February 10-14, 2002
  • Panning, L.; Sextro, W.; Popp, K. (2001): Schwingungsanalyse verstimmter Schaufelkränzemit Reibelementen, WienTagungsband Schwingungen in rotierenden Maschinen V. Wien, February 26-28, 2001
  • A. Bode, A.; Panning, L.; Schröder, J.J. (1998): Growth and Collapse of Vapor Bubbles in Subcooled Boiling near the Region of Alternating Boiling Modes, Kyongju, Korea11th Int. Heat Transfer Conf. 2, Kyongju, Korea, August 23-28, 1998

Berichte

  • Hoffmann, T.; Panning-von Scheidt, L. (2019): Frequenz- und Dämpfungsvorhersage für freistehende Turbinenschaufeln mit Unterplattform-DämpferLeibniz Universität Hannover, Förderkennzeichen BMWi 03ET7041L
    DOI: 10.2314/KXP:1689220627
  • Willeke, S.; Meinzer, C.; Keller, C.; Panning-von Scheidt, L.; Schönenborn, H. (2017): Mistuning aerodynamisch und strukturmechanisch gekoppelter BeschaufelungenAbschlussbericht, FVV-Frühjahrstagung 2017, Bad Neuenahr, FVV-Heft R 579
  • Willeke, S.; Meinzer, C.; Panning-von Scheidt, L.; Schönenborn, H. (2015): Mistuning aerodynamisch und strukturmechanisch gekoppelter BeschaufelungenZwischenbericht, FVV-Herbsttagung 2015, Würzburg, FVV-Heft R 573
  • Gausemeier, J.; Rammig, F. J.; Schäfer, W.; Trächtler, A.; Wallaschek, J. (Hrsg.) (2007): 5. Paderborner Workshop Entwurf mechatronischer SystemePaderborn: Universität Paderborn, Heinz Nixdorf Institut, Verlagsschriftenreihe, Bd. 210
    ISBN: 978-3-939350-29-3
  • J. Wallaschek; R. Kauschke (2007): Systematik zur lichtechnischen Gestaltung von aktiven ScheinwerfenUniversität Paderborn, Heinz Nixdorf Institut

Zeitschrift

  • Jahn, M.; Panning-von Scheidt, L.; Wallaschek, J. (2019): Parameter on Nonlinear Energy Sink attached to Multiple Degree of Freedom SystemPAMM Proceedings in Applied Mathematics and Mechanics, Vol. 19, No. 1, 2019
    DOI: 10.1002/pamm.201900272
  • Wangenheim, M.; Lind, H.; Linke, T.; Lecking, D. (2016): Portable Friction TesterTire Technology International - Annual Review, pp. 64-66
  • Bonhage, M.; Hentschel; O. P.; Panning-v. Scheidt, L.; Wallaschek, J. (2015): Transient amplification of maximum vibration amplitudesProc. Appl. Math. Mech., 15: 47-48
    DOI: 10.1002/pamm.201510014
  • Hentschel, O. P.; Bonhage, M.; Panning‐von Scheidt, L.; Wallaschek, J. (2015): Evaluation of a Finite Element Approach for Damping DeterminationProc. Appl. Math. Mech., 15: 201–202
    DOI: 10.1002/pamm.201510091
  • Kaptan, K.; Panning‐von Scheidt, L.; Wallaschek, J. (2015): The Vibrational Behavior of Coupled Bladed Disks with Variable Rotational SpeedProc. Appl. Math. Mech., 15: 255–256
    DOI: 10.1002/pamm.201510118
  • Pohle, L.; Panning‐von Scheidt, P.; Wallaschek. J. (2015): Harmonic Mistuning of Blisks Proc. Appl. Math. Mech., 15: 641-642
    DOI: 10.1002/pamm.201510310
  • Marin, A.; Heitzmann, P.; Twiefel, J.; Priya, S. (2012): Improved pen harvester for powering a pulse rate sensorProc. of SPIE Vol. 8341, 83411D-1
  • Kattenstroth, R.; Harms, H.-H.; Wurpts, W.; Twiefel, J.; Wallaschek, J. (2011): Reibkraftreduktion mittels Ultraschallanregung in der BodenbearbeitungLandtechnik Band 66 Heft 1, pp. 10-13
    DOI: 10.15150/lt.2011.341
  • Herzog, A.; Panning-von Scheidt, L. (2010): Nonlinear Vibrations with Friction: A Multiharmonic ApproachProc. Appl. Math. Mech., 10: 245–246
    DOI: 10.1002/pamm.201010115
  • Laborenz, J.; Siewert, C.; Panning, L.; Wallaschek, J.; Gerber, C. (2009): Mechanical model of a mistuned 2DOF-structure coupled by viscous dampingProc. Appl. Math. Mech., 9: 237–238
    DOI: 10.1002/pamm.200910092
  • Neubauer, M.; Wallaschek, J. (2009): Precise Calculation of Piezoelectric Switching Techniques for Vibration DampingSPIE conference Smart structures and materials, San Diego
  • Neubauer, M.; Wallaschek, J. (2009): Vibration Damping with Piezoceramics Shunted to Negative Capacitance NetworksProceedings IEEE/ASME Int. Conf. on Advanced Intelligent Mechatronics (AIM), Singapure
  • Oliva Uribe, D.; Stroop, R.; Wallaschek, J. (2009): Piezoelectric self-sensing system for tactile intraoperative brain tumor delineation in neurosurgeryEngineering in Medicine and Biology Society, EMBC 2009, Annual International Conference of the IEEE, pp.737-740, USA
  • Zhao, S.; Mojrzisch, S.; Wallaschek, J. (2009): Development of An Active Squeeze Film Journal Bearing Using High Power Ultrasonic Transducers, ProcASME 2009 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Oxnard, California, USA
  • Zhao, S.; Twiefel, J.; Wallaschek, J. (2009): Design and experimental investigations of high power piezoelectric transducers for a novel squeeze film journal bearingProc. SPIE, Vol. 7288, Active and Passive Smart Structures and Integrated Systems, San Diego, CA, USA
  • Zhao, S.; Wallaschek J. (2009): A standing wave acoustic levitation system for large planar objectsArchive of Applied Mechanics, Springer
    DOI: 10.1007/s00419-009-0401-3
  • Zhao, S.; Wallaschek, J. (2009): Experimental Investigations of Ultrasonic Levitation in A Machine Tool Spindle SystemProc. 2009 IEEE International Ultrasonics Symposium, Roma, Italy
  • Zhao, S.; Wallaschek, J. (2009): Design and modeling of a novel squeeze film journal bearingIEEE International Conference on Mechatronics and Automation, Changchun, Jilin, China
  • Heisel, U.; Wallaschek, J.; Eisseler, R.; Potthast, C. (2008): Ultrasonic deep hole drilling in Electrolytic Copper ECu 57CIRP Annals – Manufacturing Technology, 2008, 57 (1), S. 53-56
    DOI: 10.1016/j.cirp.2008.03.078
  • Littman, W.; Schiedeck, F. (2008): Neue mechatronische Analogien in der Magnetik zur Modellierung elektromagnetomechanischer SystemeForschung im Ingenieurwesen, 2008, 72, 121-133
    DOI: 10.1007/s10010-008-0074-z
  • Mracek, M.; Hemsel, T.; Sattel, T.; Vasiljev, P.; Wallaschek, J. (2008): Driving Concepts for bundled Ultrasonic Linear MotorsJournal of Electroceramics, 2008, 20 (3-4), S. 153-158
    DOI: 10.1007/s10832-007-9123-5
  • Neubauer, M.; Wallaschek, J. (2008): Analytical and Experimental Investigation of the Frequency Ratio and switching Law for Piezoelectric switching TechniquesSmart Materials and Structures, 2008, 17 (3), Art. No. 035003
    DOI: 10.1088/0964-1726/17/3/035003
  • Potthast, C.; Eisseler, R.; Klotz, D.; Wallaschek, J.; Heisel, U. (2008): Piezoelectric Actuator Design for ultrasonically assisted deep hole drillingJournal of Electroceramics, 2008, 20 (3-4), S. 187-192.
    DOI: 10.1007/s10832-007-9132-4
  • Stroop, R.; Uribe, D. O.; Martinez, M. O.; Brökelmann, M.; Hemsel, T.; Wallaschek, J. (2008): Tactile Tissue Characterisation by Piezoelectric SystemsJournal of Electroceramics, 2008, 20 (3-4), S. 237-241
    DOI: 10.1007/s10832-007-9183-6
  • Twiefel, J.; Klubal, M.; Paiz, C.; Mojrzisch, S.; Kruger, H. (2008): Digital signal processing for an adaptive phase-locked loop controllerProc. SPIE 6926, 69260A
    DOI: 10.1117/12.776091
  • Twiefel, J.; Potthast, C.; Mracek, M.; Hemsel, T.; Sattel, T.; Wallaschek, J. (2008): Fundamental Experiments as Benchmark Problems for modeling Ultrasonic Micro-Impact ProcessesJournal of Electroceramics, 2008, 20 (3-4), S. 209-214
    DOI: 10.1007/s10832-007-9169-4
  • Twiefel, J.; Richter, B.; Sattel, T.; Wallaschek, J. (2008): Power Output Estimation and Experimental Validation for Piezoelectric Energy Harvesting SystemsJournal of Electroceramics, 2008, 20 (3-4), S. 203-208
    DOI: 10.1007/s10832-007-9168-5
  • Uribe, D. O.; Stroop, R.; Hemsel, T.; Wallaschek, J. (2008): Development of a Biomedical Tissue Differentiation System using piezoelectric actuatorsIEEE International Frequency Control Symposium, FCS, 2008, Art. No. 4622963, S. 91-94
  • Hemsel, T.; Stroop, R.; Oliva Uribe, D.; Wallaschek, J. (2007): Resonant vibrating Sensors for Tactile Tissue DifferentiationJournal of Sound and Vibration, 1st International Conference on Vibro-Impact Systems, 20-22 July 2006, Loughborough, UK, Elsevier, S. 441-446
    DOI: 10.1016/j.jsv.2007.03.063
    ISBN: ISSN 0022-460X
  • Hohl, A.; Panning, L.; Siewert, C.; Bürge, A. (2007): The Vibrational Behaviour of Bladed Disks with Multiple Coupling DevicesProc. Appl. Math. Mech., 7: 4040037–4040038
    DOI: 10.1002/pamm.200700724
  • M. Mracek; T. Hemsel; T. Sattel; P. Vasiljev; J. Wallaschek (2007): Driving concepts for bundled ultrasonic linear motorsJournal of Electroceramics
  • Mracek, M.; Hemsel, T.; Sattel, T.; Vasiljev, P.; Wallaschek, J. (2007): Driving Concepts for bundled Ultrasonic Linear MotorsJournal of Electroceramics
    DOI: 10.1007/s10832-007-9123-5
    ISBN: ISSN 1385-3449
  • Müller, T.; Manga, H. K.; Walther, M.; Wallaschek, J. (2007): Results of an Industry Survey on the Application of Dependability Oriented Design MethodsIn: The Future of Product Development. Proceedings of the 17th CIRP Design Conference, Berlin, Springer-Verlag, 2007, S. 175-184
  • Panning, L.; Kröger, M. (2007): Modellierung der Schwingungen beim WerkzeugschleifenProc. Appl. Math. Mech., 7: 4050029–4050030
    DOI: 10.1002/pamm.200700845
  • Potthast, C.; Eisseler, R.; Klotz, D.; Wallaschek, J.; Heisel, U. (2007): Piezoelectric Actuator Design for ultrasonically assisted deep hole drillingJournal of Electroceramics
    DOI: 10.1007/s10832-007-9132-4
    ISBN: ISSN 1385-3449
  • Potthast, C.; Twiefel, J.; Wallaschek, J. (2007): Modeling Approaches for an Ultrasonic Percussion DrillJournal of Sound and Vibration, S. 405-417
  • Potthast, C.; Twiefel, J.; Wallaschek, J. (2007): Model based Analysis of an Ultrasonic Percussion DrillIn: ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering
  • Richter, B.; Twiefel, J.; Hemsel, T.; Wallaschek, J. (2007): Model Based Design of Piezoelectric Generators Utilising Geometrical and Material Properties2006 International Mechanical Engineering Congress & Exposition (IMECE 2006), 5-10 November, Chicago, Illinois, USA
  • Richter, B.; Twiefel, J.; Sattel, T.; Wallaschek, J. (2007): Design Method for Piezoelectric bending Generators in Energy Harvesting SystemsIn: Active and Passive Smart Structures and Integrated Systems 2007, San Diego, USA, SPIE, 2007, Bd. 6525, Nr. 652504
  • Siewert, C.; Panning, L.; Hohl, A.; Bürge, A.; Gerber, C. (2007): Damping of Structural Vibrations using an Electromotive Eddy Current DamperProc. Appl. Math. Mech., 7: 4040039–4040040
    DOI: 10.1002/pamm.200700739
  • Twiefel, J.; Potthast, C.; Mracek, M.; Hemsel, T.; Sattel, T.; Wallaschek, J. (2007): Fundamental Experiments as Benchmark Problems for modelling Ultrasonic Micro-Impact ProcessesJournal of Electroceramics
    DOI: 10.1007/s10832-007-9169-4
    ISBN: ISSN 1385-3449
  • Twiefel, J.; Richter, B.; Sattel, T.; Wallaschek, J. (2007): Power output Estimation and Experimental Validation for Piezoelectric Energy Harvesting SystemsIn: Journal of Electroceramics
    DOI: 10.1007/s10832-007-9168-5
    ISBN: ISSN 1385-3449
  • Denkena, B.; Neuber, C.-C. ; Kallage, F. ; Panning, L. (2006): Aufbau und Regelung einer Magnetführung für WerkzeugmaschinenProc. Appl. Math. Mech., 6: 801–802
    DOI: 10.1002/pamm.200610380
  • Panning, L. (2006): Symmetric and Asymmetric Underplatform Dampers for Turbine BladesProc. Appl. Math. Mech., 6: 251–252
    DOI: 10.1002/pamm.200610106
  • Schmidt-Fellner, A.; Siewert, C.; Panning, L. (2006): Experimental Analysis of Shrouded Blades with Friction ContactProc. Appl. Math. Mech., 6: 263–264
    DOI: 10.1002/pamm.200610112
  • Siewert; C., Panning, L.; Popp, K. (2005): The Vibrational Behavior of Bladed Disks in Consideration of Friction Damping and Contact ElasticityProc. Appl. Math. Mech., 5: 131–132
    DOI: 10.1002/pamm.200510046
  • Panning, L.; Sextro, W.; Popp, K. (2003): Design of Friction Dampers for Mistuned Bladed DisksProc. Appl. Math. Mech. 3, 118–119
    DOI: 10.1002/pamm.200310336
  • Panning, L.; Sextro, W.; Popp, K. (2001): Vibrational Behaviour of Turbine Blade Assemblies with Friction DampersZeitschrift für angewandte Math. Mech. 81, 207-208, Berlin

Patentschriften

  • Hoffmann, T.; Jahn, M.; Panning-von Scheidt, L. (2018): Elektromagnetischer Schwingungsanreger zur Schwingungsanregung der Schaufeln eines SchaufelkranzesPatent DE 10 2017 114 153 A1 2018.12.27, Offenlegungsschrift vom 27.12.2018
  • Szwedowicz, J.; Kappis, W.; Panning, L.; Schwarzendahl, S.M.; Neubauer, M.; Hohl, A.; Wallaschek, J. (2011): Verfahren zum Dämpfen von während des Betriebes auftretenden mechanischen Schwingungen in einer Turbomaschinenschaufel, Turbomaschinenschaufel zur Durchführung des Verfahrens sowie piezoelektrisches Dämpfungselement zum Einbau in eine solche TurbomaschinenschaufelEuropäische Patentanmeldung EP 2 458 150 A1, 04.11.2011

[nicht kategorisiert]

  • Bürge, A. (2010): Dissertation: Modellierung und experimentelle Parameteridentifikation nichtlinearer Reibkontakte bei Turbinenschaufeln Berichte aus dem IDS, Band 01/2010.
  • Christel, R. (2010): Dissertation: Aktive Schwingungsminderung an gekoppelten Zylindern in Rollenoffsetdruckmaschinen mittels piezokeramischer Aktoren an den Lagerstellen Berichte aus dem IDS, Band 02/2010.
  • Neuber, C.-C. (2010): Dissertation: Aktive Schwingungsreduktion durch Magnetführungen Berichte aus dem IDS, Band 03/2010.
  • Zhao, S. (2010): Dissertation: Investigation of Non-contact Bearing Systems Based of Ultrasonic LevitationBerichte aus dem IDS, Band 04/2010.
  • Neubauer, M. (2009): Schwingungsdämpfung mit beschalteten Piezowandlern und Anwendung zur Unterdrückung von BremsenquietschenBerichte aus dem IDS, Bd. 2, Dissertation, Hannover, Germany
  • Schiedeck, F. (2009): Entwicklung eines Modells für Formgedächtnisaktoren im geregelten dynamischen BetriebBerichte aus dem IDS, Bd. 3, Dissertation, Hannover, Germany